Oninit® Archive
Results for “TEMPTAB_NOLOG”
Not enough room in ROOT DBspace
It looks like your physical log is taking up most of your space. I would imagine that this was moved and grown in your other instance. Dan -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of STEVEN AB Sent: Wednesday, January 04, 201…
Problem with UPDATE STATISTICS
Gustavo: All versions of Informix accept/support the WITH NO LOG option to the CREATE TEMP TABLE DDL statement, from Online v4.01 all the way through IDS v12.10. In v11.50 and later it is truly optional because there is an ONCONFIG parameter, TEMPTAB_NOLOG, that makes WITH NO LO…
Error in COMMIT WORK when trying to add a chunk
@Jacob, I may be misremembering, or maybe things have changed in recent versions of Informix, but in general, it is better to have several smaller logical logs than a few (or a single) large ones. This is because the LTXHWM and LTXEHWM percentages are based not on the percentage…
oncheck warning,What impact will it have on the future?
Ok, I make sense. Althrough I can't see that parameter in ONCONFIG, but it really exists with default value. ------------------------------ chuan lu ------------------------------…
Large memory segment vs smaller ones
No ONCONFIG changes are required. ------------------------------ Doug Lawry Oninit Consulting ------------------------------…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Logical Logs - Flags and backups
Hi Mark, The "B" in the 3rd position means that the logical log has been backed up, which is good! The log backup will be triggered by the script referenced in your onconfig file with the parameter ALARMPROGRAM. It is called each time a logical log is filled or logical log is sw…
restore through STDIO
HI, ifxclone can change the onconfig on the target instance E.g. it will turn off DIRECT_IO and can also change bufferpool entries! Regards, David. ------------------------------ David Williams ------------------------------…
Problems with temporary dbspaces
Hello, Change the DBSPACETEMP entry in onconfig file , separated them with semi colon (;), instead of comma (,). Rebounce ids, and see whether the error disappear. Hope it works -Fauziah-…
ontape does not finish the backup: tape full
TAPESIZE in the onconfig set to zero? Backups to disk running into a tape full and asking for a second tape should not happen. Hal Maner M Systems International, Inc.…
Logical Logs/Physical logs
IDS 12.10.FC12 Solaris 10 1/13 If you had to choose having a separate dbspace for logical logs or physical logs, but not both, which would you choose? I'm uncertain which is likely to generate more I/O. Thank you. Regards, DG ------------------------------ David Grove -----------…
Block during checkpoint
I wrote you a LONG reply yesterday, but for some reason it would no save and just kept spinning. Several hours later the form just cleared itself and I have start over. So here goes, this will be shorter so if you need clarification on anything, reach out to me directly. Several …
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
Phys Log Size Inconsistency?
Disregard. I confused the ONCONFIG parm with the actual phys log. Forgot to actually run onparams! My total bad. DG…
Spaces and Spindles: Thought Experiment
For extra credit, consider having two dbspaces for logical logs (odd and even). DG…
Number of logical logs growing ?
This is what I've found in logs at the time of crontab ontape -a jobs ( no one was connected to the db, neither no jobs were usign it ): 17:20:01 Logical Log 47416 - Backup Started 17:20:01 Logical Log 47416 - Backup Completed 17:20:01 Logical Log 47417 - Backup Started 17:20:01…
RSS: Different # CPUs?
Those were my thought exactly. But, was uncertain whether RSS required identical settings in ONCONFIG as the primary. Thank you. DG…
Identifying types of temporary tables
Hi gurus, I want to catch de application that is consuming a lot of space of temporary dbspaces. I know there is no direct way to associate sessionid with use of temporary space. Moreover, there are temporary tables that are created internally by the engine. Do you know when is…
creating transitory table
Hi Everyone, I have an requirement to use a temporary table which have to be created globally and need user level access to that table to view only particular user data. Same concept like GTT(Global temporary table) table. Is this possible in Informix, or any other way to fulfi…
Reading logical logs of informix
Is it possible to find what was being written in database at a certain point of time by reading logical-logs?…
IDS 12.10 - temporary dbspaces locked
The TBLSpace is an Informix internal table, used to keep track of all partitions in a tablespace (https://www-01.ibm.com/support/docview.wss?uid=swg21174940). What you are seeing is sessions that created what I suppose are temporary tables in the temporary dbspaces. The IX (Int…
Users using temporary dbspaces
Hi Ben, can i see this way all the sessions using the temporary dbspaces? or just the ones who are created temporary tables?…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
onmode bug discovered (-wf)
Don't believe in a bug here. When starting the server he knows about the onconfig-file from the environment variable ONCONFIG. If you change this variable when the server is running it will not know the new value. Assuming that variable is only read once during the startup of th…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
ROOTDBS file
I did not find the AUTOLOCATE parameter in onconfig file as well as onconfig.std file also. Im using IDS 12.10 FC8 version…
Update Statistics
what kind of things could I check in the onconfig file. They are working on getting me IBM technical support help, but that will be a few hours away.…
IDS not writing to online.log
Hi Art, tried that already. When I add a logical log I will see the corresponding entry in online.log and a checkpoint, and nothing happens after that. And I can't switch the logical logs because onmode -l is not working…
IDS 12.10 - Query Slow
Hi, I means value on onconfig 12.10 same or better than value onconfig IDS 11.10. i don't copy onconfig file and put on IDS 12.10. I already rebuild of your statistics is highly. We don't have performance issue for overall our system, only a few program, especially program runn…
Long transaction problem
When IDS will used up all the logical log? i.e. the log file below the current logical log file has open transaction also . thanks for your time.…
Rss impacting performance
Hello. Please take a look at your LOG_INDEX_BUILDS and TEMPTAB_NOLOG parameters, to make sure they are following the recommendations. Regards. Em 25 de ago de 2016 7:34 AM, BENJAMIN THOMPSON <benjamin.thompson@skybettingandgaming.com> escreveu: If RSS_FLOW_CONTROL is definitel…
Need assistance on spreading logical logs
IDS 11.70 I need advice on how to setup a spread of logical logs over at least two disks. the idea behind this is to enable one logical log to be backed up and another being used which may improve performance.…
srt* files PSORT_DBTEMP DBSPACETEMP strange
This is a very opaque area of the engine. I wrote a blog post about user-generated temporary tables which touches on this topic a while ago: https://informixdba.wordpress.com/2015/03/29/temporary-dbspaces/ What specifically is causing the srt files to be created. I see you can …
ON-Bar database server is dismissing the logical
Thanks Art and Martin. IDS bounce worked as onconfig was changed for LTAPEDEV earlier. Thanks, ~ Pravin Bankar…
DBSPACETEMP Parameter
Hi, The DBSPACETEMP Parameter in onconfig file create automatically the temporally dbspaces ? Or They must be created with onspaces utility. Thanks in advance.…
Mutex logs on logical log flip
IDS 11.50 on Solaris We've only just started noticing this odd occurrence. I t only just have started happening or it may have been happening for ages but there's more focus upon it now. Our customer's monitoring was detecting occasional periods of slow queries, perhaps persist…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
Performance issue after migrate to IDS from Online
.parenthesis. Of course, I don't write TEMPTAB_NOLOG in 4GL code, but WITH NO LOG in create temp table. .parenthesis. By the way, can I edit a posted message?…
Informix temp spaces
Hi Boycho, I have TEMPTAB_NOLOG 1; Do you think it will be good practice to set it on "0"? I have configured and two RSS servers.…
Insufficient space in temporary dbspaces
Hi, >>>> My IDS log is reporting "Insufficient space in temporary dbspaces" and I think I have enough space. IDS: IBM Informix Dynamic Server Version 12.10.FC5WE Platform: CentOS release 6.6 Spaces: | [informix@lpsalxids ~]$ onstat -d | | IBM Informix Dynamic Server Version 12.…
View with left join.
Hi Marco/Fouad, I would be interested to see the DBSPACETEMP set up. I know the engine has logic that means it will look at all the spaces listed in DBSPACETEMP and if none of them has enough free space to create the temporary table, it will use ROOTDBS instead, regardless of h…
BTS fails after ontape Restore
Hi Mark, Backup is done by 'ontape -s -L 0' Restore was done with 'ontape -r' No extra special parameters. And as I was typing this email, I was collecting the appropriate BTS-related lines from the 4 onconfig's in play (we use a special 'backup' onconfig for ontape). Lo and b…
Root db space fills up
as metioned above, maybe you need set TEMPTAB_NOLOG in you onconfig file…
Error Message in online.log file
Hi André. What setting do you have for ALRM_ALL_EVENTS in the $ONCONFIG file? I have found "alarmprogram.sh" can loop if set to 1. Regards, Doug Lawry…
RSS not working
Have you tried changing: LTAPEDEV /llog/drcallog to LTAPEDEV /dev/null to see if the logical log backup is causing the message?…
Setup HDR
Sounds like the onconfig has the same STACKSIZE but what both servers read in at initialization is different. Bounce both servers and see if it's fixed.…
Physical Log size 2000 is too small
Hi, the onconfig we are using is from a inf version 9.7 wherein no PLOG_OVERFLOW_PATH located in it. I tried adding it to the onconfig and put a location but the inf instance when restarted still always fails. As for the onmode command we are always using onmode -ky maybe it's b…
Informix 11 to 12 Upgrade ... "error"
Dirk: This is definitely a "it's supposed to work that way." But there may be a contributing item. Do you have TEMPTAB_NOLOG set in both versions' ONCONFIG or only in the v12 ONCONFIG? Guessing here: If TEMPTAB_NOLOG is set then all temp tables are non-logging unless they are p…
ERROR doing ontape
Thanks for your response! So, is it possible to create a new dbspace then set it in $ONCONFIG and restart the instance? best regards…
virtual segment question
Did you try to increase the number of locks in the LOCKS parameter in Onconfig? Lloyd…
ontape error message
Increase the value of TAPESIZE parameter in onconfig and try the backup. Lloyd…
Onconfig name
Hi, I am developing a JDBC application, and need to read from within SQL the onconfig environment variable. From with IDS 11.70, I can extract the need information using the query: select trim(env_value) env_value from informix.sysenv where env_name = 'ONCONFIG'; The code nee…
DBSPACETEMP, sorting, temporary tables...
Hello gurus, Temp dbspaces are for sorting and for temporary tables. These dbspaces are actually disk spaces. We don't have a way to sort or to create temporary tables in memory, do we? Memories are getting less and less expensive, wouldn't it be much faster to use memory instead…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
Problmes using ontape with an IBM TS2900 changer
The TAPEDEV section in the onconfig is as follow: TAPEDEV /dev/IBMTape0 TAPEBLK 512 TAPESIZE 0 We have played with the TAPEBLK from 512 to 4096 to no avail.…
Re: Sysmaster - Tabelas Temporária
On 20/01/14 17:20, Fernando Nunes wrote: > I'm not absolutely sure I got your requirement correctly... You say: > > "a program that runs once .... keep the session alive": > You cannot keep a session alive without a program running. > > Then you say: > "I need to drop temporary t…
Sysmaster - Tabelas Temporária
Hi folks, I need to write a program that must run once, create some temporary tables and keep the session alive. The user must to be able to run again, without close the session. I need to drop temporary tables(if it deos exist) and recreate then again. Does anybody knows what sy…
DYNAMIC_LOGS=2 Functionality?
Hi, Silly question ... do you backup your logical logs? If you do want to backup your logs, then consider using ALARMPROGRAM to backup logical logs when complete (using onbar or ontape) - that way you should not encounter full logical logs because they are not being backed up. …
Logical log backup
Folks, IDS11.50FC8 , Linux We have a couple of boxes , all are setup to do automatic logical backup. Once the current log is full, it triggers the alarm procedure to start a backup. It works great. But, The interesting thing is, some servers do not always backup a full logical…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
How to set up temporary space per session
Hi, I have an application that creates large temporary tables, causing temporary dbspaces are full. This hurts the entire instance. At the moment it is not possible to change the application. One solution would be to increase the size and / or amount of the temporary dbspaces, b…
recover SQLHOSTS file
Do the onconfig files also have that info?…
Auto Update Stats
Hi, I have one more query. I have the below entries in onconfig file for AUS AUTO_STAT_MODE 1 STATCHANGE 10 USTLOW_SAMPLE 0 Now all my tasks(mon_table_profile,Evaluator and Refresh) running fine at scheduled time. Now when I remove the above entries in onconfig file, still al…
Why Temp Table created by View using DATA dbspace
What is DBSPACETEMP set to in your user environment and in the server's environment? Your's takes precedence if it is set! If set to an empty string that will override the server's setting and put temp tables in the database's home dbspace. Also, you should set TEMPTAB_NOLOG in y…
Temporary tables called th_overflow_ffffff
Hi, I have applications that create several temporary tables. I'm monitoring which tables are created and I see several tables with tabname = "th_overflow_ffffff" and dbsname = 'HASHTEMP' This is the query that I use: database sysmaster; select b.dbsname ,b.tabname ,a.ti_nptota…
Performance Tuning Discussion
Ok it seems you have a big hardware, what´s your Informix version? What´s your box architecture? For performance tips, there is a good article in Andrew Ford´s blog, that should clarify your thoughts.... http://www.informix-dba.com/p/informix-innovator-c-tuning-basics.html This…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Page size
Where do you set the page size when configuring Informix? I don't see it in the ONCONFIG anywhere.…
Map temp tables to session
Understood, but rather odd. Internally created temp tables should be following TEMPTAB_NOLOG and be created in a temp dbspace. I note that others have posted queries to get you the links you need to track down the culprits. Art Art S. Kagel Advanced DataTools (www.advancedatato…
Re: manually edit onconfig?
You should never install the new version over the current one. If something goes wrong in the upgrade you'll have much more work to recover. Regards On Mon, Dec 17, 2012 at 6:38 PM, June Nebab LKINY <jnebab@gmail.com> wrote: > Planning an upgrade to 11.7UC6GE from 11.7UC5GE. I…
RE: manually edit onconfig?
I would give a try to the new onconfig_diff utility, it seems to help you identify and correct some of them.... Check it out! https://www.ibm.com/developerworks/mydeveloperworks/blogs/idsteam/entry/how_to_use_the_onconfig_comparison_tool_onconfig_diff3?lang=en Regards. Alexand…
Re: manually edit onconfig?
I'm a big fan of copying the current settings into the new ONCONFIG file. It gives you a good chance to see the new parameters, like those you mentioned - all of which were available in 11.70.xC5 BTW, so someone used an older ONCONFIG instead of editing the new one last time. By…
Re: manually edit onconfig?
Figure out what each of the new ones do, whether you want to use them or not, then add them to your old onconfig. Ideally on a test environment. j. On Dec 17, 2012, at 1:38 PM, June Nebab LKINY wrote: > Planning an upgrade to 11.7UC6GE from 11.7UC5GE. Installing new version o…
manually edit onconfig?
Planning an upgrade to 11.7UC6GE from 11.7UC5GE. Installing new version on same $INFORMIXDIR and on same server. I noticed new onconfig params (ie: AUTO_READAHEAD, NUMFDSERVERS, etc) that are in the UC6GE onconfig.std that are not in my $ONCONFIG. What is the proper way to dea…
Add more logical logs in IDS 9.4
Hi All, I'll be performing adding logical logs into our existing DB. My question are the following: 1. Do the DB needs to be in quiescent state? i believe, there's no need at all. Once i have added the new dbspaces to be used by the logical logs, i will drop the existing ones …
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
Error # 40002
Also set AUTO_REPREPARE 1 in your $ONCONFIG file. Regards, Doug Lawry…
Temporary Tables Structure, how to get it ?
Hello, is there any sql to get the structure of a temporary table,like colunmn names and data types?. I couldn't find this information in the sysmaster tables or in the sys*tables, and neither googling. Thanks in advance Marcos Cassinerio…
Any resolution steps for this failed llogdbs that
IDS: IBM Informix Dynamic Server Version 11.50.FC9W1X7 OS: Sun Microsystems Inc. SunOS 5.10 Generic January 2005 I'm having the Systems Admin to review the disk now. 14:13:25 Assert Warning: I/O error, Primary Chunk '/ifmx/ciboodle/chunks/llogdbs_4' -- Offline 14:13:25 IBM Info…
Determining cause of DR ping timeout
Thanks Keith, My two systems are connected via LAN at 1Gbps on the same pair of stacked Cisco 3750X switches. No maxing-out of network links. The replication happens over dedicated private vLan links to avoid contention for bandwidth. I also have very small databases, most are l…
Re: help with informix on windows oncheck -pr erro
ok sounds like silly question but how do i find out what ONCONFIG variable is on windows ? which is likely to be correct set ONCONFIG=oncfg_apecert.0 ::set ONCONFIG=ONCONFIG.apecert…
Config Help
Your biggest performance problem is that you are running your server on a VM. IO performance under VMWare is VERY VERY POOR and, as I've said several times already this month, databases live and die on IO performance. Art Art S. Kagel Advanced DataTools (www.advancedatatools.co…
Re: Strange behaviour when using a view in 11.....
I am having the same issue on 11.70.FC4. I set the TEMPTAB_NOLOG to 1, I've bounced the server, I've dropped/recreated the views in question, and my rootdbs is still filling up.…
doubt about parameters (PDQ)
Sorry people, I meant the MAX_PDQPRIORITY 100 onconfig parameter.…
What are best onconfig parameters for a DSS app
Frank.... first question: Is your database installation being made for a production system???? Alexandre Marini IBM Informix Certified Professional v10 / v11.50 / v11.70 IBM Information Management Informix Technical Professional IBM Infosphere DataStage Technical Professional …
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
non-log and logical log buffer
Hi, If a database is non-log, do update/insert/ go into the logical log buffer? thanks for your time.…
Strange behaviour when using a view in 11.70.FC2
Better still, set TEMPTAB_NOLOG 1 in your $ONCONFIG file and restart, so that WITH NO LOG becomes the default behaviour. Also check your temp spaces really have been created with the "-t" flag by looking for "T" in "onstat -d". You can also set environment variable PSORT_DBTEMP …
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
Cognos and Informix are not playing nice together
Art & Everett I checked and I do have TEMPTAB_NOLOG set to 1. Thanks for the idea. John -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Art Kagel Sent: Thursday, February 09, 2012 3:46 PM To: ids@iiug.org Subject: Re: Cognos an…
NOFUZZYCKPT: onconfig parameter or environment variable?
Is NOFUZZYCKPT an onconfig parameter or an environment variable? Is there any definitive documentation? Still running IDS 10 on Linux.…
Testing the 'free' versions - moving from Dev edition to Innovator-C
Art, thanks - I've gone for the separate INFORMIXDIR install (just had to change $INFORMIXDIR, $PATH and some paths in $ONCONFIG) and it's come up just fine.…
Restore + Logical log - caution
The last weeks I discovery a behave of the engine what is something new for me. I believe others will be surprised too... IFX 11.50 FC9 When you restore an archive with logical logs , maybe you needed the files/tapes of logical logs backuped before the Archive Level 0. The rea…
Spatial Data
hello reading thru the manual states that the ONCONFIG parameters for SBSPACENAME and SYSSBSPACENAME must be set for the default sbspace. We are running an HDR pair and have the parameters set on the Primary Server - does it also need to be set on the Secondary Instance ? thank…
CLR vs Long Transactions...
Immediately backing up your log doesn't automatically make it available for re-use. A long transaction is a function of how many logical logs a transaction spans (stays open) with respect to the amount of logical logs you have defined. In your situation every time you do a log sw…
Long transaction
Hi, when long transaction being rollback, could others execute SQL select that don't write logical log? thanks.…
RSS with DELAY_APPLY is dog slow!
Hi Nick, FYI, RSS_FLOW_CONTROL did not come out until 11.50FC8 unless you received it in a patch for 11.50FC7. How far away is your RS server from your primary? Jeff -----Original Message----- From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Beha…
Issues after upgrade
Hi, I have error messages after the upgrade from 7.31 to 11.5 In 7.31, the output of oncheck -pe was: ... LOGICAL LOG Pages - Log 52 456063 8000 LOGICAL LOG Pages - Log 53 464063 8000 LOGICAL LOG Pages - Log 54 …
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
stupid question time
select tabname from systables where dbinfo('dbspace', partnum) = 'rootdbs'; Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on …
Query to list temporary tables
Does anyone here have an sql query for me, for selecting temporary tables, their owner, and the dbspace they reside in ? Dirk ________________________________ NOTE: This e-mail message is subject to the MTN Group disclaimer see http://www.mtn.co.za/SUPPORT/LEGAL/Pages/EmailDisc…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
update statistics generated automatically?
Hello Alexendre, Thanks for your quick response. No, it's not on a temporary table. It's an existing, rather big table (more than 8 million records) which is only used for selections...…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
ontape -p/r with changed ROOTPATH
Jack Parker Wrote: ================================================================================ Not sure if you noted that you also need to change your $ONCONFIG = ROOTPATH to point to what is on the backup image. j. ==========================================================…
question about Query with joined view
Have you tried "IFX_FOLDVIEW 1" in your environment or $ONCONFIG file? Regards, Doug Lawry…
Error -19816: Cannot perform this operation on a
The error message/code has nothing to do with your HDR replication which permits dropping a table. Either the table in question is defined as a replicated table using Enterprise Replication or there is an active Change Data Capture (CDC) session open that is using the CDC API to …
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
sqlerr:-243 and isam err:-111 in esql/c
This "may" be a good place for USELASTCOMMITTED set to all in the onconfig.…
Primary Slowness when RSS is active
You need to set LOG_STAGGING_DIR parameter in onconfig of the rss…
Re: Index on temporary table?
The problem is that the table didn't exist when the stored procedure was created so the stored query plan is invalidated by the create temp table statement. If you change the CREATE INDEX to a dynamic statement it should be OK. So: EXECUTE IMMEDIATE "CREATE INDEX t_data_ix1 ON t…
Re: Index on temporary table?
Yes, it's possible... Your error has nothing to do with the fact that the table is temporary... You probably have some PREPAREd statements on the table done before the index creation.... If possible delay them to after the CREATE INDEX... Regards. On Mon, Aug 23, 2010 at 4:52 P…
RE: Index on temporary table?
It is possible to index temporary tables, however, the temp table is still only visible to the session that created it, so if your script exits before you try to access it, the temp table will be gone. If your script is echoing a statement to dbaccess, then as soon as it exits, t…
Index on temporary table?
Is it possible to create an index on a temporary table? I have a script that creates a temporary table worth of data and then does a great deal of selects and parsing of the data inside of it. I was thinking of putting an index on a few key columns in the table to speed it up but…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Re: RE: new onconfig parameters added onconfig fil
Typically, I make a copy of the onconfig.std, naming it something like cheetah_online. Then I open up both the old and new onconfig, side by side, and copy from old to new. Obviously, the new onconfig has new params that were not addressed in the old onconfig and may have elimina…
Re: RE: new onconfig parameters added onconfig fil
Isn't that what I said? "If you simply just bring up the instance using your old onconfig, I believe that you will get whatever the default is for the new parameters, even though you do not mention them in your old ONCONFIG." -----Original Message----- From: ids-bounces@iiug.or…
new onconfig parameters added onconfig file 11.5
most of these aren't new at all. Some have been around since 7.10. Some were undocumented until around 9.30 or so. Others were new in 9.40 or 10.00. There are a few really new ones, but, the server upgrade does not, to my knowledge, update the ONCONFIG file at all. Art Art S. K…
Display contents of Logical Log
Is there a way to display the contents of the logical logs if the LTAPEDEV parameter is set to backup the logical logs to a directory? (LTAPEDEV /informix11/inflog) I had a look at the onlog command and in that the -d switch accepts the tape drive path. Appreciate your response…
AIX 5.3 IDS 11.50 FC5 - Performance Advisory
Have any of you experienced this? In reviewing the online.log, I discovered that AFTER a system reboot, and ONLY AFTER a system reboot, the first time the "Auto Update Statistics Refresh" begins, the following performance advisory is recorded. The Backup occurs nightly, the AUS …
Comparing by Date, Time & Seconds columns
> Oh, I forgot to add in that the informix database is a read only DR > server. So, we are not able to alter the table structure, create > stored procedures/functions or temp tables... It's a pain in the neck > dealing with the vendor and informix. I wish there was an easy > sol…
Re: performance improvements for dbimport?
Thanks for all your valuable input. I changed some parameters now: 21:09:27 Onconfig parameter BUFFERPOOL modified from size=2K,buffers=262144,lrus=8,lru_min_dirty=5.0,lru_max_dirty=10.0 to size=2K,buffers=524288,lrus=8,lru_min_dirty=10.0,lru_max_dirty=50.0. 21:09:27 Onconfig p…
BACKUP_FILTER in onconfig
Hello, when I using BACKUP_FILTER in $ONCONFIG, parameter for "The tape block size, in KB, for backing up logical logs" is NOT LTAPEBLK, but it is TAPEBLK. Everything work fine (LTAPEBKL for logical log) when I turn off BACKUP_FILTER ... This is happening with ontape, with BAC…
How to tell if a given temporary table exists in the current session?
John Hardin wrote: > Folks: > > I have a need to detect and drop temporary tables from SQL if they exist > in my session. It's the standard > > IF EXISTS temp_table_x THEN > DROP TABLE temp_table_x; > END IF; > SELECT ... INTO TEMP temp_table_x; > > logic. > > I a…
garbage text in SHMNOACCESS parameter
On Jan 21, 8:15 am, Ian Michael Gumby <im_gu...@hotmail.com> wrote: > Just a guess. What's the hex value for that string? > grep ^SHMNOACCESS onconfig SHMNOACCESS �����������" ������� grep ^SHMNOACCESS onconfig |cut -c17- �����������" ������� grep ^SHMNOACCESS onconfig…
Random Server Slowdown "Redone"
There are some usual things you could do for now: 1) calc your database ratios, I think there are several NETTYPE, BUFFERS and even BTSCANNER options that could be optimized, you could download Mr. Art script to automatically know these important numbers!!! It´s on the download …
Update query with table reference in subquery
The UPDATE, INSERT, or DELETE statement uses data taken from the same table in a subquery. This action is not allowed because of the danger of getting into an endless loop. Select the input data into a temporary table first, and then refer to the temporary table in the UPDATE or …
Long Transaction Despite DYNAMIC_LOGS = 2
Clifton, my inputs are as followings: The transaction by the user "ifxcmgt" spanned 2.2 GB (LTXHWM=70%) out of 3.1 GB total logical log dbspace (~33000 KBx100 or 3.1 GB); therefore, it was defined as a long transaction and was rolled back. Transaction rollback and other process…
Re: Upgrade from 9.4 to 11.10
One thing I noticed is you have lots of little logs - 85 12M logs for a total of 1Gig. IDS 11 prefers larger log files so that it does not fill and switch too quickly (which might occur during the batch processes). It will give you a warning in the alert log when/if that happen…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
Dropping temporary TBLspace 200464, recovering
Dear All.... I've noticed that while I onmode -ky IDS(my case,IDS 7.31.UD8) , I got the messages in online.log : Dropping temporary TBLspace 200464, recovering 8 pages. Dropping temporary TBLspace 200465, recovering 8 pages. Dropping temporary TBLspace 200467, recovering 8 page…
DYNAMIC_LOGS in ONCONFIG
Good afternoon, We occasionally have a programmer than needs a large amount of log space to move a very large table. Instead of fiddling with the HTXHWM and LTXEHWM in the ONCONFIG file, has anyone successfully setup DYNAMIC_LOGS with IDS 10.00 on HPUX? Where would the dynamic …
Unsufficient buffer size for error message
Hi Please check your online.log and check also your onconfig file. thanks.…
how to free up logical logs
Hi All, I've encountered problem on logical logs once again... I'm using onbar on backing up the logical logs and dbspaces. Unfortunately, the netbackup failed and causing the "logical logs" full. Q: what is the correct solution, without losing the logical logs? Is there any wa…
ontape -c
I use 'ontape -c ' to backup the logical log, if the 'ontape -c' process was terminated abnormally, for example, the machine crash or it was killed by others, do anybody know if I could restore those logical log sucessful?…
Logical logs backup
Hi Martin, Thanks for your response! Correct me if my clarification is wrong! At one point of time, the status of the logical logs is Logical log 4 to 7 -> U_B__ Logical log 8 -> U_C_L Logical log 9-13 -> U_B__ All the logical logs are 100% full When i did a level 0 backup, th…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Insert into an indexed table is really SLOW!
MIKE DUNHAM-WILKIE wrote: > I am running into performance problems inserting into an indexed table, using > Informix 11.50. The following timings for loading into > compressed/uncompressed, indexed/non-indexed tables using dbload/HPL-Deluxe > more illustrate the problem. The numb…
Reducing logical log space
I'm looking for reassurance, really ... IDS 10.0FC8 on HP-UX 11.31. HDR running. My customer is running out of disk space on its production system, and cannot provide any more at all for Informix for a couple of weeks (don't ask!). As the application dbspaces will likely not l…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
connect through java using group_name con mgr
Hi Kamran Regarding to your first problem. Onstat -g cmsm should display information feeding by your cmconfig file. Basically, it will display SLA and FOC rule. So it will not display information from your sqlhosts file. About your second problem. You used the wrong port number…
Extracting logical logs from a level1 archive ?
Is it possible to extract the logical logs from a level1 archive to use for rolling forward ?…
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
oninit fails reporting problem with DBSPACETEMP
But in my ONCONFIG file, i have mentioned the tape device as STDIO…
Location of physical and logical logs
This may seem like a bit of stupid question but how do I find out in which dbspace the logs are on a system I didn't set up? Thanks -- Regards Scott Newton | R&D Solution Specialist | Integral Technology Group Ltd 95 Ascot Ave, Greenlane | PO Box 302313, North Harbour, North Sh…
Changing TAPEDEV from script
sed -e 's/^TAPEDEV/TAPEDEV NEW-TAPEDEV/g' onconfig > onconfig.other export ONCONFIG=onconfig.other after finishing just set the ONCONFIG to your default and delete onconfig.other Sebastian…
Re: Logical Log files MISSING
Bigger logical log files?…
Logical Log files MISSING
Hello Ive checked the online.log file for one of the missing log 20084 23:12:22 Logical Log 20083 Complete, timestamp: 0x8e06d245. 23:12:22 Logical Log 20084 Complete, timestamp: 0x8e06d245. 23:12:22 Logical Log 20083 - Backup Started 23:12:23 Logical Log 20083 - Backup Comple…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Query Regarding Temp Dbspace
It is always a good idea to include one or more 'normal' dbspaces in DBSPACETEMP for logged temp tables to keep them out of the ROOTDB. Choose dbspaces with very low IO activity (see onstat -D) and lots of free space. Root gets significant read activity on most systems so it best…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
Re: what is using tmp dbspace ?
Hi. If you use oncheck -pe your-temp_dbspace you'll see existent temporary tables with their owners, which would be people who is using temporary space. I hope you find this useful Omar --- Floyd Wellershaus <floyd@fwellers.com> wrote: > Is there a…
Understanding the Logical Log Usage
Am using version 10.00.UC7X1 and have a few *basic* questions on the usage of the logical log file. The database has a logging mode of unbuffered logging with a page size is 2048 bytes (as returned by onstat -b). I have 3 log files with each file being 5000 KB in size. I have a …
Re: Restoring a logical log
ian.miell@gmail.com wrote: > We have some scripts which parse the output of onlog -n/-l and > produces user-friendly output. > > We've been given a log file from backup which has the header: > > [xxxxxxl@xxxxxxx] 43$ hd llog.631510 | less > 00000000 ff ff ff ff ff ff 00 00 00 0…
Restoring a logical log
We have some scripts which parse the output of onlog -n/-l and produces user-friendly output. We've been given a log file from backup which has the header: [xxxxxxl@xxxxxxx] 43$ hd llog.631510 | less 00000000 ff ff ff ff ff ff 00 00 00 0a 00 09 00 9d 07 5f |..............._| …
Re: How can fetch cause long transaction
> I have one more question: > > When DYNAMIC_LOG is set 2, does it starts to add more logical logs > dynamically when next logical log in the sequence has open > transaction. Does this become active only during roll back and next > logical log has an open transaction or could it …
One temp space fills and 4gl fails
Hmmmmm, according to the IBM Informix Dynamic Server Administrator's Guide, "If you have more than one temporary dbspace and execute a SELECT statement into a temporary table, the results of the query are inserted in round robin order." It doesn't mention explicitly fragementing …
locking error (problem)
Keith, We are using Informix 4GL. I was just thinking of using temporary tables to put the modified things in it and than at the end treath all the records at once. Temporary tables because lots of changes can happen during the control of the invoice. The invoice it self is al…
Logical Log
Version IDS 10 When DYNAMIC_LOG is 2 and logical logs gets full Informix starts to write to rootdbs and Informix uses LOGSIZE from what was used initially for disk space initialization. And it appears like even if the LOGSIZE is changed using onparams or in onconfig file, Inform…
Logical log for Temp table
falconsoon@gmail.com wrote: > From informix manual, I found that any logical database operation will > be logged in logical log. However, will any logical operation on > temporary table be logged too in logical log. I ask this question as > it is non sense to log logical operatio…
Re: onconfig recommendations
mosserp@wellsfargo.com wrote: >> mosserp@wellsfargo.com wrote: >> >>>>> RESIDENT 0 # Forced residency flag >>>>> >>>>> >>>> (Yes = 1, No = >>>> >>>> >>>>> >>>>> >>>>> >>>> Don't know HP model numbers, but it this is a PA-RISC machine, you >>>> almost have to …
RE: onconfig recommendations
> mosserp@wellsfargo.com wrote: > >>> RESIDENT 0 # Forced residency flag > >>> > >> (Yes = 1, No = > >> > >>> > >>> > >> Don't know HP model numbers, but it this is a PA-RISC machine, you > >> almost have to set RESIDENT to -1 to prevent poor performance > >>…
Re: onconfig recommendations
mosserp@wellsfargo.com wrote: >>> RESIDENT 0 # Forced residency flag >>> >> (Yes = 1, No = >> >>> >>> >> Don't know HP model numbers, but it this is a PA-RISC machine, you >> almost have to set RESIDENT to -1 to prevent poor performance >> due to the >> archi…
RE: onconfig recommendations
> > RESIDENT 0 # Forced residency flag > (Yes = 1, No = > > > Don't know HP model numbers, but it this is a PA-RISC machine, you > almost have to set RESIDENT to -1 to prevent poor performance > due to the > architectures restrictions of only four active shar…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Never ending Checkpoint
IDS 9.40.FC4W2 SunOS 5.8 Last Saturday we had a "never ending checkpoint". There are no loggings about the event except the lines in online.log: 11:41:01 Fuzzy Checkpoint Completed: duration was 2 seconds, 2789 buffers not flushed, timestamp: 0x60364810. 11:41:01 Checkpoint …
How HDR resync after network connection resumes
With "RETAIN_TYPE" is set to 1, HDR would be reestablished from secondary server when old primary is up once again. When the logical log backup has been performed on secondary server, how the oustanding logical log could be retrieved for resync to old primary server? 1) Do I ne…
HDR failure handling on network disconnection
Is the process of logical log rolling forward by "ontape" or "onbar" are automatic?…
Re: onconfig recommendations
On Jan 2, 11:09 pm, "Kennedy, Randy" <RKenn...@scottsdaleaz.gov> wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for…
[Fwd: Re: onconfig recommendations]
Kennedy, Randy wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for given > platform. > > Current Server: HP rp5405 …
Re: onconfig recommendations
On Jan 2, 11:09 pm, "Kennedy, Randy" <RKenn...@scottsdaleaz.gov> wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for…
onconfig recommendations
Would like to receive some feedback on our onconfig setup for current platform. This is the 3rd physical server that the database has moved to and just want to ensure we are using the best settings for given platform. Current Server: HP rp5405 4-Way (650 MHz) with 8GB RAM. 1 …
Newbie question-please don't shoot me
I have a newbie question. Please pardon my lack of knowledge with this. I have a Unix server (HP) that houses 2 9.4 Informix database servers (IE: there are 2 separate onconfig files that have unique INFORMIXSERVER parm values). The informix engine stopped (I think because the un…
Difference between Physical and Logical Logs?
It seems the work done by logical log is more than physical log. What is the point of having physical log? As logical log already including post and pre image of database chanages.…
Logical Logs
Hi All Gurus, I'm new to this forum and IDS. Please advise me how to remove/delete the logical logs No.1 till No.3 from onstat -l, i assume flag D indicates DELETE ( pls corret me if wrong) And would it possible to readjust LOGSIZE to smaller value say "16384" from any availabl…
Informix onconfig file configuration
Hello, We recently moved from a quad proc (hyper threaded to 8), 8GB RAM to a 2 socket dual core, 16GB RAM server. In order to maximize the cores and RAM what entries need to be modified, if any? Thanks, Jared…
Informix Engine not starting
Can you please try to increase Physical & Logical log file sizes in Onconfig.bnm Thanks Tara…
Process taking most of Logcal Log
Version: IDS 10 Is there a way to tell which process on the box is filling up the logs. I was thinking if there is a way to tell which process / thread is writing the logical logs or filling up the logical logs…
OFF_RECVRY_THREADS and ON_RECVRY_THREADS
Does these parameters help in logical log recovery. I was wondering if increasing ON_RECVRY_THREADS help in HDR on secondary server.…
HDR Secondary mode Log transfer handling
How the transcation is delivered from Primary Database to Secondary Database? - In a full logical log ? - Any committed transaction at Primary Database? If the transaction is delivered from Priamry to Secondary Database in a full logical log, then any recommendation on the size …
BAR_MAX_BACKUP and BAR_WORKER_MAX
What's the difference between BAR_MAX_BACKUP and BAR_WORKER_MAX. Both seem to be doing parallel/concurrent log backup. Which one should be specified in onconfig ?…
IDS Primary down
Hi all.... In it completes week, my IDS Primary has down in 4 opportunities having shown the following message of error: 03:10:47 Maximum server connections 567 03:11:21 Assert Failed: Exception Caught. Type: MT_EX_OS, Context: mem 03:11:21 IBM Informix Dynamic Server Version 10…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Server Secondary
Hi all: In an architecture Informix HDR it is possible to create temporary tables in the secondary server ???? Thanks _________________________________________________________________ MSN Amor: busca tu ½ naranja http://latam.msn.com/amor/…
Re: Digital UNIX V4.0F + 7.31.FD1 Performance
Thank you, today on evening we make this changes in $ONCONFIG, restart the machine and hope it works! Greetings from Austria…
Logical Logs in Enterprise Replication
Hi All, I am using Enterprise Replication on IDS10 UC5. I have 33 Logical Logs for IDS, each of 5000 pages i.e. 20,000KB. Test >onstat -l IBM Informix Dynamic Server Version 10.00.UC5 -- On-Line -- Up 09:00:11 -- 81408 Kbytes Physical Logging Buffer bufu…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
onconfig problem
when i try to initialize server using oninit following message appears on screen "ONCONFIG can only specify a simple filename whith no path components" plz do replay me how to solve this one…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Re: Splitting logical logs
news.arcor.de wrote: > IDS 9.4 WE, Sola�ris 9 > > Hi everybody, > > we use to back up our logical logs using "ontape -c", for example in a file > named "trans.log". > As a consequence, when restoring a Level-0 backup using ontape -r, we can > only restore *all* logical logs con…
Splitting logical logs
IDS 9.4 WE, Sola�ris 9 Hi everybody, we use to back up our logical logs using "ontape -c", for example in a file named "trans.log". As a consequence, when restoring a Level-0 backup using ontape -r, we can only restore *all* logical logs contained in the trans.log or *no* logic…
RE: Listing all the tables in using a dbspace in Informix
> Make sure $INFORMIXDIR and $ONCONFIG are set and that you have > permissions with your login ID to access them. There is also system > tables that can give you this information. System tables which can list out all the tables in a particular dbspace ?…
Re: onconfig
Hello, apart from editing ONCONFIG directly, some parameters are dynamically changeable: Usage: onparams ... -m <param> <value> ... -m - Modify the value of one of the following configuration parameters: AFFAIL, AFCRASH, AFW…
RE: onconfig
I don't run onbar, but I suspect you're right. LTAPEDEV, etc. would also probably be in this group as well. Either way, restore the old onconfig and you're OK. It may be a good idea to check the permissions on the file before you're done, though... --EEM -----Original Me…
Re: onconfig
I think the onbar config parameters can be changed on the fly as well. ----- Original Message ----- From: "Everett Mills" <eemills@nationalbeef.com> To: <informix-list@iiug.org> Sent: Friday, February 09, 2007 11:45 AM Subject: RE: onconfig > Stan- > TAPEDEV, TAPEBLK and TAPESI…
RE: onconfig
Stan- TAPEDEV, TAPEBLK and TAPESIZE can be modified on the fly through onconfig. Restore your old onconfig and you should be fine. --EEM -----Original Message----- From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf Of Stan Sent: Friday, …
onconfig
Hello. What will happen when during work (online state) IDS unfortunately someone modify onconfig. Which paramaters takes effect immediately (without restrart IDS). Thanks in advance Stan…
Informix produces error -1263 after system time is changed
Also I forgot to mention that the onconfig USEOSTIME is set to 1 (gets time from the host)…
Logical log backups
Hi I am having a dreadful time with a autochanger tape device for which my logical logs and archives are backed up to. Problem being the device frequently stops working and unless it is fixed before the logical logs run out, I get downtime. I am using the networker software to …
Solaris: temporary tables in /tmp VS in a temporary dbspace
Hi Gurus out there! Using IDS 10 on Sun Solaris 10. I have a question about Informix performance when using a dedicated temporary dbspace (properly setup and declared in DBSPACETEMP in onconfig) versus using the default location of temporary tables ('/tmp', which on Solaris is …
Re: infdump
couldn't we at least ask him for a tiny snippet of his online.log - maybe there's more wisdom in such file than you might imagine. Tip: set MSGPATH (in onconfig) to ... ... and don't forget to restart the engine ;-)…
HELP : All logical logs are FULL
Hi All Thanks for your response. I solved the "All logical logs are FULL" . I did the following : ShutdownServer : onmode -ky Change Onconfig : LTAPEDEV in the onconfig to /DEV/NULL Restart Server : oninit After RECOVERY : onmode -ky Change Onconfig : LTAPEDEV change…
Re: Performance tuning suggestions needed
On 1 Oct 2006 20:10:51 -0700, calyanram@hotmail.com wrote: >this my onconfig file. > ...onconfig file snipped... Please give us a bit more information. Hardware specs (number of CPUs, memory, OS. etc.) would be good . . . JWC…
SHMADD and EXTSHMADD
Hi, What is the difference between SHMADD and EXTSHMADD? We know the meaning of the SHMADD onconfig parameter. Thanks, Khaled Bentebal ConsultiX Email: khaled.bentebal@consult-ix.fr…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
DBSPACETEMP
Hello All, Just a quick question for you to ponder. Is it possible to include random dbscpaces in the DBSPACETEMP parameter with the onconfig file to prevent space problems in the temp dbspace when creating indexes etc. on very large tables?…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Re: ONCONFIG and AIX
Hi, I would enable KAIO, too. Apart from KAIO the B-Tree Scanner usually benefits from some configuration: >From my experience increasing threshold (default: 500) reduces I/O significantly, enabling range scans (rangesize=500), too. BTSCANNER num=1,prio=low,threshold=50…
RE: ONCONFIG and AIX
> -----Original Message----- > From: informix-list-bounces@iiug.org [mailto:informix-list- > bounces@iiug.org] On Behalf Of tomcaml@yahoo.com > Sent: Thursday, July 27, 2006 12:57 PM > To: informix-list@iiug.org > Subject: ONCONFIG and AIX > > Hello All, > > I am looking for feed…
ONCONFIG and AIX
Hello All, I am looking for feedback, comments, etc. We are currently on IDS 10.FC4 on HP-UX 11 - migrating to IDS 10.FC5 on AIX on an LPAR partition on the i595 I have gotten this message in the log while performing some loads/alter tables/indexes, etc in development phase.…
Parametro TXTIMEOUT
Hola, quisiera saber si alguno de ustedes me puede informar que quiere decir el parametro del onconfig TXTIMEOUT 0x12c, a cuantos segundos se refiere. Gracias de antemano. Salu2...…
not write Log
Can I control the writing Logical LOG? I mean I have a large job and it will use up all my Logoical logs, so I would like to avoid writing log temporarilly for this job. Thanks, Quman…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
logical log size
Hello, The logical logs on my system are configured as 30 32MB logs. The system has been growing rapidly and currently cuts 2-3 logs every 5 minutes. Backup is to a spectralogic tape unit, which is fairly slow to spin up. In order to not run out of logs due to backup issues, I w…
Not using the 100% logical log page size alloacted to informix
No, i meant the logical log page file that i have appended in my query.…
Need help with temporary tables
[This followup was posted to comp.databases.informix] At the office we do a lot of informix work using the program "dbaccess". I know that with dbaccess using the "info" command you can get a lot of information on a table. It seems that the "info" command does not work on tempor…
Re: Error Deleting Temp tables.
prateek jain said: > Hello friends, > Currently within the application temp tables are created > for processing the records by calling function a function > to create temporary tables. after which i call a drop table > function to drop the temporary table. > > Th…
Error Deleting Temp tables.
Hello friends, Currently within the application temp tables are created for processing the records by calling function a function to create temporary tables. after which i call a drop table function to drop the temporary table. The syntax is usual . Create tem…
Can't INSERT blob into specific blob space using JDBC
I tried an example with 3.00.JC3 and it works fine without having a default SBSPACENAME in the onconfig file. VG.…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
return code 164 during logical log backup
Hi all, I have following kind of problem with logical logs backup: When the current logical log is comming full, it does'nt make logical log backup and in online log of informix following message appear: -------------------------------------------------- 16:13:14 Logical Log 524…
Re: Splitting rows without temp tables
"I'm interested in this concept of read-only access not allowing temporary tables. You can even build temporary tables on an HDR secondary, the ultimate read-only database." Just testing.... ;-p…
Re: Validating the 'SBSPACENAME' sblobspace
"Is a command-line call significantly different from file system access?" Well for SQL yes. In sysmaster.sysconfig there is a cf_effective column. This is the value in use by the database server NOW, this does not have to match the ONCONFIG value. You can change the onconfig …
How to View Data of Temporary Table
Hello Friends I have got a .4ge Program in which some temporary tables are created and populated with some records. Now i have to view data of temporary table. One option is i unload to file_name select * from temp_table but since i cannot rebuild the .4ge due to so…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
RE: creating global temporary tables
-----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Rishi Sent: 31 October 2005 09:25 AM To: informix-list@iiug.org Subject: creating global temporary tables >Can you please advice on how to create global temporary tab…
creating global temporary tables
Can you please advice on how to create global temporary tables in informix 9.1, so that it can be accessed across procedures?…
v 9 stopping
search for a dir called informix (assume you installed it there) in there you should have a subdir called etc in there you should find a file called onconfig.<informixserver> search for MSGPATH which has the name of your logfile Superboer.…
Dynamic Logical Logs
I need to get a clarification on the Dynamic Logical LOgs in IDS 9.4. We having few sites running in IDS 9.4 FC6 on IBM pSeries AIX 5.3 Below are the parameter values which have been set :- # Logical Log Configurationd LOGFILES 6 # Number of logical log files LOGSIZE 2000 # Lo…
ROWID functionality
rowid is not unique for fragmented tables. but then maybe the logical log record will include the fragment id for fragmented tables?…
Statistics for temporary tables
Hi, When i update statistics from temporary tabels, where are they stored. Is there any systable like sysdistrib for normal tables which holds this statistics. Bye.…
Redirected restore failure
>From the backup and restore manual renaming chunks duing a restore..key considerations... "During a cold restore, ontape performs the following validations to rename chunks: 3. If renaming the primary root or mirror root chunk, it updates the ONCONFIG file parameters ROOTPATH…
hyperthreading and onconfig parameters
We are upgrading our database servers to HP ProLiant DL380 G4 two-way systems. This platform supports enabling or disabling "hyperthreading". (See, for example, http://sysadminforum.com/t36970.html.) With hyperthreading enabled, the OS (Solaris 9, x86) sees 2 logical processors …
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
RE: recording ONCONFIG changes
Tripwire or AIDE would do the trick too. -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Jonathan Leffler Sent: Thursday, July 07, 2005 2:16 AM To: informix-list@iiug.org Subject: Re: recording ONCONFIG changes mw…
Re: recording ONCONFIG changes
mweallans@panacea.co.uk wrote: > Scanning the old messages I came across a "suspicion" from Neil Truby > that IDS 9.2 was't recording all changes to ONCONFIG in the message > log. > I've recently spent many days trying to find why a problem had recurred > and eventually I discove…
recording ONCONFIG changes
Scanning the old messages I came across a "suspicion" from Neil Truby that IDS 9.2 was't recording all changes to ONCONFIG in the message log. I've recently spent many days trying to find why a problem had recurred and eventually I discovered that it was because a previous change…
Re: ONCONFIG - comments
Juan Pablo wrote: My comments below: > Hi: > Let me begin by saying thanks to all of the frequent posters to this group. > I wanted to offer my config for comments. > thanks > ============================================================ > Hola: > Muchas gracias por el tiem…
Re: ONCONFIG - comments
"Juan Pablo" <in4mixperu@hotmail.com> wrote in message news:1120173312.07d6de6c2486de67e3cad47cd40e6341@teranews... > > Hi: > Let me begin by saying thanks to all of the frequent posters to this > group. > I wanted to offer my config for comments. > thanks > ====================…
Re: ONCONFIG - comments
Juan Pablo said: > > Hi: > Let me begin by saying thanks to all of the frequent posters to this > group. > I wanted to offer my config for comments. > thanks > ============================================================ > Hola: > Muchas gracias por el tiempo y su ayuda. Est…
ONCONFIG - comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para pode…
ONCONFIG - comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
Tracking down temporary tables in IDS 9.4
Is there any way to get more information about a temporary table from outside the creating session? I can see that a temporary table exists, and where it's stored, by running this against sysmaster: select a.tabname, l2date(b.ti_created), hex(partnum), ti_rowsize, ti_nrows from …
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
ONCONFIG comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para pod…
ONCONFIG comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG par…
RE: Logical Logs's
begnadigen Sie mich, Ich verstehe nicht -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Bono Vox Sent: 04 May 2005 11:02 PM To: ids@iiug.org Cc: iiug-esp@iiug.org; informix-list@iiug.org Subject: Logical Logs's Co…
Logical Logs's
Consulta: Cuando ejecuto el comando: $onstat -m y tengo la siguiente salida: 15:50:55 Logical Log 27225 Complete. 15:51:32 Logical Log 27222 - Backup Completed 15:51:32 Logical Log 27223 - Backup Started 15:51:36 Logical Log 27223 - Backup Completed 15:52:00 Logical Log 27225 - …
Logical Logs's
Consulta: Cuando ejecuto el comando: $onstat -m y tengo la siguiente salida: 15:50:55 Logical Log 27225 Complete. 15:51:32 Logical Log 27222 - Backup Completed 15:51:32 Logical Log 27223 - Backup Started 15:51:36 Logical Log 27223 - Backup Completed 15:52:00 Logical Log…
RE: DBTEMP
For temporary files ids will use: PSORT_DBTEMP if not defined he will check DBSPACETEMP environment var, if not defined will check DBSPACETEMP in the ONCONFIG, if not defined will use /tmp. used for the following operations: ORDER BY/GROUP BY UNIQUE/DISTINCT, SORT-MERGE-Join, …
RE: New installation
Yes I agree with Brian, you put something in the onconfig that required 161MB but you have defined the root dbs size 60MB that is not enought to cover all the requests. Check the PHYSFILE, LOGFILES LOGSIZE in the ONCONFIG file. If you need more help give us the full ONCONFIG. b…
Help with ONCONFIG needed
Having a problem with a client connection to an informix database. The server has two databases, db1 and db2. Each database has a separate ONCONFIG file which lists the different db names in them. ONCONFIG_db1 includes db1,but not db2 in the DBSERVERNAME/DBSERVERALIAS …
index on temporary table
We are using indexes on temporary tables, in programs written in Informix 4gl. After migration from Informix SE 7.31 to Informix IDS 9.40HC6, we notice ( by set explain ) that the temp tables are readed in sequential mode, instead of using index ; So the same program spent 20 mn …
Re: PANIC: Attempting to bring system down
looking at their log file that happened before logical recovery completed! looks like they had another problem before they got this one otherwise they wouldn't have had to perform logical recovery…
PANIC: Attempting to bring system down
looking at their log file that happened before logical recovery completed! looks like they had another problem before they got this one otherwise they wouldn't have had to perform logical recovery…
RE: explicit TEMP table in rootdbs?
Temporary Tables ============= Temporary tables are always untyped tables. The following CREATE TABLE statement creates a temporary table: CREATE TEMP TABLE transient (col1 integer, col2 char(20)) After a temporary table is created, you can build indexes on the table. Howe…
RE: explicit TEMP table in rootdbs?
Temporary Tables ============= Temporary tables are always untyped tables. The following CREATE TABLE statement creates a temporary table: CREATE TEMP TABLE transient (col1 integer, col2 char(20)) After a temporary table is created, you can build indexes on the table. Howe…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
The onconfig FILLFACTOR
My day for asking questions ... but that is how one gains knowledge :) The lead DBA for the company for which I am now working for as a consultant wants to establish an initial FILLFACTOR of 100 for those indices that represent a serial column. Since none of the tables having a…
Re: index size for temporary tables
Amol said: > Can anyone tell me how the index size can be calculated for temporary > tables in informix? Same way as any other table? -- Bye now, Obnoxio "C'est pas parce qu'on n'a rien � dire qu'il faut fermer sa gueule" - Coluche "I'm trying to see things your way, but I…
index size for temporary tables
Can anyone tell me how the index size can be calculated for temporary tables in informix? regards, Amol…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
RE: Logical Logs not full
Brice, What you have described is not quite accurate; The logical log is not backed up the instant the transaction is committed when in unbuffered mode, it is written directly to the logical log as opposed to being stored in the current logical log buffer. Buffered logging us…
RE: Logical Logs not full
Muthana, The logical logs are fine, I wouldn't be dropping and recreating them, there is only one reason I can think of as to why a logical log would not reach 100% and that is onmode -l (force next logical log) this may be for any number of reasons, but typically it would be a…
Logical Logs not full
This is a multi-part message in MIME format. ------_=_NextPart_001_01C50831.81451638 Content-Type: multipart/alternative; boundary="----_=_NextPart_002_01C50831.81451638" ------_=_NextPart_002_01C50831.81451638 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-E…
Help !! - Logical Logs are full
IDS 9.21 UC4 LINUX RH 7.1 There was a long transaction aborted, an the IDS stuck in an eternal CKPT. The online.log said : "09:51:44 Waiting for Next Logical Log File to be Freed 09:51:44 Process exited with return code 127: /bin/sh /bin/sh -c /home/informix /etc/log_full.sh 3 …
temporary tables-update statistics
Hi All, A few weeks ago we have migrated from IDS 7.31 to 9.30. Generally, the performance is much better but a couple of options in our application work dramatically slower. We extracted sql code from sqexplain.out files (we haven't access to 4GL programs source code) and saw th…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
Ontape/logical logs
Hi all, I'm reasonably new when it comes to Informix, so I hope this isn't an often- asked question. I've set up a disaster recovery server for our main Informix server, to which I automatically send my level 0/level 1 backups and logical logs, as they're written to disk. I've p…
Re: Stripe and Mirror Everything?
"Claus Samuelsen" <csa@eye-bee-em.com> wrote in message news:41494202$0$212$14726298@news.sunsite.dk... > > I would certainly consider two dbspaces - the root dbspace and a > temporary dbspace. In a logged database transaction record writing > (which is typically the most io inte…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
RE: parametros ONCONFIG
Los parametros del ONCONFIG que tienes que setear para inicializar tu instancia como MINIMO son: ROOTPATH Path completo del chunk creado para almacenar el root Dbspace ROOTSIZE Tama�o del chunk en Kbytes (Ejemplo: 2048000 # 2Gb) DBSERVERNAME Nombre l�gico del server.(Eje…
ontape -c stop archiving logical log on 9.21UC7
Dear All, I'm using 9.21UC7 on AIX4.3.3ML11, normally "ontape -c" archives logical log when the log is full(the logical log status changes from U---- to U-B---), but sometimes, it stops archiving logical log, even if you use "control+c" to stop it and restart it, it still cann't …
parametros ONCONFIG
Me podrian ayudar con los parametros del ONCONFIG. No las tengo muy clara cada parametro, por lo que la misma me trae problemas para el momento que quiero OPTIMIZAR el servidor de bases de datos. Si alguien me puede ayudar a conocer mejor cada uno de estos parametros .... les agr…
RE: DBSPACETEMP Variable [3248]
David Linthwaite wrote: > > Keith > > The following is an extract from the administrators reference manual: > > ".....The list of dbspaces can contain standard dbspaces, temporary > dbspaces, or > both. Use a colon or comma to separate the dbspaces in your list. If > both > stan…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
onconfig for analisis
Hi, I post the onconfig file for its analisis: Operating System: SuSE 9.0 RAM: 1024 Mb Informix version: 9.40 UC2 All chunks are raw devices. Thanks. #************************************************************************** # # INFORMIX SOFTWARE, INC. # # Title: onconfig…
ONCONFIG for 9.40 offered for comment
9.40 FC3W2 on HP-UX 11.11 The server has 6 cpus and 6G of RAM. 3 other, small, IDS 9.40 instances run on the server, and one small 7.31. kaio is enabled. Just put 9.40 live, and it's running about 5-10% more slowly on some key processes. This reflects what happened in testing. …
Re: OnConfig parameters tuning
Laverio wrote: > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ > 2Gb ram and 4 processors that seems very slow on a large sequential > write (I suppose that the problem resides in the dbspaces on > filesystem...). Any suggestion? The following is my standard…
Re: OnConfig parameters tuning
"Laverio" <laverioNO@z-1000.net> wrote in message news:cac7sg$e8v$1@newsreader.mailgate.org... > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram > and 4 processors that seems very slow on a large sequential write (I suppose > that the problem resides in…
Re: OnConfig parameters tuning
Laverio wrote: > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram > and 4 processors that seems very slow on a large sequential write (I suppose > that the problem resides in the dbspaces on filesystem...). Any suggestion? > > My onconfig it's set as fol…
OnConfig parameters tuning
Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram and 4 processors that seems very slow on a large sequential write (I suppose that the problem resides in the dbspaces on filesystem...). Any suggestion? My onconfig it's set as follow: # System Configura…
RE: Logical logs - how to tell if full?
Notbeen on anysystem admin courses whatsoever - and unlikely to.. Is it safe to back up the logical logs at anytime?…
onbar error message
Hello! I have an Informix backup configured as an onbar + Legato Networker combination with IDS 9.40 UC3 on Solaris 9 machine. We take dbspace backups every night and continously backup logical logs using log_full.sh script. All works well except one thing: if logical logs start …
logical log record failed
Hello all, IDS 9.21 UC4 Solaris 8 We have two systems replicating through HDR. the secondary server which is receiving the logs from the primary server suddenly starting giving this error message " rollforward of log record failed" then it gives the logical log number and the p…
Howto for Onconfig
Hi everyone, This is probably a question which has been asked often. But I could not find proper documentation on how to calculate and set correct parameters for Onconfig. I understand this is a complex question. But are there any articles on this ? Maybe they covered the topic …
onbar backup logical logs
Hi All, I am using onbar to backup my informix 7.31 databases with Legato networker. I dont want to backup my logical logs. Before using onbar, with ontape, I backed up my logical logs to /dev/null. How can I do that with onbar and Legato networker. Thanks for any help ______…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
AIX logical logging question
My sysadmin wants to know if I can send the logical logs to a rewriteable DVD drive? Seems like new AIX boxes are coming equipped with these devices instead of 8mm tape drives. Anybody doing this currently? -- Phillip…
Physical and logical log placement
It's often recommended that the physical and logical logs be moved from rootdbs. Apart from performance, is there some reason I've missed why they should be kept separate? And does it make any difference if the whole instance is going in a RAID 1+0 array? Andy Kent…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
logical logs in 9.40.FC3
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C3FA52.A6808A50 Content-Type: text/plain I just went into production this weekend on release 9.40.FC3, AIX 5.2. On my…
onbar script for logical logs
Anyone have a script to perform continuous logging using onbar to filesystems? I would like to write to a separate file on disk daily. Thanks for any help in advance.…
SHARED MEMORY LIMIT
Is posible to use with informix of 32 bits more than 2GB of shared memory in a Linux Machine? The base address in onconfig is: SHMBASE 0x41000000 Thanks in advance,…
FW: Whatcha' wanta have?????
Mark Denham wrote: > Be able to add the definition of a temp table to the system catalogs so > that it's not necessary to define the table in the application. I would > like it to be possible to set it 'not logged'. The table should > automatically be created when it is referred…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
Calculate Logical Log Required
I have read DB Adm reference and some other Informix manuals and cannot find how to calculate the required logical log need for following cases. Can anyone tell me? Just some example :- 1. Say I need to load 1,000,000 rows with record size 100 bytes to DB. How many logical l…
Re: Temporary table
On Fri, 16 Jan 2004 15:44:21 -0500, Curtis Crowson wrote: > roeferr@ig.com.br (Ferronato) wrote in message > news:<df1bdeb4.0312240634.7b2ae02e@posting.google.com>... <SNIP> >> > How can I define if defined temp table exists in the current session? > > OK while we are on the sub…
Write Logical Logs To Disk
Hi, Greetings, The situation: I am trying to write the logical logs on the first instance to the disk instead of the tape so that I may transfer these to the second instance and use recovery to bring it upto date. I am trying this to implement production backup at the database…
Re: Temporary table
roeferr@ig.com.br (Ferronato) wrote in message news:<df1bdeb4.0312240634.7b2ae02e@posting.google.com>... > TRY IT: > > In a database: > ----------------------- spa@dsa2 --------------- Press CTRL-W for Help > -------- > create temp table rfo (a int) with no log ; > insert into r…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
REgarding the Error in Logical Logs
Hi, We are running Informix 9.3 on Sun OS 5.8 . I cannot get my database engine up because of following error : 12:36:39 Results: Log record (OLDRSAM:HDELETE) in log 95507, offset 0xdf352c was not rolled back 12:36:39 Action: Use 'onlog' to view the transaction and repair manua…
Re: Temporary table
TRY IT: In a database: ----------------------- spa@dsa2 --------------- Press CTRL-W for Help -------- create temp table rfo (a int) with no log ; insert into rfo values (100) ; NOW, IN OTHER SESSION, IN THE SAME DATABASE OR IN OTHER DATABASE IF IN THE SAME INSTANCE : --------…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Logical log backup on XPS
Hi All, We have XPS 8.40 installed on HP UX 11i. Ther server was initialised and we were trying to load data into a table . Now the server is in Blocked state and the online.log file mentions that we need to take logical log back. Pls let us know the process for taking logical …
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
Re: Very slow archives - the Very Old Page bug perhaps?
> Queries involving temporary tables (specially in your version) and other queries that force the engine to create temporary space (that use IN for example). So basically queries that update something - even if that something is only a temporary resource ... ? > Ouch... 7.31.UC…
Re: Examine data in temporary tables
Have a look at temptab.pl or temptab.4gl in the IIUG archive. The perl version is much newer, I haven't had access to 4GL for a long time to do anything with the other. cheers RET On 10/12/2003, at 1:28 AM, Ph. Chantry wrote: > Good morning/evening, > > IDS 7.30 or 9.40. > > …
Re: Examine data in temporary tables
On Tue, 09 Dec 2003 09:28:00 -0500, Ph. Chantry wrote: Of a session other than the session that created the temp tables? No. Art S. Kagel > Good morning/evening, > > IDS 7.30 or 9.40. > > The command "onstat -g sql <sessid>" indicates the list of "User-created Temp > tables",…
Re: Temporary table
Sauron wrote: > Hi, All! > > :(( > I repeat my question by example: > > ------------------ > create procedure _p1() > > create temp table _t1 (a int); > > insert into _t1 values(1); > > end procedure; > ......... > ......... > ......... > create procedure _p2() > > if not …
Examine data in temporary tables
Good morning/evening, IDS 7.30 or 9.40. The command "onstat -g sql <sessid>" indicates the list of "User-created Temp tables", with their partnum, tabname and rowsize. Is it a way to select, from the IDS Server, the data stored into the temp tables of one user session ? Thank…
Temporary table
Hi! How can I define if defined temp table exists in the current session? -- Sauron…
Changing database local / dbexport tapesize
Hi, Did you change TAPESIZE on your onconfig file? That could be the restriction! REGARDS…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Restore certain Logical Logs
Hi guys, restoring a Level-0-archive using ontape -r and after that restoring logical logs using ontape -l works without any problem. Now, I have to restore a database-state, given after certain logical log. Is it possible, to restore a Level-0-archive (which includes the log…
Re: onconfig and sqlhosts
Hi Thomas. Administrator's Guide for Informix Dynamic Server, Version 7.3 http://www-3.ibm.com/software/data/informix/pubs/library/ids_73.html HTH. -- Tsutomu Ogiwara from Tokyo Japan. ICQ#:168106592 >From: Thomas Ronayne <trona@ameritech.net> >Reply-To: Thomas Ronayne <trona…
onconfig and sqlhosts
I've managed to blow away my installed Informix system and cannot for the life of me find the notes I had about onconfig and sqlhosts. It's version 7.30.UC5 running on Slackware 9.0 -- can someone point me at the right document in Answers for the appropriate settings? Thanks.…
Public Tempral Tables
Hal 9000 wrote: > I want to create temporary tables that can be available to all the > connected users, as far as i know, the temprary tables can be seen > only to the session that created it, i need to create "public" > temporary tables. > > Can this be possible? > > Thanks. > >…
Re: Handling temporary tables in Informix
Suket wrote: > My Informix 4gl program has functions, which: > 1) Creates a temp table, loads data into it > 2) Access the temporary table > > Now in 2) , there is a line which resets connection to database by : > DATABASE <database name> > Note that this database name is same as…
Re: Handling temporary tables in Informix
The scope of a temporary table is limited to the life of the session, so do all your processing inside of a transaction to avoid all the hard work of building the temp table. begin work; create temp table tab1; insert into tab1 ..........; select blah from tab1 ; commit work; Ho…
Handling temporary tables in Informix
Hi, My Informix 4gl program has functions, which: 1) Creates a temp table, loads data into it 2) Access the temporary table Now in 2) , there is a line which resets connection to database by : DATABASE <database name> Note that this database name is same as used in 1) Now the …
Re: Onconfig file parameters
Sometimes even the ontape parameters (TAPEDEV, LTAPEDEV, TAPESIZE, etc.) are not dynamic. What you can do is change a parameter in the onconfig file and then dump out the reserve page that holds the onconfig parameters with: oncheck -pP 1 1 Hope this suggestion helps. Brice Av…
logical log recovery problem
Hi All, I'm getting the following error when trying to start up a database: 09:57:10 Results: Log record (OLDRSAM:HINSERT) in log 988, offset 0x3ab0098 was not rolled back 09:57:10 Action: Use 'onlog' to view the transaction and repair manually. 09:57:10 stack trace for pid 228…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Applying Logical Logs for a restore ?
I'm an informix newbie. So my question is very basic. After I have backed up the logical logs how is the process of reapplying them to the database to get it current done ? The logs have been backed up using ontape -a Thanks, Jack…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
Logical log buffer
Version: IDS 7.30 UC7 Question: We have 3 logical log buffers, 32K each. And databases use buffered logical log (>/dev/null), altogether 8 logical logs. One day users complained they can't do anything and when we ran onstat -u, we found out something like this: ..... e940e864 G…
Re: Logical Logs Size
What about the following : onstat -l (LOGBUFF will be shown here) What log mode on the database (Buffered, Unbuffered, None) Version of IDS O/S running on Are temp tables in use?? Do you have temp dbspaces?? Do you use into temp with no log?? Some of the online log that shows lo…
RE: Logical Logs Size
Fred 30 Gb seems rather large for total log space (in fact almost 19 Gb seems large). What is the size of your database? How quickly are you using the logs? What are your Long transaction limits set to? How often do you hit this long transaction? Can you (should you) split these…
Logical Logs Size
Hi, Well, in order to avoid amongother things several Long transactions aborded, I have decided to increase to size of the logical logs. This is what the actual configuration is : Total Logs Size : 18957068 KB Logs Number : 375 35 Logs of 15000 KB 340 Logs of 50000 KB …
Re: restore logical log
Andrey Mischenko wrote: > How to restore logical > log if a parameter LTAPEDEV there was /dev/null on a moment of shaping of a > log If you are asking how to restore logical logs when you have thrown them away using /dev/null, then the answer is; you can't, because they don't ex…
Re: restore logical log
Hello Andrey, If you had been backing up the logical logs to the bit bucket, I'm afraid there's no way you can restore the logs.... The only way is to go to a full Level 0 backup. Thanx much, Rajib Sarkar Advisory Support Engineer (RAS) IBM Data Management Solutions Ph: 602-217-…
restore logical log
How to restore logical log if a parameter LTAPEDEV there was /dev/null on a moment of shaping of a log…
Where are the logical logs?
Hi there, Is there any way to know which dbspace are the logical logs in? Thx.…
RE: HPL Unloading error [1467]
Here's my onconfig file SHMVIRTSIZE 147456 SHMADD 8192 SHMTOTAL 0…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
onconfig file
The system administrator at my current site thought he would be very clever and he linked the onconfig files to different directories using ln -s. We have now discovered that these links are being lost when we use onmonitor and replaced by a local file, but not when we use vi. I…
ISA slow with logical logs
Hai, When requesting the logical log information via ISA this tool is very slow. Does anybody know a solution? Bickel…
Re: Logical-log backup
----- Original Message ----- From: Woi Yew Fong <yfwoi@tpl.com.sg> To: <informix-list@iiug.org> Sent: Tuesday, January 30, 2001 9:40 AM Subject: Logical-log backup > > Hi there, > > I am confused with the automatic logical-log backup (with ontape -a) and > > continues logical-l…
Logical-log backup
> Hi there, > I am confused with the automatic logical-log backup (with ontape -a) and > continues logical-log file backup (with ontape -c). Can somebody clarify > the doubt for me. > > 1. Does automatic logical-log backup mean an operator need to execute the > command ontape -a…
Enterprise Replication log
Enterprise Replication does not have a seperate set of logs. It snoops from the normal logical log file buffers. It only snoops from the log files themselve during recovery or if for some reason it falls behind.…
TEMP table info from systables
Can we retrieve temporary table information from systables or sysmaster..? Thanks and Regards Anas Sent via Deja.com http://www.deja.com/ Before you buy.…
SID of a temporary table
Is there any way to retrieve the ID of the session in which a temporary table was created?…
SID of a temporary table
Is there any way to retrieve the ID of the session in which a temporary table was created?…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
IDS 7.31.Txx Windows NT Alaramprogram
i have change the path in the onconfig-file and restart the server but the alarmprogram will not be start if a event (logs) a generated! thomas…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Drop the last transaction from logical log
Does any body know how to drop the last transaction from logical log before startup the database instance?…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
Re: ONCONFIG History
put it under source code control? SCCS and RCS are free tools and dont take too much resources. HTH Sujit testNews <mtabunda@amellar.com> on 10/04/2000 09:05:30 PM Please respond to testNews <mtabunda@amellar.com> To: informix-list@iiug.org cc: Subject: ONCONFIG History I…
RE: ONCONFIG History
Look at your online message log onstat -c |grep MSG -----Original Message----- From: testNews [mailto:mtabunda@amellar.com] Sent: Wednesday, October 04, 2000 9:06 PM To: informix-list@iiug.org Subject: ONCONFIG History Is there a way to know/track the changes made to ONCONFIG …
RE: ONCONFIG History
Changes are recorded in the message log at startup. Wayne E. Martin Informix Database Administrator Kmart Corp. -----Original Message----- From: testNews [mailto:mtabunda@amellar.com] Sent: Thursday, October 05, 2000 12:06 AM To: informix-list@iiug.org Subject: ONCONFIG History…
ONCONFIG History
Is there a way to know/track the changes made to ONCONFIG files?…
Logical Log Files are Full
Is there any way to flush out the contents of the LOgical Log Files through a script or command without manually setting it ? Thanks, Gavin…
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
temp tables
hi, how can i determine all existing temporary tables in an informix instance? thanks ottmar goedecke hdi informationsverarbeitung datanbankadministration podbielskistr. 396 30659 hannover tel 0511/645-4451, fax 0511/645-114451 e-mail: goedecke@hdi.de…
TBLSPACE_STATS
Hi, what is the meaning of TBLSPACE_STATS variable in onconfig file? thank in advance.…
logical logs
Hi all, How to find out which session causing the logical logs to fill up. Regards Aboo…
Query Optimization: Wrong execution plan?
Xavi Tarafa Mercader wrote: > Any suggestion about how to improve the query performance? Set OPTCOMPIND parameter ( in onconfig file ) to 0. > Xavi. Leonid.…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
WSTATS and Performance
Hi, does anybody know the performance degradation by setting WSTATS 1 in the onconfig file? Is this 1%, 5% or 10% ??? TIA Ruediger Papke…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Re: Logical logs?
Logical logs reside on disks. Logical log buffers reside in memory. If you want to increase the size and number of Logical logs then just add more disk space. Don "Josep M. Marti" wrote: > > Hi all, > I have a problem with the logical log. I need to add more logical logs > be…
Logical logs?
Hi all, I have a problem with the logical log. I need to add more logical logs becouse I can't run any proces, but the logical logs need memory space or disk space? If I put a lot of logical logs I needed add memory or disk? thanks all, -- ------------------------------------…
Questions about sysprofile in sysmaster?
In Informix << Adminstrator reference>> book, It tells me that the table sysprofile in sysmaster contains columns such as llgrecs,llgpagewrites,llgwrites and it wrote: llgrecs: Logical-log records llgpagewrites: Logical-log writes llgwrites: Logical-log page writes 1.What doe…
Logical logs
Hi All, I have a informix database of 7.30 where in the logical log is getting full very frequently. > What might be the reason. I think the "size" / "physize" of each log is > very less. I am giving below the output of "onstat -l". Is there any > parameters in onconfig tha…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Logical logs
In our system, I am noticing Long Transactions being caused sometimes. We have 80 log files, each of size 2048. LTXHWM & LTXEHWM are 50 & 60. I don't want to increase them. I am planning to increase the no. of log files to 120 or to 160. Are there any pros and cons of having more…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
Detecting the existence of a temporary table
Hello everybody I�m running an application which uses temporary tables. We�re using an IIS to access the database, so there are times that the same connection is used to access the data, and sometimes the temporary tables are already created. In this case, we have to drop them ot…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
Re: Memory problems? Please help.
>>What is the connection type? shm or soc ? >> >What are these? See NETTYPE in your onconfig file. HTH Michael…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
question
Try backing up the logical logs with ontape. Nona…
Temp Tables and ROWIDS
I had a problem with a temporary table ( probably not related.... ) as well. Basically it involved rows being deleted from the temp table but the table index wasn't being updated. To solve it I was asked to take WITH NO LOG out of the table creation. If you use that option perhap…
How to make a temp table public?
Hi Everybody, How can i make a temp table public? I have an Application which creates a temporary table and then calls another Application to work with these data too. But the other Application doesn't find the temp table. I don't need these data after them, so i won't write th…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Help Please - Bug 78956
Case : RE: 911-593 , Scottish Legal Life The table is temporary and therefore is created via SELECT ....WITH NO LOG.…
Role of DBSPACETEMP
Henk van der Geld wrote: > > Hi, > > We have some questions about of the role and the effect of the envvar > DBSPACETEMP. Sometimes I read that in databases that are logged, > temporary tables are logged by default and WILL NOT BE CREATED IN > 'DBSPACETEMP'. In that case it is ne…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
Re: ROWIDs and fragmented temporary tables
"Henderson, Scott" wrote: > > Is there a quick fix? No. > Yep. We have started changing the code that use rowid's on temporary tables. > Your problem has nothing to do with temp dbspaces. I don't agree. In this case the problem is indeed in using more than one temporary dbspac…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Re: ROWIDs and fragmented temporary tables
<com@netinfo-moldova.com> wrote in message news:80ogam$kaj$1@nnrp1.deja.com... You must create your tables as CREATE TABLE ... WITH ROWIDS. By default fragmented tables don't have rowid column. ------------------------------------------------- With best regards, Yuri Dovgart SA…
ROWIDs and fragmented temporary tables
Hello, I have a question regarding ROWIDs on fragmented temporary tables. I've just installed and configured an Informix server (7.30) and I configured it to use three temporary dbspace. I've got a surprise discovering that some of applications use rowid columns on temporary tab…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Re: Dumb question
Sorry all, I think I found the answer to my own dumb question in the documentation (last place I would have thought to look). "The database server uses the ONCONFIG file during initialization" >Is it safe to edit my onconfig file when the database is live ? > >Or should I stop…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
SQL performance problem
You could try the second select into a temporary table to hold only rows that match your > WHERE table3_unique_key = 434343) Have you ran UPDATE STATISTICS lately ?…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
ontape -c
When using 'ontape -c', for continuos backup of logical logs, what is the proper way to terminate the command? Is it simply a CTRL-C?…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
HELP!!!
im looking at every logical log at 100% and naturally a blocked checkpoint. whats the best, and next best thing to do in a case like this!!!…
Lock Table Overflow - onconfig
We get an error in the Informix log-file. Lock table overflow. What do we have to change in the onconfig-file ? Kind Regards, Franky Thiel franky.thiel@Infohos.be…
Help Needed: Like operator
I don't think there is an direct alternative, as the documentation says: "You also cannot use TEXT items in the following ways: * With aggregate functions * With the IN clause * With the MATCHES or LIKE clauses * With the GROUP BY clause * With the ORDER BY clause Maybe you co…
Setting up shared memory connection
Did you add the DBSERVERALIASES line in the onconfig file? -- James Edmiston Quest Information Systems, Inc. www.questisinc.com…
Temporary storage tables.
Hi All, In our application, we have a need to store a table data temporarily in a temporary table, and regularly at night we need to update the actual table from temporary table. If the table name is employee, we need to take some data from employee tabl…
Re: Temp Tables
From: anandpa@my-deja.com > > In our application, we have a need to store >a table data temporarily in a temporary table, and >regularly at night we need to update the actual table >from temporary table. Just be aware that a temp table will be dropped if the session dies. I th…
Temp Tables
Hi All, In our application, we have a need to store a table data temporarily in a temporary table, and regularly at night we need to update the actual table from temporary table. If the table name is employee, we need to take some data from employee table in morning, put it in…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
Re: ontape in HP-UX
You need verify the sintax of onconfig file for this entries: TAPEDEV /dev/rmt/0m # Tape device path TAPEBLK 512 # Tape block size (Kbytes) TAPESIZE 7800000 # Maximum amount of data to put on tape (Kbytes) (This is my onconfig fil…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
logicallogs
Hi there In the IECC database list my databases have the status LOGGING MODE - no. But the logical logs (onstat -l) are in use. Why ??? Thanks…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
Accessing Temp Tables
Hi Folks, Is there any way to access the temporary table from another session which is not the owner of that table. I know this is an ancient question but you may have some magic tricks to make it happen. Thanks ! Gursoy YERLI…
Logical logs
Hi Everyone , I am new to the administrative side of Informix Dynamic OL Server and would be gratefull if someone is able to give me a clear answer pertaining to increasing the size of my logical log file. I have tried adjusting the parameters in my confiuration files that did…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
Log Files Full
Error message: Logical Log Files are Full -- Backup is Needed Can anyone help me? Thanks in advance, Joao…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Re: Informix 7.3 UC5 on RH Linux 5.2
Additional INFO: Please see attached "sqlhosts" and ONCONFIG files...…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Re: dbspaces for Temporary tables
Jay Walters wrote: > > I am running IDS 7.3 on NT sp 3 24x7 web OLTP environment. Do people > use onspace -t type dbspaces in this environment (no mirroring?), > regular dbspaces, or filesystem (no mirroring on NT Wks) for their temp > tables. I don't have a lot of disk spindle…
dbspaces for Temporary tables
I am running IDS 7.3 on NT sp 3 24x7 web OLTP environment. Do people use onspace -t type dbspaces in this environment (no mirroring?), regular dbspaces, or filesystem (no mirroring on NT Wks) for their temp tables. I don't have a lot of disk spindles to play with either unfortu…
Re: onconfig parameters
> onstat -c shows you the contents of the ONCONFIG file, but then so does vi > $INFORMIXDIR/etc/$ONCONFIG. Perhaps I did not understand the question? Does onstat -c reflect changes made by onmode commands? I should try that and see...that, to me, would be the compelling reason …
Re: onconfig parameters
Thomas onstat -c shows you the contents of the ONCONFIG file, but then so does vi $INFORMIXDIR/etc/$ONCONFIG. Perhaps I did not understand the question? HTH Sujit "Thomas G. Smith" <tsmith@wdn.com> on 04/28/99 12:19:10 PM Please respond to "Thomas G. Smith" <tsmith@wdn.com> …
onconfig parameters
Is there a command to force the engine to show me what all the onconfig parameters (and other perhaps unknown parameters) have been set to?…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Re: Informix 7.24 Temp Tables Not Dropping
jeffm@lysander.co.uk wrote: > > In article <7d74rd$hrt$2@news-1.news.gte.net>, > June Tong <june_t@hotmail.com> wrote: > > jeffm@lysander.co.uk wrote: > > > > > I have a system running IDS 7.24 on HP-UX 10.20. Some software is creating > > > temporary tables using 'SELECT...IN…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Informix 7.24 Temp Tables Not Dropping
In article <7d74rd$hrt$2@news-1.news.gte.net>, June Tong <june_t@hotmail.com> wrote: > jeffm@lysander.co.uk wrote: > > > I have a system running IDS 7.24 on HP-UX 10.20. Some software is creating > > temporary tables using 'SELECT...INTO TEMP' and these are going into the > > r…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
onconfig tuning
Hi all! I have posted to the web my collection of notes on onconfig parameters. It is not yet complete but pretty far along. http://home.earthlink.net/~mildness/bamph/informix.htm It has helped me over the years to have this list in my PDA. If you think it useful feel free…
Logical Log
This is a multi-part message in MIME format. ------=_NextPart_000_0084_01BE5CC0.3EFB85E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear User, I have been trying to get a large file loaded on a database with = transaction loggin…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Re: Indexing a Temporary Table...
We treat temp tables just like real ones. Create it, load it, index it. Then update stats including building distributions. This seems to work the best. If you fill and then index a temp table (or real one) the engine knows about the index, but doesn't it think the table is st…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Tables in dbspacetemp
onstat -g sql <session-id> shows temporary tables / session. If you want to get all of the temporary tables, you have to execute pervious command for all of current sessions. Informix doesn't write any info about temporary files to the system tables. Best regards, Olli cmuel…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Regarding calling an INFORMIX procedure from a UNIX shell script
I use dbaccess for this purpose. Syntax is "dbaccess <database> <text file with sql commands>. Just be sure your informix environment variables are set properly (INFORMIXSERVER, ONCONFIG).…
Indexing a Temporary Table...
Does anyone have any insight to indexing a explicit temporary table created with a SELECT ... INTO TEMP ... clause. I create one with no errors, but the EXPLAIN plan tells me that the optimizer is doing a SEQUENTIAL SCAN instead of using the INDEX PATH. Thanks! Bryan Hughes He…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
temporary tables and informix hang
Our users recently reported that their informix system (7.?) was having problems. A transaction had hung. They reported messages to the effect that /tmp was full. This was where they were creating temp tables. /tmp itself still appeared to be 40 % free. They reckoned that an onst…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Roll Forward Logical Log
Hi, Just wondering if I create my temp table 'with no log' option in my stored procedure. Do I have a problem rolling forward my logical log as the temp table will not be logged ?? Thanks JH…
Logical Logs
Hello, just two simple questions: What is a logical log ? Are the logical logs stored on tape automatically with the "ontape -s" command? Best regards Andre…
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Re: IECC Server Discovery Failed 2nd
Hi Dale, sorry for not reading your article correctly: Are both agents running admagent and osagent ? If so, when you run stopsa, do both stop? If not, kill them and run startsa again. Is your onconfig still up to date? The agents seem to take all information from onconfig ra…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Updating databases
What must be done,eg onconfig, to get the fastest result on updating a database alter tables, inserts etc.…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
ONCONFIG on UNIX
What kind of use if the parameter "SYSALARMPROGRAM" for. And which input parameters are used. Thanks for mailing to baumschlager@pfeiffer.co.at…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: dropping temp TBLspace
Allen Jantzen wrote: > > Everytime I bounce my 7.22 ODS HP-UX server, a *LOT* of the following > appears in $INFORMIXDIR/online.log on the way back up What commands do you use to 'bounce' the engine? > 13:45:23 Dropping temporary TBLspace 300061, recovering 96 pages. > 13:45:2…
Re: dropping temp TBLspace
In article <35fd15f0.70581570@kiosk>, allenj@ndr.com (Allen Jantzen) wrote: > Everytime I bounce my 7.22 ODS HP-UX server, a *LOT* of the following > appears in $INFORMIXDIR/online.log on the way back up > > 13:45:23 Dropping temporary TBLspace 300061, recovering 96 pages. > 13…
dropping temp TBLspace
Everytime I bounce my 7.22 ODS HP-UX server, a *LOT* of the following appears in $INFORMIXDIR/online.log on the way back up 13:45:23 Dropping temporary TBLspace 300061, recovering 96 pages. 13:45:23 Dropping temporary TBLspace 3000c0, recovering 176 pages. 13:45:23 Dropping t…
Logical Logs
Hello List, I have ten logcal log under IDS 7.30 and when I take backup through ontape -a and when I see the status of logical logs using onstat -l the percentage used does not change however I get a backup flage B additional. But Is it not that the %used should become Zero ? …
logical logs
Hi, The L.Logs on my system after a L.log backup normally shows a status of "U_B_ _ _ _" They are backed up as soon as they are full thro' the ALARMPROGRAM. 1) However suddenly some of the logs show a status of "F _ _ _ _ _ _".Though this might mean the same as "U_B____" , Any id…
sizes in onconfig
OWS 7.2 on SCO UNIX: Does anybody know why all sizes of dbspaces or logs, etc. are just half as big as they are in the onconfig file. If I check the size of a dbspace, for example, its file size is 2 GByte, but oncheck -pe says it's 1 GByte. Thanks in advance, Pascal…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
Re: Doubt regarding L.Log size
Sadagopan, Sathish wrote: > > Hi, > LOGSIZE in the onconfig is shown as 1000 Kb, whereas size in onstat -l shows > > a figure of 5000 , Page size is 2K. > How can that be ? It looks like someone used onparams to add logfiles with sizes different from that stored in the onconfig.…
Doubt regarding L.Log size
Hi, LOGSIZE in the onconfig is shown as 1000 Kb, whereas size in onstat -l shows a figure of 5000 , Page size is 2K. How can that be ? TIA Sathish…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Temporary Space Issue
Willie L. Meeks wrote: > > Greetings all, > > I have a problem related to temporary dbspace usage. It is a known bug in > 7.14 related to temporary spaces not rolling i.e.( When a query attaches to > a temporary space it will not roll to the next temporary space). I know you do…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Re: Temporary dbspaces
In article <3576713C.79705C38@jonners.cix.co.uk>, Jonathan Myatt <jon@jonners.cix.co.uk> wrote: > > A quick question for the gurus... > > If I have four temporary dbspaces defined, will a large sort which > creates a large temporary table use all four, or can the temp table > n…
Re: Anyone been able to launch an insert on a table from an update activated trigger on the same table?
Could you not use a trigger on a temporary table that is activated by the update. Which inturn when triggered sets the insert on the table that you origionally updated. (if you know what I mean) Jamie…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Temporary table and virtual column
Hi All, Take a look at the following statements written into a 4GL program: SELECT field1, field2, "TR" FROM table1 WHERE some_conditions1 UNION SELECT field1, field2, "SH" FROM table1 WHERE some_conditions2 INTO TEMP temp_table This doesn't go down to well with the compiler s…
Logical Logs
Hello, When I do a restore using ontape and then rollforward the L.logs . When finished with the Logical logs, the message into the logfile is "Logical Log nnnn Complete" where nnnn is The first log with which the rollforward started and not the last log which was rolled forward.…
Bad performance with DBSPACETMP enabled
I'm currently using OnLine 7.23 on a HP K460 server. I have one big table (appr. 1 GB) for which we do an "UPDATE STATISTICS HIGH" on a regular basis. When using 3 temporary dbspaces on raw devices, the running time for this task is about 2 hours. If I dont't use temporary dbsp…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
How to size the logical log ?
Hello Guys, Does anybody know how to calculate the size of the logical logs ? What does the logical log size based upon ? What are the factors ? I want to backup the logical logs very often to avoid disaster. How does informix backup logical logs ? …
Re: Duplicate table names in buffered mode.
I think this situation can take place only if tables are temporary, created by SELECT .... INTO TEMP table_name. In such case, Informix really creates separate tables for each session, even with the same name.…
My weird problems
Thanks to all who replied. The Logical Log problem was with memory parameters in the onconfig file. DBSPACETEMP problem still exists however Regards Lee Robertson…
Re: What is the best way to backup logical logs ?
Timothy_Lam@crow.bmc.com wrote: > > Hello, > > What is the best way to backup logical logs to remote machine? > Should I kick it off when the logical log becomes full ? > Does anyone has any examples ? > > > What is the recommend size of logical logs ? Ho…
What is the best way to backup logical logs ?
Hello, What is the best way to backup logical logs to remote machine? Should I kick it off when the logical log becomes full ? Does anyone has any examples ? What is the recommend size of logical logs ? How do you calculate ? Rdgs Timothy…
Re: [Fwd: Correct Answer]
Hi, Below is the excerpt from INFORMIX Dynamic Server Administration: When you create an explicit temporary table using the IN dbspace option of CREATE TEMP TABLE, OnLine stores the temporary table in that dbspace. When you do not use the IN dbspace option of CREATE TEMP TABLE, o…
Onconfig Question
I sent this a few weeks ago and didn't get any responses. I am rephrasing the heading and trying again. We are not currently having any performance problems, but I am interested in hearing some opinions from the experts out here. One of our systems is as follows: Sun SPARCcen…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Prepare a Statement that uses a temporary table?
Is there a way in ESQL/C to prepare a Statement that uses a temporary table (e.g. "Select * from Temp_Table ...") if this temporary table is not already created at prepare time? Thanks for your help, Georg…
Re: [Q] close temporary tables explicitly
SeungLak Choi wrote: > I know temporary tables are closed implicitly when session is closed. > > However, I am using a great number of temporary tables within a > session. > So, I want to close temporary tables which are not needed any more. > > How can I do it? > > Thanks in ad…
[Q] close temporary tables explicitly
I know temporary tables are closed implicitly when session is closed. However, I am using a great number of temporary tables within a session. So, I want to close temporary tables which are not needed any more. How can I do it? Thanks in advance -- Choi, SeungLak Graduate Stu…
Re: Temporary tables
> Is it better to select into a temp table or create a temp table, prepare the > select and then use an insert cursor to populate it? I've seen some responses on this, and I think they all mentioned that it may be just ever-so-slightly faster to select into temp than to create a…
Re: Temporary tables
In article <6b88jh$af3$1@godzilla.zeta.org.au>, Bryan Tonnet <batonnet@zeta.org.au> writes >In <V8ZwzHAtq210EwhU@smooth1.demon.co.uk> David Williams ><djw@smooth1.demon.co.uk> writes: > >> Try but you can then you > >:) > >No more of the red pills until next Tuesday, David. > …
Re: Temporary tables
In <V8ZwzHAtq210EwhU@smooth1.demon.co.uk> David Williams <djw@smooth1.demon.co.uk> writes: > Try but you can then you :) No more of the red pills until next Tuesday, David. -- Bryan Tonnet batonnet@phase4.com.au…
Re: Temporary tables
In article <6b5r8l$o1l$1@godzilla.zeta.org.au>, Bryan Tonnet <batonnet@zeta.org.au> writes >In <6b4kqa$290@news.singlepointsolutions.co.uk> "Paul N. Daly" ><pndaly@globalnet.co.uk> writes: > >>Is it better to select into a temp table or create a temp table, prepare the >>select a…
Re: Temporary tables
In <6b4kqa$290@news.singlepointsolutions.co.uk> "Paul N. Daly" <pndaly@globalnet.co.uk> writes: >Is it better to select into a temp table or create a temp table, prepare the >select and then use an insert cursor to populate it? And the answer is........depends! I asked the sam…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Temporary tables
Is it better to select into a temp table or create a temp table, prepare the select and then use an insert cursor to populate it? Thanks, Paul…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Logical Logs
Hi users, The env i am using is Informix OWS 7.20. The database i am using dosen't have logs. So in my esql/c programs if i user BEGIN WORK it gives me an error. Can anybody tell how to create log for existing database or if i export the database how to import it into …
Logical Logs
Hi users, The env i am using is Informix OWS 7.20. The database i am using dosen't have logs. So in my esql/c programs if i user BEGIN WORK it gives me an error. Can anybody tell how to create log for existing database or if i export the database how to import it into …
Logical Logs
Hi users, The env i am using is Informix OWS 7.20. The database i am using dosen't have logs. So in my esql/c programs if i user BEGIN WORK it gives me an error. Can anybody tell how to create log for existing database or if i export the database how to import it into …
logical logs
Hi I am running Online 7.23 on HP 10.20 Why was logical log backed up every 2-3 minutes? Is there any hint not to make that backup too fast? Here is the info... 11:07:08 Logical Log 608 Complete. 11:07:09 Process exited with return code 133: /bin/sh /bin/sh -c /usr/informix/…
Temporary Tables and SYSPTPROF. Questions
Hi everybody, Something about the temporary ( dbspace ) ( tables ) always fasinates me. I have more questions. I was monitoring the progress of a temporary table created by a process, and here's what I found. 1. If the process creates a temporary table with logging, ( say…
Re: Freeing Logical Log with Status U
What's LOGFILES set to in your onconfig file? Try forcing a checkpoint? Jon.…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
RE: Logical Logs on OWS 7.20 UC2
Hi Ramp! Even in a non-transactional environment, the Logical Logs will be used. The administrative tasks performed by the Informix threads will be using the logical log space, even if you don't any database with LOG. When you set the /dev/null, Informix automatically will set …
Logical Logs on OWS 7.20 UC2
What i don=B4t know is what happen when the logical logs get full in a no= t transactional evironment and with then devicel for logical logs set to /dev/null . I will get a dead lock or the logs get empty when On-Line need more space. -- = Un saludo civil http://www.svalero.es/…
RE: Temporary tables
Hi, You can use {on exception and raise exception} clauses to check /drop /re-create the temporary tables... the skeleton code may look like this, ..... on exception (table exists error code) drop table .... create table ..... end exception insert into table check the c…
RE: Temporary tables
Uday TEMP tables are created and will persist for the duration of the = session. If a SP is called multiple times per session, then TEMP tables = will persist across the SP's life. IMHO, I dont think you can DROP a TEMP table short of closing the = session. An easier way would …
Re: Temporary tables
Uday Shankar wrote: > > Hi, > > I am looking for a way to detect if a temporary table > already exists. I am creating temp tables in stored > procedures and the informix manuals tell me that the > tables will exist past the life of the stored procedure's > execution. > > SO, I wo…
Re: Temporary tables
Hi Dianne, Thanks for your message. I didn't want to do that, coz that pre-supposes knowledge of the physical setup of the database and if the database setup changes then my stored procedure might not work. But, I believe I have found a way around the problem just now. I can u…
Re: Temporary tables
First do onstat -d and note which numbers go with your temp dbspaces. Then run this in the sysmaster database: select hex(partnum) x, tabname from systabnames order by x; As an example, our temp dbspaces are 7 and 8. When I run the above query, I look for x that starts with 0…
Temporary tables
Hi, I am looking for a way to detect if a temporary table already exists. I am creating temp tables in stored procedures and the informix manuals tell me that the tables will exist past the life of the stored procedure's execution. SO, I would like to find a way to detect if th…
Re: onstat -p seqscans
tony edwards wrote: > > Hi, > > Does anyone know if the seqscans in an onstat -p increments for > sequential scans on temporary tables ? > > Cheers, Tony. Try the following sql to see which tables have seq_scans. select dbsname, tabname, seqscans from sysmaster:sysptprof; Kern…
onstat -p seqscans
Hi, Does anyone know if the seqscans in an onstat -p increments for sequential scans on temporary tables ? Cheers, Tony.…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Testing View Point Pro
Hello All, While testing NewEra View Point Pro in connection with Informix Online 5.xx and Informix 7.xx on a SUN Server Icame across the following : Starting a simple SELECT... into temp the temporary table has been created, another SELECT on this table has been possible, but t…
Re: Resizing Logical Logs
Also, there is a MAXLOGS parameter in the onconfig file that should be increased. Madison Pruet…
DR Question
Hi Chaps, I cannot seem to create a temp table on the secondary server. (select * from table into temp table;) According to the informix manuals it is only possible to create temp table on the secondary server. The message I get is 229: Could not open or create a temporary fi…
Re: Why long transaction cannot rollback?????
I am not sure whether this applies to your version of Informix; however, I was told in a performance and tuning class that the system will examine the logical logs after passing the high water mark and examine the processes active in the current logical log. If one has five logic…
Re: Logical Logs full, can not be freed!!! Need Help, Urgent!!!
Thanks for your suggestion. However, we had already set the logical log backup device to /dev/null. In this case, what causes logical log full? Sincerely yours, Xiaohui Shen…
Re: ONCONFIG
Kerry Davids wrote: > > Jacob Salomon <jake@apparel.net> wrote: > > >Patrick, > > >onconfig.std is meant as a template to copy from. If I had my druthers, > >I would have it shipped with 666 permissions so that even user Informix > >could not (or at least is less likly to) inadv…
Re: ONCONFIG
>From: satriguy@aol.com (SaTriGuy) >Date: 21 Jan 1997 06:01:04 GMT >X-Informix-List-Id: <news.32813> > >If I had my way, I'd remove it from the system all together so that it >would not be possible to 'accidentally' use the wrong onconfig. ;) >Madison Pruet I think the 'it' refe…
Re: ONCONFIG
If I had my way, I'd remove it from the system all together so that it would not be possible to 'accidentally' use the wrong onconfig. ;) Madison Pruet…
Re: ONCONFIG
Jacob Salomon <jake@apparel.net> wrote: >Patrick, >onconfig.std is meant as a template to copy from. If I had my druthers, >I would have it shipped with 666 permissions so that even user nformix >could not (or at least is less likly to) inadvertently modify it. >(Actually, in …
RE: ONCONFIG
Hi Patrick! OK. please check with env command to see the ONCONFIG environment variable, this sould containg the file being use at this moment, and please, make a copy before you make any changes, Regards :) ---------------------------------------------------------------- Mario…
RE: ONCONFIG
You have to check your env variables. One of them is ONCONFIG which will be set to either of the files. Munaf g086mnf@bomplant3.appl.ge.com ---------- From: informix-list-owner[SMTP:informix-list-owner@rmy.emory.edu] Sent: Friday, January 17, 1997 4:04 PM To: informix-list S…
Re: ONCONFIG
In <32DF327E.1DBB@mediacity.com.sg>, Patrick Stacey wrote: }I see 2 onconfig files in my etc directory (sol 2.5.1 platform). } }one has .ifmx and the other .std } }which do I edit in order to change the system configuration? }Specifically I want to configure informix for a multip…
Re: ONCONFIG
Patrick, Type the command "onstat -c | more". This option prints a copy of the current configuration to the screen, but more importantly, the second line gives the path and filename of the current configuation in use. Tracy > > I see 2 onconfig files in my etc directory (sol …
Re: ONCONFIG
If you have to ask this you shouldn't attempt to modify the file. This is RTFM, very much so. You'll depend on knowing so much before tuning OnLine in this way that if you have missed this in the manuals, you may also have missed a lot of other info. Sorry for this. I don't mean …
Re: ONCONFIG
Patrick Stacey wrote: > > I see 2 onconfig files in my etc directory (sol 2.5.1 platform). > > one has .ifmx and the other .std Patrick, onconfig.std is meant as a template to copy from. If I had my druthers, I would have it shipped with 666 permissions so that even user nform…
ONCONFIG
I see 2 onconfig files in my etc directory (sol 2.5.1 platform). one has .ifmx and the other .std which do I edit in order to change the system configuration? Specifically I want to configure informix for a multiprocessor machine (4 CPUs actually). many thanks, /pks -- [ Pat…
logical logging
Hi I have a question to ask. I am on HP 9.0 O/X with online 5.12 When I changed to /dev/null on the primary drive from /dev/ifmx/1m and then turned off the B logging, then I ran the sql script after long transaction aborted. Once the script was done, I turned the logging back …
Re: Temporary Tables Unload
Mik Hobbs wrote > >I've never tried it before but can you not run 'EXEC SQL UNLOAD TO >"<file>" SELECT * FROM <temptable>;' within the ESQL/C ?? +Jonathan Leffler wrote about one year ago: + +Isn't this covered in the FAQ? If not, it should be. + +The UNLOAD command is not an E…
Re: Temporary Tables Unload
I've never tried it before but can you not run 'EXEC SQL UNLOAD TO "<file>" SELECT * FROM <temptable>;' within the ESQL/C ?? Mike. In article <19961128203800.PAA24866@ladder01.news.aol.com>, pkjones0@aol.com writes >I'm in the process of writing an application in ESQL/C that cr…
Error -710 on a temporary table
Here is a situation that could cause your problem, You do a Find from the ring menu on a program, it loads all the rowids from the main table into a temp table. Then you call a new function that prepares/declares a new cursor that reads from that temp table. Then you open/fetch …
Re: Temporary Tables Unload
Oh, no you can't. UNLOAD is *NOT* an ESQL/C statement. It is supported by I4GL, NewEra, ISQL and DB-Access, but not by ESQL/C itself. Yours, Jonathan Leffler (johnl@informix.com) #include <disclaimer.h> }From: Martin <martin@georgeson.co.uk> }Date: Fri, 29 Nov 1996 15:46:49 +…
Attaching Temp Tables from access
I was just wondering if there was any way to attach temporary tables from access??…
Re: Temporary Tables Unload
Martin wrote: > Hi Pete, > If its not fancy layout your looking for, use the unload command as you > said. You can specify the unload command in your ESQL/C like any other > SQL that will be in your code. > > Martin Man Sorry, last I saw, unload is not supported in ESQL/C. You'…
Re: Temporary Tables Unload
pkjones0@aol.com wrote: > > I'm in the process of writing an application in ESQL/C that creates a > series of temporary tables as a intermediate step. What's the best/easiest > way of dumping the contents of the a temp table to a file for the purpose > of debugging. > > Something…
Temporary Tables Unload
I'm in the process of writing an application in ESQL/C that creates a series of temporary tables as a intermediate step. What's the best/easiest way of dumping the contents of the a temp table to a file for the purpose of debugging. Something along the lines of the UNLOAD comman…
Re: Help I'm in crisis
Hi Tony, Check you $ONCONFIG file if the PDQPIORITY > 0, modify it to be 0, that means disable PDQ in $ONCONFIG. Please set PDQPIORITY as user environment variable for large report/ bach job only. Otherwise, every single session takes a lot of memory. Regards Eric Lam Taipei/Tai…
Error -710 on a temporary table
Why sometimes a error -710 appears in a INSERT o UPDATE sentence to a temporary table when i execute then same program several times in a 4GI module Thanks, -- Rossend Guardia i Massegur rossendg@grn.es SPAIN…
What causes a temp file to be used?
I have a select with a join to another table on the primary key, and an order by of custnum, callnum in the primary table. The set explain shows that a temporary file is created due to this order by, yet I have an index of custnum, callnum on the table. Why would this use a tempo…
Re: onconfig
Hi Sue, >Hi there. I am an Oracle/Sybase dba. I've just been put on a project >which uses Informix Workgroup Server V7.12 on Windows NT. I have no >training or manuals in either Informix or NT, so this question may >appear to come from a simpleton. Stop right there. Go and fin…
Re: onconfig
> From: Sue Alsbury <salsbury@mdshealth.com> > Date: Friday, October 18, 1996 4:11 PM > > Hi there. I am an Oracle/Sybase dba. I've just been put on a project > which uses Informix Workgroup Server V7.12 on Windows NT. I have no > training or manuals in either Informix or NT, so …
Re: onconfig
In article <3267E47A.54DA@mdshealth.com>, Sue Alsbury <salsbury@mdshealth.com> writes >Hi there. I am an Oracle/Sybase dba. I've just been put on a project >which uses Informix Workgroup Server V7.12 on Windows NT. I have no >training or manuals in either Informix or NT, so this …
onconfig
Hi there. I am an Oracle/Sybase dba. I've just been put on a project which uses Informix Workgroup Server V7.12 on Windows NT. I have no training or manuals in either Informix or NT, so this question may appear to come from a simpleton. I issue a select * from tablename. The tab…
Re: Misunderstood DBSPACETEMP ?
David Williams wrote: > > This is odd - Check Informix Online Dynamic Server > Admin. Guide, Volume 2 Version 7.1 Page 38-18. > > "The DBSPACETEMP configuration paramaters is a list of dbspaces used > to globally manager the storage of temporary tables" > > "If bot…
Re: Misunderstood DBSPACETEMP ?
David Williams <djw@smooth1.demon.co.uk> wrote: > This is odd - Check Informix Online Dynamic Server > Admin. Guide, Volume 2 Version 7.1 Page 38-18. > "The DBSPACETEMP configuration paramaters is a list of dbspaces used > to globally manager the storage of temporary table…
Re: Misunderstood DBSPACETEMP ?
Stefan Weideneder <stefan@www.weideneder.de> wrote: >Hi folks, >has anyone some experience with DBSPACETEMP ? Starting with version >7.0 ( an inofficial version ) until 7.12UC1 I've made a few tests >with temporary tables. Now I wonder, if I was wrong. >My problem: >I create …
Re: Misunderstood DBSPACETEMP ?
In article <325A9392.1C99C17C@www.weideneder.de>, Stefan Weideneder <stefan@www.weideneder.de> writes >Hi folks, > >has anyone some experience with DBSPACETEMP ? Starting with version >7.0 ( an inofficial version ) until 7.12UC1 I've made a few tests >with temporary tables. Now I…
Dropping temporary tables version 5.02
I was creating a temporary table and using it to contain the results of a select which included a join with a matches statement. When the temporary table came to be dropped the following error occurred sqlerror -242 could not open database table <owner prefix>.<table name> syst…
ERROR 565
Platform : informix SE 5.01 with windows client. When droping a temporary table, a fetch on a previous opened holdling cursor with clause ORDER BY return error -565. It seems that updating the Informix SE dictionnary deletes temporary results due to the ORDER BY clause . Have any…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: Drop Temporary Tables
mauro@dgeaix2.ed.gba.gov.ar wrote: > > Hi friends, > We have another problem. This is, that in a 4GL we can't Create and Drop > temporary tables n times ( n :1..m, and m is a random number), because, > the program hangs in the Drop statement. > has Anybody Know a Sol…
Drop Temporary Tables
Hi friends, We have another problem. This is, that in a 4GL we can't Create and Drop temporary tables n times ( n :1..m, and m is a random number), because, the program hangs in the Drop statement. has Anybody Know a Solution ????? *****************************************…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
Re: Long transaction
I was being silly - I was thinking it was the percentage of the last log file not a %age of the whole logical log space. -- Tony McCartan Tony Mc (UK)…
Process Priority with onilne 4.10
Does Online ver 4.10 have fixed priority support like ver 7.0 does with the NOAGE onconfig param. Thanks Chris…
Temporary tables with 4GL/Windows
Does anyone know about when you create a temporary table, then go to select or insert to it you get a compile error on the select/insert!!! This appears in the letest version that is available to us, but not in the older ones.…
Re: help: I-NET and t_open function problem
No space left on device ussually means you've run out out disk space. It might be being used to create a temporary table or something. -- Mike Aubury…
Re: Temporary tables
In article <cmatternCsotsE.EpM@netcom.com>, cmattern@netcom.com (Chuck Mattern) writes: If you're new to INFORMIX you might want to check out my tools: tschaefe@encore.com Let me know.…
Physical Log and Logical Log
Hi Folks, I found some case at my friend's site. His Physical Log and Logical Log setting is : Physical Log size = 2000 Kbytes Logical Log size = 10000 Kbytes No. of Logical Log = 10 When he run daily 4GL-application with 70-80 users simultano…
Re: Problems when opening cursor for prepared statement twice
Hi Paul, P> I may be wrong, but are you creating a temporary table somewhere else P> within your program. If this is the case then change the create command P> to read i'm not explicitly creating a temporary table. The OPEN CURSOR will itself create a temporary table becaus…
Re: Can ACE select a CHAR field and treat it as an INTEGER?
One way I have done this, is to select your data to a temporary table. Alter the temporary table column to be an int. Then do the select and order from the temporary table. George USDA-SCS…
Re: Temporary tables
Chuck Mattern (cmattern@netcom.com) wrote: : I'm new to Informix coding and off on my first mission. I need to : unload the contents of a table at a remote location to an ascii file, : ftp it to my location and load it into a temporary table for viewing. : Once the application i…
Temporary tables
I'm new to Informix coding and off on my first mission. I need to unload the contents of a table at a remote location to an ascii file, ftp it to my location and load it into a temporary table for viewing. Once the application is exited the table and the file should be deleted. …
Logical Logs
>Sender: news@srgenprp.sr.hp.com (News Administrator) > > We are running ONLINE 5.02 UC1 on a HP9000 series 867 under HPUX 9.04. > Our tbconfig said LOGFILES 6 >>>>stuff deleted > LOGSIZE 500 > My question is: Is there an optimum balance between LOGFIL…
Re: Online Engine vs Standard
In article <2n7b4b$8ut@emory.mathcs.emory.edu>, Jack Parker <jparker@hpbs3645.boi.hp.com> wrote: >Others? 9. Be careful using temporary tables. Use the WITH NO LOG clause when selecting into a temporary table. -- Rodger Anderson…
checking status of job
When running a very large query in 4gl, is there a way to check how far through the database the query has advanced? We were running a query for over 24 hours and it still had not completed when we stopped it. The selected rows were being put into a temporary table with out log…
Problems with temporary tables in INFORMIX
We are running DOS INFORMIX-4GL V 1.10.06E on a 286 Librex notebook running MS-DOS 5.0. We use the protected mode engine, and protected mode applications. Much of our code uses temp tables ; Often we execute statements such as the following : create temp table foo (s serial…
logical logs
I am running informix-online 4.00.UH2 on a Pyramid MIS-12/05 (OSx 5.1a). Part of the output from 'tbstat -l' is listed below: address number flags uniqid begin size used %used e0068944 1 U---C-L 5 100d64 250 66 26.40 e0068960 …
Temporary Tables in 4GL
G'day, I have a client site where they have a 4GL program that stores the result of a query-by-example into a temporary table. The rows in the temporary table are then displayed in list format for further user selection. When one person is using the application it all works fi…
Re: Indexes on temporary tables
Path: emory!swrinde!mips!dimacs.rutgers.edu!rutgers!pyrnj!pyramid!infmx!aland From: aland@informix.com (Colonel Panic) Newsgroups: comp.databases.informix Summary: 4.0 RDS-specific bugs Message-ID: <1991Oct16.052008.27205@informix.com> Date: 16 Oct 91 05:20:08 GMT References: <51…
Indexes on temporary tables
Path: emory!swrinde!cs.utexas.edu!uunet!snorkelwacker.mit.edu!apple!uokmax!munnari.oz.au!deakin.OZ.AU!rand!auzodt3!shaneb From: shaneb@auzodt3.mel.cocam.oz.au (Shane Booth) Newsgroups: comp.databases.informix Message-ID: <515@rand.mel.cocam.oz.au> Date: 14 Oct 91 06:56:18 GMT Sen…
Re: Variable array definition.
> Unfortunately the temporary table will not work with the display > array functions. (If you can get it to work, _p_l_e_a_s_e_ let me > know how. Many of our applications use a query to fill an array > which will be displayed for user selection. If I set the array > size too …