Oninit® Archive
Results for “JVPJAVAHOME”
Java Version for Informix Installation
Hello Tatiana, You can run ids installation command with LAX_VM option where you need to provide path to your java jre, e.g. /home/informix/inst/ids_i nstall LAX_VM /home/informix/j ava/jdk-11.0.30+7-jre/bin/java BR Jiri…
oncheck warning,What impact will it have on the future?
Ok, I make sense. Althrough I can't see that parameter in ONCONFIG, but it really exists with default value. ------------------------------ chuan lu ------------------------------…
Informix 14.10 FC11 WE on Red Hat 9.4 X64 - ids_install issues
Hi, I'm installing Informix 14.10 FC 11 WE as root on Red Hat 9.4 with Oracle JREJava 1.8 ( jre-1.8.0_421-oracle-x64 ) but the installer is encountering errors during installation (errors below from ids log) seems an issue with the JRE, also the Informix instance that is created…
Large memory segment vs smaller ones
No ONCONFIG changes are required. ------------------------------ Doug Lawry Oninit Consulting ------------------------------…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Call API from INFORMIX 4GL
Indika: I do not believe that you can do that from any Classic 4GL code, not directly anyway. (It would be possible to create a "C" callable wrapper that called out to a JRE.) If you need that capability, all three of the 4GL superset languages, Querix Lycia, 4Js Genero, and Aubi…
Starting up InformixHQ
Jacob, I think the reason things work without setting JAVA_HOME is that Informix includes its own JRE. It is installed under $INFORMIXDIR/extend/krakatoa/jre. That directory gets added to the informix user's PATH. Check $INFORMIXDIR/${INFORMIXSERVER}.ksh which is created when …
UUID initialization failure IDS 14.10.FC8
hi, Hrvoje's solution should not work in your case as it uses the exact same API calls as our built-in Java UDR. The problem from the stack looks like an error in IBM's JRE itself which is bad news. Not sure if the machine is in production, but if there is downtime on the instan…
Informix 14.10 FC8 installation on Linux
Hi, Any idea on the following errors ? Done this for 20 + years, first time got this:-) Thanks Frank 1) case 1 Root# ./ids_install Preparing to install Extracting the JRE from the installer archive... Unpacking the JRE... Extracting the installation resources from the installer a…
restore through STDIO
HI, ifxclone can change the onconfig on the target instance E.g. it will turn off DIRECT_IO and can also change bufferpool entries! Regards, David. ------------------------------ David Williams ------------------------------…
Problems with temporary dbspaces
Hello, Change the DBSPACETEMP entry in onconfig file , separated them with semi colon (;), instead of comma (,). Rebounce ids, and see whether the error disappear. Hope it works -Fauziah-…
ontape does not finish the backup: tape full
TAPESIZE in the onconfig set to zero? Backups to disk running into a tape full and asking for a second tape should not happen. Hal Maner M Systems International, Inc.…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
Phys Log Size Inconsistency?
Disregard. I confused the ONCONFIG parm with the actual phys log. Forgot to actually run onparams! My total bad. DG…
RSS: Different # CPUs?
Those were my thought exactly. But, was uncertain whether RSS required identical settings in ONCONFIG as the primary. Thank you. DG…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
onmode bug discovered (-wf)
Don't believe in a bug here. When starting the server he knows about the onconfig-file from the environment variable ONCONFIG. If you change this variable when the server is running it will not know the new value. Assuming that variable is only read once during the startup of th…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
error initializing 11.70.FC9
>> The Oracle jdk. Java developers kit. I dont think its related to your issue, I >> was getting the error during the Informix install, not at init time. Just >> found it interesting (and infuriating). Thanks for the clarification. I'm guessing it came up in your situation becau…
IDS 12.1 Installs without jvm library files
All, Does anyone know if it causes an issue with IDS 12.1 to install the product WITHOUT the JRE library files under ${INFORMIXDIR}/jvm? Thanks, Bob…
IDS CRASH WHEN INSTALLING UDR
Why's the online.con message stating /opt/informix_new/... while online.log using /opt/informix_prd/... ? I take it that /opt/informix_new/extend/krakatoa/jre/lib/amd64/compressedrefs/libj9thr26.so is present - is the same true with /opt/informix_prd? From: "JULIO MARTINEZ" <jm…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Bug in MacOSX IDS 12.10FC9DE (but probably other M
Since it=E2=80=99s community supported, I don=E2=80=99t really know how = else to report this defect. The provided script rest_listener_start.sh : #!/bin/sh ${INFORMIXDIR}/extend/krakatoa/jre/bin/java \\\\ -cp = ${INFORMIXDIR}/bin/jsonListener.jar:${INFORMIXDIR}/nosql_sdk/tomca…
Install Informix 12
Hello folks, OS Platform : Centos 7 IDS version: 12.10.UC9 Trying to install Informix 12.10.UC9 on a Linux Centos 7 and kept getting same error message Missing license file LA_in Missing license file LI_in Tried it also on Centos 6, same result Any idea on what could be the p…
ROOTDBS file
I did not find the AUTOLOCATE parameter in onconfig file as well as onconfig.std file also. Im using IDS 12.10 FC8 version…
Update Statistics
what kind of things could I check in the onconfig file. They are working on getting me IBM technical support help, but that will be a few hours away.…
Installing Informix 11.5 on Redhat
Hi, what does this command do to help me? I am trying to figure out what I need to download for java? JRE? JDK? OPENJDK and what version? Once I get that on the server, do I run your command to actually install the file I downloaded? Thanks Benji…
IDS 12.10 - Query Slow
Hi, I means value on onconfig 12.10 same or better than value onconfig IDS 11.10. i don't copy onconfig file and put on IDS 12.10. I already rebuild of your statistics is highly. We don't have performance issue for overall our system, only a few program, especially program runn…
ON-Bar database server is dismissing the logical
Thanks Art and Martin. IDS bounce worked as onconfig was changed for LTAPEDEV earlier. Thanks, ~ Pravin Bankar…
DBSPACETEMP Parameter
Hi, The DBSPACETEMP Parameter in onconfig file create automatically the temporally dbspaces ? Or They must be created with onspaces utility. Thanks in advance.…
RE: Having issues with jsps
I have updated my email, so I hope this will now go thru... I was able to resolve this issue by using the following in the onconfig file: JVPJAVAHOME /etc/alternatives/jre/lib/amd64 JVPJAVALIB /server Thank you! Mary Villagomez Informix & MySQL DBA Member Technology Office: B2…
RE: Having issues with jsps
Hi, On Linux el6.x86_64, and informix 11.50.FC9: I have installed java and the jdbc driver, and when I try to run a remove jar command, I am getting an error loading a library, libjsig.so. I have checked the library is there in the jdk directory. Here is the error: 15:22:00 Booti…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
Informix Developer Edition on ARM/BeagleBone Black
Guy, Try the Open-JDK. I'm looking back at the install logs, and for the SUCCESSFUL install it shows: sun.boot.class.path: /usr/lib/jvm/java-7-openjdk-armhf/jre/lib/resources.jar /usr/lib/jvm/java-7-openjdk-armhf/jre/lib/rt.jar /usr/lib/jvm/java-7-openjdk-armhf/jre/lib/sunr…
Receiving error while trying to begin Informix ins
Hi Ernie ..... long time no talk. ;) It can't find the JRE. You can point to it by: ./ids_install -javahome your_JRE_path if it's installed. You can extract the JRE from the install media as well if you don't have it installed on the current box. It can be extracted manually f…
BTS fails after ontape Restore
Hi Mark, Backup is done by 'ontape -s -L 0' Restore was done with 'ontape -r' No extra special parameters. And as I was typing this email, I was collecting the appropriate BTS-related lines from the 4 onconfig's in play (we use a special 'backup' onconfig for ontape). Lo and b…
Root db space fills up
as metioned above, maybe you need set TEMPTAB_NOLOG in you onconfig file…
Error Message in online.log file
Hi André. What setting do you have for ALRM_ALL_EVENTS in the $ONCONFIG file? I have found "alarmprogram.sh" can loop if set to 1. Regards, Doug Lawry…
RSS not working
Fee disk space on the chunk partition ok on the RSS server? Can you post your onconfig?…
Setup HDR
Sounds like the onconfig has the same STACKSIZE but what both servers read in at initialization is different. Bounce both servers and see if it's fixed.…
Physical Log size 2000 is too small
Hi, the onconfig we are using is from a inf version 9.7 wherein no PLOG_OVERFLOW_PATH located in it. I tried adding it to the onconfig and put a location but the inf instance when restarted still always fails. As for the onmode command we are always using onmode -ky maybe it's b…
ERROR doing ontape
Thanks for your response! So, is it possible to create a new dbspace then set it in $ONCONFIG and restart the instance? best regards…
ids_install error message
Hi All, I am trying to install "IENTE_12.10.FC3_HP_ITANIUM_64_EN" on a "HP PA-RISC 8700/8750" server. When I run ./ids_install -i console -java none or ./ids_install -i console I get the following message : " Launching installer... ./ids_install: /tmp/install.dir.29431/HPUX/r…
virtual segment question
Did you try to increase the number of locks in the LOCKS parameter in Onconfig? Lloyd…
ontape error message
Increase the value of TAPESIZE parameter in onconfig and try the backup. Lloyd…
Onconfig name
Hi, I am developing a JDBC application, and need to read from within SQL the onconfig environment variable. From with IDS 11.70, I can extract the need information using the query: select trim(env_value) env_value from informix.sysenv where env_name = 'ONCONFIG'; The code nee…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
Problmes using ontape with an IBM TS2900 changer
The TAPEDEV section in the onconfig is as follow: TAPEDEV /dev/IBMTape0 TAPEBLK 512 TAPESIZE 0 We have played with the TAPEBLK from 512 to 4096 to no avail.…
Informix install - could not find libjava.so
Either install the JRE or you could try ids_install -legacy which should extract the java install file to a tarball which you could install manually using the old install shell script. Don't know if that extract will work without a JRE installed, but give a try. Art Art S. Kage…
how stop jre unpack
This concerns IBM Informix Dynamic Server Version 12.10.TC1IE on Window Server 2008R2 . The windows event logs show this several times a day. Activation context generation failed for "c:\\\\informix\\\\jre\\\\jre\\\\bin\\\\unpack.dll".Error in manifest or policy file "c:\\\\info…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
How to set up temporary space per session
True, but I have noticed that you need register previously the temporary dbspace in onconfig file, I thought there was some way to make the settings "on the fly", by session. Roger…
recover SQLHOSTS file
Do the onconfig files also have that info?…
Auto Update Stats
Hi, I have one more query. I have the below entries in onconfig file for AUS AUTO_STAT_MODE 1 STATCHANGE 10 USTLOW_SAMPLE 0 Now all my tasks(mon_table_profile,Evaluator and Refresh) running fine at scheduled time. Now when I remove the above entries in onconfig file, still al…
Performance Tuning Discussion
What are the tools to perform monitoring and tuning on the informix instance? As far as I know I've been using onstat - (lots of options) but I doesn't seem to enable to interpret all the information. My goals is to get Nice DSS Performance. For OLTP function it is necessary to …
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
unpacking IFMXULTIMTED11.50_FC9_LNX86_64MLRPM.bin
i have tried to install on RHEL Red Hat Enterprise Linux Server release 5.9 Linux version 2.6.18-308.el5 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (R ed Hat 4.1.2-50)) #1 SMP Fri Jan 27 17:17:51 EST 2012 fails on this as well see below. ./IFMXULTIMTED…
Page size
Where do you set the page size when configuring Informix? I don't see it in the ONCONFIG anywhere.…
Re: manually edit onconfig?
You should never install the new version over the current one. If something goes wrong in the upgrade you'll have much more work to recover. Regards On Mon, Dec 17, 2012 at 6:38 PM, June Nebab LKINY <jnebab@gmail.com> wrote: > Planning an upgrade to 11.7UC6GE from 11.7UC5GE. I…
RE: manually edit onconfig?
I would give a try to the new onconfig_diff utility, it seems to help you identify and correct some of them.... Check it out! https://www.ibm.com/developerworks/mydeveloperworks/blogs/idsteam/entry/how_to_use_the_onconfig_comparison_tool_onconfig_diff3?lang=en Regards. Alexand…
Re: manually edit onconfig?
I'm a big fan of copying the current settings into the new ONCONFIG file. It gives you a good chance to see the new parameters, like those you mentioned - all of which were available in 11.70.xC5 BTW, so someone used an older ONCONFIG instead of editing the new one last time. By…
Re: manually edit onconfig?
Figure out what each of the new ones do, whether you want to use them or not, then add them to your old onconfig. Ideally on a test environment. j. On Dec 17, 2012, at 1:38 PM, June Nebab LKINY wrote: > Planning an upgrade to 11.7UC6GE from 11.7UC5GE. Installing new version o…
manually edit onconfig?
Planning an upgrade to 11.7UC6GE from 11.7UC5GE. Installing new version on same $INFORMIXDIR and on same server. I noticed new onconfig params (ie: AUTO_READAHEAD, NUMFDSERVERS, etc) that are in the UC6GE onconfig.std that are not in my $ONCONFIG. What is the proper way to dea…
Arggghhhh!!!!!!
Hi Neil, Very likely an existing JDK/JRE path, which is incompatible is interfering with installer's functionality. Can you check your path variable, for any reference to existing JDK/JRE installation? Temporarily remove it and retry installation. Note: - Some of the JDK/JREs …
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
Error # 40002
Also set AUTO_REPREPARE 1 in your $ONCONFIG file. Regards, Doug Lawry…
Re: help with informix on windows oncheck -pr erro
ok sounds like silly question but how do i find out what ONCONFIG variable is on windows ? which is likely to be correct set ONCONFIG=oncfg_apecert.0 ::set ONCONFIG=ONCONFIG.apecert…
Customer upgrade from I4GL/SE 4.1 on SCO UNIX.
As things stand right now, you can purchase it until 8/17/2013. Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on my employer,…
Config Help
Your biggest performance problem is that you are running your server on a VM. IO performance under VMWare is VERY VERY POOR and, as I've said several times already this month, databases live and die on IO performance. Art Art S. Kagel Advanced DataTools (www.advancedatatools.co…
doubt about parameters (PDQ)
Sorry people, I meant the MAX_PDQPRIORITY 100 onconfig parameter.…
What are best onconfig parameters for a DSS app
1. Informix 11.70.TC4DE, Windows Vista with Dual Core Processor, 8GB RAM, 1TB HDD: 2. DSS app for querying a 200MB table, joining to a couple of fact tables. 3. Mainly aggregate and time series queries against a transaction history table. 4. Only one user will be submitting queri…
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
NOFUZZYCKPT: onconfig parameter or environment variable?
Is NOFUZZYCKPT an onconfig parameter or an environment variable? Is there any definitive documentation? Still running IDS 10 on Linux.…
Testing the 'free' versions - moving from Dev edition to Innovator-C
Art, thanks - I've gone for the separate INFORMIXDIR install (just had to change $INFORMIXDIR, $PATH and some paths in $ONCONFIG) and it's come up just fine.…
Spatial Data
hello reading thru the manual states that the ONCONFIG parameters for SBSPACENAME and SYSSBSPACENAME must be set for the default sbspace. We are running an HDR pair and have the parameters set on the Primary Server - does it also need to be set on the Secondary Instance ? thank…
CSDK 3.70 install on Ubuntu installation error, anyone?
Before I go banging my head on a brick wall, Mike Aubury has kindly reminded me that you folks may be able to help here! IDS11.70 developer edition on Ubuntu 11.04 I downloaded the Linux installation of CSDK 3.70UD3 and went to install it on a known good installation of IDS11.70…
ODBC (SDK) for Redhat 2.6
Hi, We tried to install the SDK version 3.70.FC3 in Redhat2.6 and we encountered error. Do you have any advise? ./installclientsdk: line 2526: /tmp/install.dir.31758/Linux/resource/jre/jre/bin/java: cannot execute binary file ./installclientsdk: line 2526: /tmp/install.dir.3175…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Informix crashes when installing a .jar file
Hi. I'm having an issue with using J/Foundation on a Informix 11.70.FC2 installation. The database server crashes when I attempt to install a simple .jar file (e.g execute procedure sqlj.install_jar). The OS is RHEL 5.3. online.log output: 14:57:17 Booting Language <java> from…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Moving from Informix SE to Innovator-C
On May 19, 12:47 pm, Jon Ritson <JonRit...@Sky.Com> wrote: > :o) > > If you want more help post your : > > linux_host.env > linux_host1.env > and > $INFORMIXDIR/etc/sqlhosts > > "oninit -k" is not a valid command, I assume you mean "onmode -k". > > Also the message should give yo…
ontape -p/r with changed ROOTPATH
Jack Parker Wrote: ================================================================================ Not sure if you noted that you also need to change your $ONCONFIG = ROOTPATH to point to what is on the backup image. j. ==========================================================…
Install Informix 11.7FC2
Hi, I am trying to install IDS 11.7FC2 on SUn Solaris 10. When I run ./ids_install - console I get the following message : Preparing to install... Extracting the JRE from the installer archive... Unpacking the JRE... Extracting the installation resources from the installer arch…
Why am I getting this warning?
AIX 5.3 - IBM Informix Dynamic Server Version 11.50.FC8 Can someone tell me why this warning is appearing in the online.log each time the instance is initialized. I checked the value of SHMBASE and it matches the value below. 09:33:28 WARNING: If you intend to use J/Foundation …
SHMBASE
Informix 11.70 AIX 780 The following error appears in the logs. While this is a warning message, we would like to get rid of it. WARNING : If you intend to use J/Foundation or GLS for Unicode feature (GLU) with this Server instance, please make sure that your SHMBASE value spec…
Is KAIO in use
Hi, I red the article and found that what I should have set as OS parameter is KAIOON=1 (instead of setting KAIOOF to 1). So I changed my conf and tested once again. With KAOIOFF=1 I have this informix@pthd02:pthdpthd_tcp:/produits/informix> env | grep KAIO KAIOOFF=0 IFMX_AIOK…
Re: Quick question ... which version (release) of Java JVM ships w Informix 11.7x?
>From Infomrix 11.70.FC1: $ cat $INFORMIXDIR/extend/krakatoa/copyright Licensed material - Property of IBM. IBM(R) SDK, Java(TM) Technology Edition, Version 6 IBM(R) Runtime Environment, Java(TM) Technology Edition, Version 6 .... Art Art S. Kagel Advanced DataTools (www.adva…
Quick question ... which version (release) of Java JVM ships w Informix 11.7x?
Informix has a Java JVM in the engine. My question is which JVM (Sun??er Oracle or IBM)? Which release? For example... Sun Java JDK 1.6_23 ? (That's java 1.6 release 23) Thx -G…
question about Query with joined view
Have you tried "IFX_FOLDVIEW 1" in your environment or $ONCONFIG file? Regards, Doug Lawry…
JRE Shared Libraries with multiple installations
On 19/01/2011 04:26, Beau Nanaz wrote: > On 1/18/2011 4:56 PM, Jonathan Leffler wrote: >> >> >> On Tue, Jan 18, 2011 at 11:50, Richard Harnden >> <rh.nospam@tiscali-co-uk.invalid> wrote: >> >> On 18/01/2011 06:42, Beau Nanaz wrote: >> > I am about to install and configure two ins…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
sqlerr:-243 and isam err:-111 in esql/c
This "may" be a good place for USELASTCOMMITTED set to all in the onconfig.…
Primary Slowness when RSS is active
You need to set LOG_STAGGING_DIR parameter in onconfig of the rss…
Network driver cannot bind a name to the port
Keith In fact, the instance is a clone created by copying the volume group of an instance files from another AIX box (let's call the box pcoi01) to the actual (same) AIX (version) box (called pcoiic01) therefore is the first time I'm trying to run the instance. Folloing is the …
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
What SOA facilities are available?
Java JDK + JDBC You can make java webservices in plain text, compile and run. http://www.java-tips.org/java-ee-tips/java-api-for-xml-web-services/developing-w eb-services-using-j.html If you want and IDE, NetBeans can help very well. If you want to deploy something more complic…
Availables : More that 3500 Solutions manuals and Test Banks (Part 2)
List of Solutions Manuals _________________________ contact me to : mattosbw1@gmail.com mattosbw1(at)gmail.com NOTE : "THIS SERVICE IS NOT AVAILABLE FOR : CHINA, INDIA, PAKISTAN, IRAQ, IRAN, PHILIPPINES, NORTH KOREA, NEPAL, BANGLADESH, SRI LANKA, MALDIVES & BHUTAN". If…
Install IDS from iiug :error wizard.inf (104)
Hi, While installing IDS11.5 64 bit on Fedora, getting error.. .............could not load wizard specified in /wizard.inf (104) Installed JRE as specified .. ./ids_install javahome /usr/bin but still its not working... Any idea? Prabal…
wizard error installing IDS
rerun the installer with -javahome none (or maybe its -java-home=none - if you run the installer with -help it will print out the options, including the java home directory option - just pass it the argument 'none'). It's a problem with the installer's JRE runtime version detecti…
Re: RE: new onconfig parameters added onconfig fil
Typically, I make a copy of the onconfig.std, naming it something like cheetah_online. Then I open up both the old and new onconfig, side by side, and copy from old to new. Obviously, the new onconfig has new params that were not addressed in the old onconfig and may have elimina…
Re: RE: new onconfig parameters added onconfig fil
Isn't that what I said? "If you simply just bring up the instance using your old onconfig, I believe that you will get whatever the default is for the new parameters, even though you do not mention them in your old ONCONFIG." -----Original Message----- From: ids-bounces@iiug.or…
new onconfig parameters added onconfig file 11.5
hello folks Can any one tell me at what stage the new onconfig parameters are added to the onconfig file when upgrading from 11.10 to 11.5. I have converted two instances from 11.10 to 11.50 One onconfig file has the new parameters at the end of the file the other doesnt have any…
Ontape restore : Fast recovery hangs
Hi, I've launched an 'ontape -r -rename -f <file>' to restore an instance version 940 from a tape. But since 2 hours the instance is in Fast Recovery mode as 'onstat -' shows below : informix@pcoi01:pcoipcoi_tcp:/bases/informix/pcoipcoi/var/bdump> onstat - IBM Informix Dynamic…
To IBM - DeveloperWorks - Articles
Hi, This message is to IBM . In the DeveloperWorks have a lot of nice Informix Articles , but most of them very very olds (2001-2006) what they treat only old IDS versions without consider news resources and updates.... Is time to review and update all this articles , isn't ??…
RE: More IDS install woe ...
Sorry but that's the stupidest thing. Not the RPM but the shipping of a specific JRE with the install. But hey unset JAVA_HOME is pretty easy except that you have to probably also remove /usr/bin from your path so you don't pick up /usr/bin/java. Wouldn't it be easier to requir…
More IDS install woe ...
IDS 11.5 FC6 on RHEL 5.4 More JavaShite problems with the normal install and get the stuff below starting ++++++. Even Surnam's workaround of extracting the .jvm.bin can't save me this time. Try the RPM install: sh CZ79JEN_ids_115_fc6_ee_rpm.bin Preparing to install... Extrac…
Re: performance improvements for dbimport?
Thanks for all your valuable input. I changed some parameters now: 21:09:27 Onconfig parameter BUFFERPOOL modified from size=2K,buffers=262144,lrus=8,lru_min_dirty=5.0,lru_max_dirty=10.0 to size=2K,buffers=524288,lrus=8,lru_min_dirty=10.0,lru_max_dirty=50.0. 21:09:27 Onconfig p…
BACKUP_FILTER in onconfig
Hello, when I using BACKUP_FILTER in $ONCONFIG, parameter for "The tape block size, in KB, for backing up logical logs" is NOT LTAPEBLK, but it is TAPEBLK. Everything work fine (LTAPEBKL for logical log) when I turn off BACKUP_FILTER ... This is happening with ontape, with BAC…
libjsig.so: cannot open shared object file
Thanks Keith. $INFORMIXDIR=/home/informix which is a soft link to /IDS/IDS115FC6X2 In any event I have tried both ways. I have located the 'missing' library libjsig.so in JVPJAVAHOME/bin; but the jvm library libjvm.so is in JVPJAVAHOME/bin/j9vm. Maybe this is the way things are s…
Initialization of Java virtual processor failed
when trying to install a java udr i'm getting the following nessage: 9444: Initialization of Java virtual processor failed: (cannot create gc file) Can anyone help? Here is the statment: execute procedure install_jar( "file:$INFORMIXDIR/extend/krakatoa/examples/Env.jar", "env_…
IDS 11.50.FC6 Installation
Installed and configured SUSE SLES V11 on a HP RX2600 for the first time this week. Yesterday, I tried to install IDS 11.50.FC6 and had a problem. After extracting the tar file, I executed the ./ids_install script from $INFORMIXDIR as root. Answered No to run in GUI mode, get th…
Re: HDR crashed after upgradation
Hi, I am trying to upgrade from IDS V11.50FC4 to IDS V11.50FC6. We currently have Replication running(HDR). We have a primary, secondary and RSS running. I followed the recommended steps but this did not work on the secondary and RSS. Here is what i did: Installed new version of …
garbage text in SHMNOACCESS parameter
On Jan 21, 8:15 am, Ian Michael Gumby <im_gu...@hotmail.com> wrote: > Just a guess. What's the hex value for that string? > grep ^SHMNOACCESS onconfig SHMNOACCESS �����������" ������� grep ^SHMNOACCESS onconfig |cut -c17- �����������" ������� grep ^SHMNOACCESS onconfig…
Random Server Slowdown "Redone"
There are some usual things you could do for now: 1) calc your database ratios, I think there are several NETTYPE, BUFFERS and even BTSCANNER options that could be optimized, you could download Mr. Art script to automatically know these important numbers!!! It´s on the download …
Physical restore failed - function write physical
Hi, I have a dataserver on an AIX box. I made an ontape backup of this dataserver. Now, I'm trying to restore this backup on another AIX box where the source raw devices was created with differents names and differents links path names. I create à file (convert.txt) containing …
Re: IDS 11.50.xC6 is out...
Ian Michael Gumby wrote: > Sigh Fernando, I wish you'd stop to think before you post. > > First, I am working with a client were part of my job is to build out a > cluster of machines. While the hardware guys did a bang up job of > building out the machines and installing the bas…
Re: IDS 11.50.xC6 is out...
"Sundar Shunmugam" <sundars@us.ibm.com> wrote in message news:mailman.421.1262626185.6236.informix-list@iiug.org... Few clarifications to questions / comments: >> 1. Installer always attempts to use JRE from the PATH first. It enables >> the installer to start quickly. In case …
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
Sybase 15.0 installation issue on sles10-sp2PPC
Hi, I am installing sybase on sles10-sp2 on IBM power pc's. When installing I get error that JRE could not found but I had installed jave JDK and JRE also below is output. Jave version shows correctly. ibm-java-ppc64-sdk-6.0-5.0 ibm-java-ppc64-jre-6.0-5.0 ibm-java-ppc64-javac…
DYNAMIC_LOGS in ONCONFIG
Good afternoon, We occasionally have a programmer than needs a large amount of log space to move a very large table. Instead of fiddling with the HTXHWM and LTXEHWM in the ONCONFIG file, has anyone successfully setup DYNAMIC_LOGS with IDS 10.00 on HPUX? Where would the dynamic …
Unsufficient buffer size for error message
Hi Please check your online.log and check also your onconfig file. thanks.…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
How to config J/Foundation for multiple instances
And, that is what I did: moved jre to /usr/lib/informix and recreated the IDS.11.50.FC3-JRE1.5 symlink to it. Now any version 11.5 package that happens to be on that node thru failover, or during upgrades to other nodes will have no problem. But, it still bugs me that I can't ch…
Configuring 2nd informix instance on the same serv
Configuring 2nd informix instance on the same server is not going through in my setup..... Step1 : Informix Instance (sportage1) is created as a demo instance while installing IDS on an AIX box. It is running now and i want to create an another instance sportage2 on the same ser…
Insert into an indexed table is really SLOW!
MIKE DUNHAM-WILKIE wrote: > I am running into performance problems inserting into an indexed table, using > Informix 11.50. The following timings for loading into > compressed/uncompressed, indexed/non-indexed tables using dbload/HPL-Deluxe > more illustrate the problem. The numb…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
java udr datetime problem
Hi, Ive got a Java UDR that tries to insert a row with a datetime column. e.g. java.sql.Timestamp = new Timstamp(Calendar.getTimeInMillis()); The datetime is coming back incorrectly in the inserted row. It comes back for the GMT timezone when my default is actually Central Africa…
oninit fails reporting problem with DBSPACETEMP
But in my ONCONFIG file, i have mentioned the tape device as STDIO…
-9431 Can't find system class or method or libra
oops, wrong machine notes file. 4. JRE Shared Libraries In order to ensure the JRE shared libraries are loaded properly, the following steps are necessary: a. Add the following lines at the end of /etc/ld.so.conf <$INFORMIXDIR>/extend/krakatoa/jre/bin <$INFORMIXDIR>/extend/…
Re: installing V11.5 on linux 64 bit.
This is a problem with the JRE environment on your machine. Retry your command line with the switch: -javahome none The switch forces installer to use JRE shipped with IDS. Also ensure .jvm.bin file is present in the directory where product files exist. Sundar superboer7@t-on…
//native_threads/libhpi.sl: error : 2
Have you looked at the JVP* values in the onconfig..? Specifically JVPJAVALIB JVPJAVAHOME /dbase/informix/extend/krakatoa/jre # JRE installation root directory JVPHOME /dbase/informix/extend/krakatoa # JVP log file. # The path to the JRE libraries relative to JVPJAVAHOME JVPJAV…
IDS hangs; IBM diagnoses resident memory problem
IDS 10.0FC8X6 on AIX 5.3 Our Informix instance simply packed up at a low-activity that is, it just hanged, with a "Bloked by Checkpoint" message. We took an onstat -a and AIX dump, the latter re-booting the server, after which everything came up fine. But we had a 52-minute do…
Changing TAPEDEV from script
sed -e 's/^TAPEDEV/TAPEDEV NEW-TAPEDEV/g' onconfig > onconfig.other export ONCONFIG=onconfig.other after finishing just set the ONCONFIG to your default and delete onconfig.other Sebastian…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Re: IDS as a "legacy" system...
Sigh. It doesn't matter. The point is that IDS would have been enhanced and would have taken a different direction. IDS would have been part of a successfull arrow head project and the priorities of the enhancements would have been different. (Its a different company with diffe…
Re: Wanna try SolidDB for IDS?
On Aug 10, 7:03 pm, "da...@smooth1.co.uk" <da...@smooth1.co.uk> wrote: > On 6 Aug, 13:32, Ian Michael Gumby <im_gu...@hotmail.com> wrote: > > > > > On Aug 5, 6:20 pm, "Obnoxio The Clown" <obno...@serendipita.com> > > wrote: > > > > Neil Truby said: > > > > > What particualr circu…
Installing JDBC 3.50 on Vista 64...
I have tried installing JDBC 3.50 on vista 64 and I got same errors and exceptions. As you included in your message, one of the error that you received was : "\\\\win32ppk.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform". It seems like it is trying to load IA 32-bit .dll …
Wanna try SolidDB for IDS?
On Aug 5, 6:20 pm, "Obnoxio The Clown" <obno...@serendipita.com> wrote: > Neil Truby said: > > > What particualr circumstances would it be really good for? > > Because it was designed solely as an in-memory database, the access > mechanisms and so on are roughly an order of magn…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
IDS 11.5 Install woe
Neil First if all the install script wouldn't run at all, barfing with a "Java class error" when trying to run JRE bundled with IDS. I got around this by extracting .jvm.bin etc from IDS v10 media over the top of the ones supplied in the IDS 11 tar. - IDS v10 uses JRE 1.4 wherea…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
Java JRE problem in testing IDS 11.50
Dear All... I've downloaded IDS 11.50 developement version to test in Red Hat Enterprise 5 ,while try installing it , the java jre does not work , may I ask , what is the proper version in this OS , I get jdk1.2.2 and always get segment fault while type javac !~~~ Thanks for yo…
Re: onconfig recommendations
mosserp@wellsfargo.com wrote: >> mosserp@wellsfargo.com wrote: >> >>>>> RESIDENT 0 # Forced residency flag >>>>> >>>>> >>>> (Yes = 1, No = >>>> >>>> >>>>> >>>>> >>>>> >>>> Don't know HP model numbers, but it this is a PA-RISC machine, you >>>> almost have to …
RE: onconfig recommendations
> mosserp@wellsfargo.com wrote: > >>> RESIDENT 0 # Forced residency flag > >>> > >> (Yes = 1, No = > >> > >>> > >>> > >> Don't know HP model numbers, but it this is a PA-RISC machine, you > >> almost have to set RESIDENT to -1 to prevent poor performance > >>…
Re: onconfig recommendations
mosserp@wellsfargo.com wrote: >>> RESIDENT 0 # Forced residency flag >>> >> (Yes = 1, No = >> >>> >>> >> Don't know HP model numbers, but it this is a PA-RISC machine, you >> almost have to set RESIDENT to -1 to prevent poor performance >> due to the >> archi…
RE: onconfig recommendations
> > RESIDENT 0 # Forced residency flag > (Yes = 1, No = > > > Don't know HP model numbers, but it this is a PA-RISC machine, you > almost have to set RESIDENT to -1 to prevent poor performance > due to the > architectures restrictions of only four active shar…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Re: onconfig recommendations
On Jan 2, 11:09 pm, "Kennedy, Randy" <RKenn...@scottsdaleaz.gov> wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for…
[Fwd: Re: onconfig recommendations]
Kennedy, Randy wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for given > platform. > > Current Server: HP rp5405 …
Re: onconfig recommendations
On Jan 2, 11:09 pm, "Kennedy, Randy" <RKenn...@scottsdaleaz.gov> wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for…
onconfig recommendations
Would like to receive some feedback on our onconfig setup for current platform. This is the 3rd physical server that the database has moved to and just want to ensure we are using the best settings for given platform. Current Server: HP rp5405 4-Way (650 MHz) with 8GB RAM. 1 …
Newbie question-please don't shoot me
I have a newbie question. Please pardon my lack of knowledge with this. I have a Unix server (HP) that houses 2 9.4 Informix database servers (IE: there are 2 separate onconfig files that have unique INFORMIXSERVER parm values). The informix engine stopped (I think because the un…
Informix onconfig file configuration
Hello, We recently moved from a quad proc (hyper threaded to 8), 8GB RAM to a 2 socket dual core, 16GB RAM server. In order to maximize the cores and RAM what entries need to be modified, if any? Thanks, Jared…
Configuring Java support
The JRE that shipped with IDS 10 before UC6 contained a buggy JRE. The solution is to install a newer version of the JRE. http://www-1.ibm.com/support/docview.wss?rs=0&q1=IC49819&uid=swg1IC49819&loc=en_ US&cs=utf-8&cc=us=en…
BAR_MAX_BACKUP and BAR_WORKER_MAX
What's the difference between BAR_MAX_BACKUP and BAR_WORKER_MAX. Both seem to be doing parallel/concurrent log backup. Which one should be specified in onconfig ?…
HPUX
Hi everybody, It's me again. I tried to install IDS 10 FC6 "ITANIUM" (????). First doubt: What is ITANIUM ? And what considerations do I have to do to make ODS works in this plataform. Keep typing, everytime I tried to execute the install .exe I recieved the follow message In…
Re: Pb with Krakatoa on Linux
You should have at least the following lines in the /etc/ld.so.conf.d/informix.conf file: /opt/IBM/informix/extend/krakatoa/jre/bin /opt/IBM/informix/extend/krakatoa/jre/bin/classic /opt/IBM/informix/extend/krakatoa/jre/lib Sorry for not being precise in my first reply.…
Pb with Krakatoa on Linux
Hi, I am inserting a JAR in Cheetah and I get: SQL Error (-9431): Can't find system class or method or library (/opt/IBM/informix/extend/krakatoa/jre/bin/libhpi.so). Just after executing: EXECUTE PROCEDURE sqlj.install_jar( 'file:/tmp/statbuilder.jar', 'statbuilder', 0); Of c…
Pb with Krakatoa on Linux
Hi, I am inserting a JAR in Cheetah and I get: SQL Error (-9431): Can't find system class or method or library (/opt/IBM/informix/extend/krakatoa/jre/bin/libhpi.so). Just after executing: EXECUTE PROCEDURE sqlj.install_jar( 'file:/tmp/statbuilder.jar', 'statbuilder', 0); …
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: Digital UNIX V4.0F + 7.31.FD1 Performance
Thank you, today on evening we make this changes in $ONCONFIG, restart the machine and hope it works! Greetings from Austria…
Performance profiling a UDR in Java
I've developed a Java UDR that I need to increase performance on quite a bit. Can anyone suggest a profiler (preferably free, maybe even something that snaps into Eclipse) that will allow me to see what's taking so long? Does the krakatoa jre allow standard socket connections fo…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
onconfig problem
when i try to initialize server using oninit following message appears on screen "ONCONFIG can only specify a simple filename whith no path components" plz do replay me how to solve this one…
RE: - RE: Informix Java problems [8755] - Bayesian
I am just executing the jvpcontrol function, to monitor my Java stored procedure. Regards, Kenneth Penza Systems Engineer Systems and Database Services Service Management Department Malta Information Technology & Training Services Ltd Please read our Legal Notice: http://emailp…
Informix Java problems
> I am running Informix 10.00.UC3W2 with Java on RHEL3. We are experiencing a > problem that a Java UDR starts working and randomly it stops executing and the > only way to get it working again is to restart the database server. I don't know if you're still having this problem. …
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
RE: Listing all the tables in using a dbspace in Informix
> Make sure $INFORMIXDIR and $ONCONFIG are set and that you have > permissions with your login ID to access them. There is also system > tables that can give you this information. System tables which can list out all the tables in a particular dbspace ?…
Re: onconfig
Hello, apart from editing ONCONFIG directly, some parameters are dynamically changeable: Usage: onparams ... -m <param> <value> ... -m - Modify the value of one of the following configuration parameters: AFFAIL, AFCRASH, AFW…
RE: onconfig
I don't run onbar, but I suspect you're right. LTAPEDEV, etc. would also probably be in this group as well. Either way, restore the old onconfig and you're OK. It may be a good idea to check the permissions on the file before you're done, though... --EEM -----Original Me…
Re: onconfig
I think the onbar config parameters can be changed on the fly as well. ----- Original Message ----- From: "Everett Mills" <eemills@nationalbeef.com> To: <informix-list@iiug.org> Sent: Friday, February 09, 2007 11:45 AM Subject: RE: onconfig > Stan- > TAPEDEV, TAPEBLK and TAPESI…
RE: onconfig
Stan- TAPEDEV, TAPEBLK and TAPESIZE can be modified on the fly through onconfig. Restore your old onconfig and you should be fine. --EEM -----Original Message----- From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf Of Stan Sent: Friday, …
onconfig
Hello. What will happen when during work (online state) IDS unfortunately someone modify onconfig. Which paramaters takes effect immediately (without restrart IDS). Thanks in advance Stan…
informix and java
sw wrote: > Hello, > > I'm trying to use java procedures in informix. Do you know how to do it, > where can i find toturials or examples? > > SW Java UDRs: A First Look at Java-in-the-Server http://www-128.ibm.com/developerworks/db2/zones/informix/library/samples/db_java1.html …
Informix produces error -1263 after system time is changed
Also I forgot to mention that the onconfig USEOSTIME is set to 1 (gets time from the host)…
Losing dbspaces/chunks after server shutdown
Good day all, My problem has to do with the IDS 10 server I am currently running on an IBM pServer p505 and AIX 5.3. My true setup is IDS 10.00.UC4 on AIX 5.3 rel 5: # dbaccess V --> DB-Access Version 10.00.UC4 # oslevel -r --> 5300-05 My problem occurs in the following man…
Re: infdump
couldn't we at least ask him for a tiny snippet of his online.log - maybe there's more wisdom in such file than you might imagine. Tip: set MSGPATH (in onconfig) to ... ... and don't forget to restart the engine ;-)…
HELP : All logical logs are FULL
Hi All Thanks for your response. I solved the "All logical logs are FULL" . I did the following : ShutdownServer : onmode -ky Change Onconfig : LTAPEDEV in the onconfig to /DEV/NULL Restart Server : oninit After RECOVERY : onmode -ky Change Onconfig : LTAPEDEV change…
RE: Informix Java User Defined Functions
Another source of informaion might be: http://www-128.ibm.com/developerworks/edu/dm-dw-dm-0610perrin-i.html > -----Original Message----- > From: informix-list-bounces@iiug.org [mailto:informix-list- > bounces@iiug.org] On Behalf Of Guy Bowerman > Sent: Thursday, August 17, 2006 …
Re: Performance tuning suggestions needed
On 1 Oct 2006 20:10:51 -0700, calyanram@hotmail.com wrote: >this my onconfig file. > ...onconfig file snipped... Please give us a bit more information. Hardware specs (number of CPUs, memory, OS. etc.) would be good . . . JWC…
SHMADD and EXTSHMADD
Hi, What is the difference between SHMADD and EXTSHMADD? We know the meaning of the SHMADD onconfig parameter. Thanks, Khaled Bentebal ConsultiX Email: khaled.bentebal@consult-ix.fr…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: 7.31.UD8 migration to 10.00.UC4 failed with :Con/rev: Failed to convert for Component SQL
I see it isn't going that well on your convertion sir. I was wondering how you where doing... The following is a database? ... processing tsecure ... It looks like the upgrade processed a few database before this one. I would suggest (just for fun) dropping this database and …
7.31.UD8 migration to 10.00.UC4 failed with :Con/rev: Failed to convert for Component SQL
Hi Gang, During a migration from 7.31.UD8 to 10.00.UC4 I ran into the following error during the conversion : Con/rev: Failed to convert for Component SQL. Then the engine crashed and had not been able to bring it backup due to corruption in sysmaster. Since it was a test env, …
Insider #74: Highlights: IDUG/IIUG Europe Conference Vienna October 2-6, 2006, Vnext Survey Results
IIUG Insider (Issue #74) August 2006 Highlights: IDUG/IIUG Europe Conference Vienna October 2-6, 2006, Vnext Survey Results ----------------------------------------------------------------------- Contents: ----------------------------------------------------------------------- …
DBSPACETEMP
Hello All, Just a quick question for you to ponder. Is it possible to include random dbscpaces in the DBSPACETEMP parameter with the onconfig file to prevent space problems in the temp dbspace when creating indexes etc. on very large tables?…
Informix Java User Defined Functions
1. Make sure you have a c:\\tmp directory. 2. Try changing "file:$INFORMIXDIR/extend/krakatoa/examples/Env.jar" to "file:c:/progra~1/IBM/Informix/extend/krakatoa/examples/Env.jar" 3. Make sure you have an SBSPACE configured and online and pointed to by the SBSPACENAME onconfig pa…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Re: ONCONFIG and AIX
Hi, I would enable KAIO, too. Apart from KAIO the B-Tree Scanner usually benefits from some configuration: >From my experience increasing threshold (default: 500) reduces I/O significantly, enabling range scans (rangesize=500), too. BTSCANNER num=1,prio=low,threshold=50…
RE: ONCONFIG and AIX
> -----Original Message----- > From: informix-list-bounces@iiug.org [mailto:informix-list- > bounces@iiug.org] On Behalf Of tomcaml@yahoo.com > Sent: Thursday, July 27, 2006 12:57 PM > To: informix-list@iiug.org > Subject: ONCONFIG and AIX > > Hello All, > > I am looking for feed…
ONCONFIG and AIX
Hello All, I am looking for feedback, comments, etc. We are currently on IDS 10.FC4 on HP-UX 11 - migrating to IDS 10.FC5 on AIX on an LPAR partition on the i595 I have gotten this message in the log while performing some loads/alter tables/indexes, etc in development phase.…
Parametro TXTIMEOUT
Hola, quisiera saber si alguno de ustedes me puede informar que quiere decir el parametro del onconfig TXTIMEOUT 0x12c, a cuantos segundos se refiere. Gracias de antemano. Salu2...…
Insider #71: Highlights: SAP certifies additional products on IDS 10; Conference survey
IIUG Insider (Issue #71) May 2006 Highlights: SAP certifies additional products on IDS 10; Conference survey Welcome to the International Informix Users Group (IIUG) Insider! Designed for IIUG members and Informix user group leaders, this publication contains timely and relevan…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Can't INSERT blob into specific blob space using JDBC
I tried an example with 3.00.JC3 and it works fine without having a default SBSPACENAME in the onconfig file. VG.…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Claus Samuelsen wrote: > From the spec "Oracle TimesTen In-Memory Database. (PDF)" on > http://www.oracle.com/database/timesten.html, it takes 36 microseconds > for an insert ~ 27,778 inserts per second. > > IDS with Real Time Load does 60,000 inserts per second with > simultan…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: Validating the 'SBSPACENAME' sblobspace
"Is a command-line call significantly different from file system access?" Well for SQL yes. In sysmaster.sysconfig there is a cf_effective column. This is the value in use by the database server NOW, this does not have to match the ONCONFIG value. You can change the onconfig …
Re: sqlj.install problem
Hello Guy, thanks, I could not find the vpclass parameter error. EXECUTE PROCEDURE sqlj.install_jar ('file:E:\\program\\informix\\jar\\ninesync.jar', 'ninesync_jar', 1); 9498: Incorrect path to JAR file specified: (java.io.FileNotFoundException: \\tmp\\coffee.informix.ninesync_…
Re: sqlj.install problem
Maroon, You could try two things. 1. Make sure SINGLE_CPU_VP is set to 0 in the onconfig file. 2. Try changing the VPCLASS parameter to: VPCLASS jvp,num=1 After checking 1. and changing 2. restart IDS and try again. If still no luck, try the examples in %INFORMIXDIR%\\extend\…
Re: sqlj.install problem
You didn't answer these questions: What is the exact OS and version? e.g. "XP Professional Service Pack 2" What is the IDS version (output from onstat -V)? Can you run onstat -d to confirm you have an sbspace? But from the values you pasted it looks like you're quoting "onconfig…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
v 9 stopping
search for a dir called informix (assume you installed it there) in there you should have a subdir called etc in there you should find a file called onconfig.<informixserver> search for MSGPATH which has the name of your logfile Superboer.…
Redirected restore failure
>From the backup and restore manual renaming chunks duing a restore..key considerations... "During a cold restore, ontape performs the following validations to rename chunks: 3. If renaming the primary root or mirror root chunk, it updates the ONCONFIG file parameters ROOTPATH…
hyperthreading and onconfig parameters
We are upgrading our database servers to HP ProLiant DL380 G4 two-way systems. This platform supports enabling or disabling "hyperthreading". (See, for example, http://sysadminforum.com/t36970.html.) With hyperthreading enabled, the OS (Solaris 9, x86) sees 2 logical processors …
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
RE: recording ONCONFIG changes
Tripwire or AIDE would do the trick too. -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Jonathan Leffler Sent: Thursday, July 07, 2005 2:16 AM To: informix-list@iiug.org Subject: Re: recording ONCONFIG changes mw…
Re: recording ONCONFIG changes
mweallans@panacea.co.uk wrote: > Scanning the old messages I came across a "suspicion" from Neil Truby > that IDS 9.2 was't recording all changes to ONCONFIG in the message > log. > I've recently spent many days trying to find why a problem had recurred > and eventually I discove…
recording ONCONFIG changes
Scanning the old messages I came across a "suspicion" from Neil Truby that IDS 9.2 was't recording all changes to ONCONFIG in the message log. I've recently spent many days trying to find why a problem had recurred and eventually I discovered that it was because a previous change…
Re: ONCONFIG - comments
Juan Pablo wrote: My comments below: > Hi: > Let me begin by saying thanks to all of the frequent posters to this group. > I wanted to offer my config for comments. > thanks > ============================================================ > Hola: > Muchas gracias por el tiem…
Re: ONCONFIG - comments
"Juan Pablo" <in4mixperu@hotmail.com> wrote in message news:1120173312.07d6de6c2486de67e3cad47cd40e6341@teranews... > > Hi: > Let me begin by saying thanks to all of the frequent posters to this > group. > I wanted to offer my config for comments. > thanks > ====================…
Re: ONCONFIG - comments
Juan Pablo said: > > Hi: > Let me begin by saying thanks to all of the frequent posters to this > group. > I wanted to offer my config for comments. > thanks > ============================================================ > Hola: > Muchas gracias por el tiempo y su ayuda. Est…
ONCONFIG - comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para pode…
ONCONFIG - comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
ISA: Java not working on AIX 5.2.4(64bit)
he guys. The ISA archive for AIX (1.50UC1) does not come with the JRE. For some reason the installation does not see the installed version 1.41 as valid. Anyone have any idea how to solve this? Everything is pure IBM here. Tia Robert A. Reissaus sr. Online Administator Risdi A…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
ONCONFIG comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para pod…
ONCONFIG comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG par…
RE: New installation
Yes I agree with Brian, you put something in the onconfig that required 161MB but you have defined the root dbs size 60MB that is not enought to cover all the requests. Check the PHYSFILE, LOGFILES LOGSIZE in the ONCONFIG file. If you need more help give us the full ONCONFIG. b…
Help with ONCONFIG needed
Having a problem with a client connection to an informix database. The server has two databases, db1 and db2. Each database has a separate ONCONFIG file which lists the different db names in them. ONCONFIG_db1 includes db1,but not db2 in the DBSERVERNAME/DBSERVERALIAS …
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
The onconfig FILLFACTOR
My day for asking questions ... but that is how one gains knowledge :) The lead DBA for the company for which I am now working for as a consultant wants to establish an initial FILLFACTOR of 100 for those indices that represent a serial column. Since none of the tables having a…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
Re: Functions with "restricted sql"
Isidre wrote: > I know some restictions about the sql DML use on prodedure/functions > writed with SPL. This restrictions denied the use of > functions/procedures from selects if those procedures/functions have > update/insert/delete statments. In this cases you use the > procedu…
Functions with "restricted sql"
Hi all. I know some restictions about the sql DML use on prodedure/functions writed with SPL. This restrictions denied the use of functions/procedures from selects if those procedures/functions have update/insert/delete statments. In this cases you use the procedure/funtion via …
Using JDK1.4 on IDS9.30?
I assume this is for a UDR. We ran into the same issue in IDS 9.40 which still only supports JDK 1.3 (as of the UC1 release anyway). In our case, the workaround was to convert our UDR code to a Java application running outside the engine. The application could then have its ow…
Re: no working ISA on RHEL3?
Ronald Cole <ronald@forte-intl.com> writes: > "Neil Truby" <neil.truby@ardenta.com> writes: >> You can see this Linux stuff really taking off on the home desktop pretty >> soon, can't you? > > By hardcoding version numbers in install scripts and pissing off a lot > of customers w…
RE: no working ISA on RHEL3?
See below: > -----Original Message----- > From: Ronald Cole [mailto:ronald@forte-intl.com] > Sent: Friday, October 01, 2004 1:53 AM > To: informix-list@iiug.org > Subject: Re: no working ISA on RHEL3? > > Ronald Cole <ronald@forte-intl.com> writes: > > Can someone in the know te…
Re: no working ISA on RHEL3?
Ronald Cole <ronald@forte-intl.com> writes: > Can someone in the know tell me when IBM expects to have a working ISA > in their IDS 9.40.UC4 J/Foundation? The jre1.2.2 included still > doesn't run under RHEL3 (loader complains about a missing function in > a library) and it refu…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
Q: SHMTOTAL
Can someone in the know tell me when IBM expects to have a working ISA in their IDS 9.40.UC4 J/Foundation? The jre1.2.2 included still doesn't run under RHEL3 (loader complains about a missing function in a library) and it refuses to install with the IBM 1.4.2 JVM that comes on …
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
RE: parametros ONCONFIG
Los parametros del ONCONFIG que tienes que setear para inicializar tu instancia como MINIMO son: ROOTPATH Path completo del chunk creado para almacenar el root Dbspace ROOTSIZE Tama�o del chunk en Kbytes (Ejemplo: 2048000 # 2Gb) DBSERVERNAME Nombre l�gico del server.(Eje…
parametros ONCONFIG
Me podrian ayudar con los parametros del ONCONFIG. No las tengo muy clara cada parametro, por lo que la misma me trae problemas para el momento que quiero OPTIMIZAR el servidor de bases de datos. Si alguien me puede ayudar a conocer mejor cada uno de estos parametros .... les agr…
Re: IDS9.4/AIX5.2 performace degradation
Dalibor, A piece of tuning advice that has many times hit this list, is that you should have one CLEANER per LRU. So, having LRUS = 8 implies that you should have CLEANERS=8 also, to keep up with the overhead. Ben Thompson wrote: > Dalibor Krleza wrote: > > I may have missed i…
Re: IDS9.4/AIX5.2 performace degradation
Dalibor Krleza wrote: I may have missed it in your long post, but I didn't see anything about disc layouts or number of CPUs. Also I may have missed it as well but I couldn't see any output from "onstat -g iof" or "onstat -g iov". I have commented on your onconfig anyway. > OK …
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
onconfig for analisis
Hi, I post the onconfig file for its analisis: Operating System: SuSE 9.0 RAM: 1024 Mb Informix version: 9.40 UC2 All chunks are raw devices. Thanks. #************************************************************************** # # INFORMIX SOFTWARE, INC. # # Title: onconfig…
ONCONFIG for 9.40 offered for comment
9.40 FC3W2 on HP-UX 11.11 The server has 6 cpus and 6G of RAM. 3 other, small, IDS 9.40 instances run on the server, and one small 7.31. kaio is enabled. Just put 9.40 live, and it's running about 5-10% more slowly on some key processes. This reflects what happened in testing. …
Re: OnConfig parameters tuning
Laverio wrote: > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ > 2Gb ram and 4 processors that seems very slow on a large sequential > write (I suppose that the problem resides in the dbspaces on > filesystem...). Any suggestion? The following is my standard…
Re: OnConfig parameters tuning
"Laverio" <laverioNO@z-1000.net> wrote in message news:cac7sg$e8v$1@newsreader.mailgate.org... > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram > and 4 processors that seems very slow on a large sequential write (I suppose > that the problem resides in…
Re: OnConfig parameters tuning
Laverio wrote: > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram > and 4 processors that seems very slow on a large sequential write (I suppose > that the problem resides in the dbspaces on filesystem...). Any suggestion? > > My onconfig it's set as fol…
OnConfig parameters tuning
Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram and 4 processors that seems very slow on a large sequential write (I suppose that the problem resides in the dbspaces on filesystem...). Any suggestion? My onconfig it's set as follow: # System Configura…
RE: Setting up JVM on IDS 9.30HC5, HP-UX 11i
did you check the JVP property file? did you set JVPPROPFILE onconfig parameter to point to the property file?, are the below config parametes in your onconfig file? VPCLASS JVPJAVAHOME JVPHOME JVPLOGFILE JVPPROPFILE JDKVERSION JVMTHREAD JVPJAVALIB JVPJAVAVM JVPCLASSPATH -----O…
Howto for Onconfig
Hi everyone, This is probably a question which has been asked often. But I could not find proper documentation on how to calculate and set correct parameters for Onconfig. I understand this is a complex question. But are there any articles on this ? Maybe they covered the topic …
Re: linking the C++ libs
"Martin" <imxng@bootweb.nl> writes: > I'm using SuSe Linux. > Well, IBM only offers precompiled C++ libraries as far as I know. When I > download & install the Informix Client SDK, it installs a bunch of libraries > in /opt/informix/lib/c++ which already have been compiled. Can't…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
RE: IDS 9.4 / AIX
We've also got in installed - and I don't think we had any problems with Pam or Java. Malcolm -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of sumGirl Sent: 27 April 2004 15:51 To: informix-list@iiug.org Subject: R…
Re: IDS 9.4 / AIX
Hi. You dont need either the java foundation piece or Pam to upgrade. "Wojtek Korg�l" <wkorgol@nospam.gazeta.pl> wrote in message news:<c6j4nn$jke$1@inews.gazeta.pl>... > Hi, > > I am trying to plan an ugrade process of Informix 9.3 to Informix 9.4 on AIX > 5.1. Sorry, I am ne…
IDS 9.4 / AIX
Hi, I am trying to plan an ugrade process of Informix 9.3 to Informix 9.4 on AIX 5.1. Sorry, I am new to Informix, so my questions may be silly. 1) What is a difference between IDS 9.4 and IDS 9.4 with J/Foundation? Is it possible to upgrade server if 9.3 is not with J/Foundati…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: An interesting meeting with IBM
"Scott Burns" <scott@mirrabooka.com> wrote in message news:YS5fc.1457$IH5.62698@news.optus.net.au... > Ronald Cole wrote: > > >Scott Burns <scott@mirrabooka.com> writes: > > > > > 2) many companies, mine included, will still be deploying RH9 for some > time to come. What are our…
Re: An interesting meeting with IBM
Ronald Cole wrote: >Scott Burns <scott@mirrabooka.com> writes: > > >>Ronald Cole wrote: >> >> >>>If IBM will release a version of DB2 that will run on any Red Hat OS >>>released within the past year, then I'll take a good look at it. >>> >>> >>Erm, we only finished jumping throu…
Re: An interesting meeting with IBM
--0__=08BBE4E6DF99B5A88f9e8a93df938690918c08BBE4E6DF99B5A8 Content-type: multipart/alternative; Boundary="1__=08BBE4E6DF99B5A88f9e8a93df938690918c08BBE4E6DF99B5A8" --1__=08BBE4E6DF99B5A88f9e8a93df938690918c08BBE4E6DF99B5A8 Content-type: text/plain; charset=US-ASCII Content-tran…
Re: An interesting meeting with IBM
> > >>"Captain Pedantic" <theharlequin36@hotmail.com> writes: >> >>>"Data Goob" <datagoob@hotmail.com> wrote in message >>>news:NDndc.15156$G.6949@fe09.usenetserver.com... >>> >>>>DB2 8.1 is available today for Linux. >>> >>>The installation doesnn't work because of a Java mismat…
Re: An interesting meeting with IBM
"Captain Pedantic" <theharlequin36@hotmail.com> writes: > "Data Goob" <datagoob@hotmail.com> wrote in message > news:NDndc.15156$G.6949@fe09.usenetserver.com... >> DB2 8.1 is available today for Linux. > > The installation doesnn't work because of a Java mismatch which IBM seems …
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
RE: [off-topic] Truly awful!
I think the clown is finally losing it. Never mind, I know he lost it long ago. -----Original Message----- From: Obnoxio The Clown [mailto:obnoxio@hotmail.com] Sent: Thursday, March 04, 2004 9:58 AM To: informix-list@iiug.org Subject: [off-topic] Truly awful! These two strings…
[off-topic] Truly awful!
These two strings walk into a bar and sit down. The bartender says, "So what'll it be?" The first string says, "I think I'll have a beer quag fulk boorg jdk^CjfdLk jk3s d#f67howe%^U r89nvy~~owmc63^Dz x.xvcu" "Please excuse my friend," the second string says, "He isn't null-ter…
oninit message ??
All, =20 I have just installed IDS 9.4.UC2 on AIX 5.2. Every time I start the = instance with oninit I get this message: # oninit<?xml:namespace prefix =3D o ns =3D = "urn:schemas-microsoft-com:office:office" /> WARNING : If you intend to use J/Foundation with this Server instan…
SHARED MEMORY LIMIT
Is posible to use with informix of 32 bits more than 2GB of shared memory in a Linux Machine? The base address in onconfig is: SHMBASE 0x41000000 Thanks in advance,…
RE: Whatcha' wanta have?????
Sosnowski Robert wrote: > > Web services: >>> It is becoming standard. DB2 and Oracle already have it. Also BEA Tuxedo >>> middleware. MSSQL and Sybase announced. Don't let Informix be an >>> isolated data island! >> >>It is becoming standard? Which standard? > Definitely not AN…
RE: Whatcha' wanta have?????
Web services: >> It is becoming standard. DB2 and Oracle already have it. Also BEA Tuxedo >> middleware. MSSQL and Sybase announced. Don't let Informix be an isolated >> data island! > >It is becoming standard? Which standard? Definitely not ANSI SQL standard. I see that all big …
Re: Whatcha' wanta have?????
How about a LIMIT clause (LIMIT row_count OFFSET offset) that can be used to constrain the number of rows returned by the SELECT statement like MySQL, PostgreSQL. Dorn B. ----- Original Message ----- From: "Sosnowski Robert" <robert.sosnowski@bzwbk.pl> To: <informix-list@iiug.o…
Re: Whatcha' wanta have?????
How about a LIMIT clause (LIMIT row_count OFFSET offset) that can be used to constrain the number of rows returned by the SELECT statement like MySQL, PostgreSQL. Dorn B. ----- Original Message ----- From: "Sosnowski Robert" <robert.sosnowski@bzwbk.pl> To: <informix-list@iiug.o…
Re: Whatcha' wanta have?????
Sosnowski Robert wrote: > > As for 9.6 I see 2 important things: > 1. Web services > 2. BLOB literals > > ad. 1 > Idea behind stored procedures in SQL database is very similar to that of > Web services. So it seems quite natural that database should expose its > stored procedure…
Re: Whatcha' wanta have?????
As for 9.6 I see 2 important things: 1. Web services 2. BLOB literals ad. 1 Idea behind stored procedures in SQL database is very similar to that of Web services. So it seems quite natural that database should expose its stored procedures as WEB services. I see that this is: - …
Re: Whatcha' wanta have?????
As for 9.6 I see 2 important things: 1. Web services 2. BLOB literals ad. 1 Idea behind stored procedures in SQL database is very similar to that of Web services. So it seems quite natural that database should expose its stored procedures as WEB services. I see that this is: - …
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
Changing database local / dbexport tapesize
Hi, Did you change TAPESIZE on your onconfig file? That could be the restriction! REGARDS…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Re: onconfig and sqlhosts
Hi Thomas. Administrator's Guide for Informix Dynamic Server, Version 7.3 http://www-3.ibm.com/software/data/informix/pubs/library/ids_73.html HTH. -- Tsutomu Ogiwara from Tokyo Japan. ICQ#:168106592 >From: Thomas Ronayne <trona@ameritech.net> >Reply-To: Thomas Ronayne <trona…
onconfig and sqlhosts
I've managed to blow away my installed Informix system and cannot for the life of me find the notes I had about onconfig and sqlhosts. It's version 7.30.UC5 running on Slackware 9.0 -- can someone point me at the right document in Answers for the appropriate settings? Thanks.…
RE: Upgrading Informix
Beefman asked > > I am trying to show our management the benefits of upgrading our > informix versions and would like to know the benfits of the following > upgrade. > > We currently are useing IDS 7.31.UD4 on AIX 4.3 as well as I-4GL > 7.20.UE2 on the same platform. > > I would…
Re: Onconfig file parameters
Sometimes even the ontape parameters (TAPEDEV, LTAPEDEV, TAPESIZE, etc.) are not dynamic. What you can do is change a parameter in the onconfig file and then dump out the reserve page that holds the onconfig parameters with: oncheck -pP 1 1 Hope this suggestion helps. Brice Av…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Re: Creating Index
Hi Isidre. onstat -k has a lock ? e.g) Informix Dynamic Server Version 9.30.UC3 -- On-Line -- Up 27 days 03:56:10 - - 28080 Kbytes Locks address wtlist owner lklist type tblsnum rowid key#/bsiz 0 active, 2000 total, 2048 hash buckets, 0 lock table overflows …
Creating Index
Hi all. I have a problem when creating index. After build a index I can't build other on same table after 3 o 4 minutes. I receive an error "the table is locked". Environment: Solaris 2.6 IDS With J/Foundation 9.21.UC3 HDR running. Any idea about that? PS Sorry for my engl…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
RE: HPL Unloading error [1467]
Here's my onconfig file SHMVIRTSIZE 147456 SHMADD 8192 SHMTOTAL 0…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
Re: Passport Advantage problems
"David E. Grove" <david_grove@correct.state.ak.us> writes: > Over a year ago, at the suggestion of our sales reps, we switched from > OpenLine Support to Passport Advantage. We understood that OpenLine, pe se, > was disappearing, and that all customers would be moving to Pssport…
onconfig file
The system administrator at my current site thought he would be very clever and he linked the onconfig files to different directories using ln -s. We have now discovered that these links are being lost when we use onmonitor and replaced by a local file, but not when we use vi. I…
How to preserve state between calls to java UDRs
I'm trying to write a stored procedure in Java (UDR as it is called in Informix) and execute it from an ODBC or a JDBC client. First, I don't know any better discussion group to ask my question than here. Can anybody tell me where I can find more about combining Java and Informi…
IDS 9.4 with J/Foundation
This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C3127E.7FE96F90 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, =20 I=B4ve just downloaded IDS 9.4 from IIUG web site but I've notice it = doesn't have…
IDS 9.4 with J/Foundation
This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C3127E.7FE96F90 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, =20 I=B4ve just downloaded IDS 9.4 from IIUG web site but I've notice it = doesn't have…
IDS 9.4 with J/Foundation
Hi all, I´ve just downloaded IDS 9.4 from IIUG web site but I've notice it doesn't have J/Foundation. Does anybody know if IIUG has plans to post that as well? Or, even better, is there a place where we can download it from? Best regards Claudio Acquaviva…
IDS 9.40 J/Foundation
Can anybody tell me if IDS 9.40 with J/Foundation has been released yet? I know 9.40 has. I am currently running 9.30.UC2 with J/Foundation on Linux. Thanks Peter…
Washington Area (DC) Informix Users Group - Training Day 3/21/2001
Washington Area (DC) Informix Users Group ----------------------------------------- Training Day For Informix Database and SQL Users ------------------------------------------------ Wednesday, March 21, 2001 Sponsored by the GMU Department of Information and Software Engineering…
Re: Server-side ad hoc querying and reporting tools
Rich I wrote an applet which runs in a browser and allows the user to select a database (alias), either select pre-defined queries or to type a query in and click run. The query and database name is sent to a servlet on the webserver machine which connects to the requested datab…
WAIUG Training Day 2001 - March 21, 2001
Washington Area (DC) Informix Users Group ----------------------------------------- Training Day For Informix Database and SQL Users ------------------------------------------------ Wednesday, March 21, 2001 Sponsored by the GMU Department of Information and Software Engineering…
any jdbc users?
Hi Folks, We're getting up-to-speed with informix (9.21.UC3-2 on Red Hat Linux 6.2 and JDK 1.3), and we're encountering a surprising number of problems with the latest driver (2.20). Tech support is working on one of them, but a couple more have cropped up today, making it a han…
Re: INITIALIZE vs LET
On Tue, 19 Dec 2000, William Rice wrote: >Jonathan Leffler <jleffler@informix.com> wrote: >> "ART KAGEL, BLOOMBERG/ NEW YORK" wrote: >> > ----- Original Message ----- >> > To: mdstock@mydas.freeserve.co.uk >> > At: 12/18 17:13 >> > >> > What likely happened is that you FETCHED th…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
IDS 7.31.Txx Windows NT Alaramprogram
i have change the path in the onconfig-file and restart the server but the alarmprogram will not be start if a event (logs) a generated! thomas…
Translating SPL to Java
I am in the process of translating some SPL routines into Java. I am curious how others approached solving the following types of issues: * In SPL you are able to do DATE math similiar to the following: IF (((pMer_EndDate - pMer_StartDate)::INTERVAL DAY TO DAY)::VARCHAR(3))::I…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Re: JDBC installation's problem
This is not Informix problem but JDK. I installed jdbc 2.1 without any problems. Earlier I installed jdbc 1.5 with JDK 1.8. Why you install jdbc 1.5 if you have JDK 1.3 ? Jdbc 1.5 was builded for JDK-1.x. May be problem in this? Try to install jdbc 2.1. Good luck. Sergey. Fel…
JDBC installation's problem
Hi, i'm trying to install JDBC 1.5. My server is linux red hat 6.2 and the JDK version is 1.3. I launch the setup program "java setup" and follow the interactively installation of JDBC driver but at the end of this, the installation program will say "Cant find VM" Someone kno…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
Re: ONCONFIG History
put it under source code control? SCCS and RCS are free tools and dont take too much resources. HTH Sujit testNews <mtabunda@amellar.com> on 10/04/2000 09:05:30 PM Please respond to testNews <mtabunda@amellar.com> To: informix-list@iiug.org cc: Subject: ONCONFIG History I…
RE: ONCONFIG History
Look at your online message log onstat -c |grep MSG -----Original Message----- From: testNews [mailto:mtabunda@amellar.com] Sent: Wednesday, October 04, 2000 9:06 PM To: informix-list@iiug.org Subject: ONCONFIG History Is there a way to know/track the changes made to ONCONFIG …
RE: ONCONFIG History
Changes are recorded in the message log at startup. Wayne E. Martin Informix Database Administrator Kmart Corp. -----Original Message----- From: testNews [mailto:mtabunda@amellar.com] Sent: Thursday, October 05, 2000 12:06 AM To: informix-list@iiug.org Subject: ONCONFIG History…
ONCONFIG History
Is there a way to know/track the changes made to ONCONFIG files?…
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
TBLSPACE_STATS
Hi, what is the meaning of TBLSPACE_STATS variable in onconfig file? thank in advance.…
Object Translator 2.0 (XML/Java/J2EE tool) Beta
Hi Kannan, It is still in progress. Object Translator is just one of a number of projects currently underway, it deals with the majority case where people have relational data they need to be able to publish out as XML. There is also work underway working on storage of XML as …
Re: XML instllation is failed.
In article <IlTn5.2$sU5.8495@news.pacbell.net>, "Ben Wilde" <pollyben@pacbell.nospam.net> wrote: Hi Ben. I try your message. > JVPJAVAHOME c This environment is wrong. My JVPJAVAHOME is "/informix/IIF2000/9.21.UC1-1/extend/krakatoa" and change JVPJAVALIB "/lib/sparc". …
Encryption...
Carrying on from what Art said... You could use (with Foundation.2000) Java-in-the-database and standard encryption libraries from people such as IAIK (http://jcewww.iaik.tu-graz.ac.at/) to manage the process of reading/writing the data in and out of the columns. You would be a…
Query Optimization: Wrong execution plan?
Xavi Tarafa Mercader wrote: > Any suggestion about how to improve the query performance? Set OPTCOMPIND parameter ( in onconfig file ) to 0. > Xavi. Leonid.…
Informix 7.20 + jdbc + locale
I try to make jdbc connection to database (Informix 7.30, SCO Unix) which have no jdk supported encoding, so my java application terminates with error: "encoding or code set not supported". How can I enforce jdbc driver to ignore code set translation (and this way make it not to …
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Re: JDBC SqlException: System Internal Error..help?
We saw the same error on Linux. We solved it by replacing Blackdown JDK with Sun or IBM. You should also consider an upgrade to Linux. Go at least to 6.1. You can do the upgrade by way of RPM's relatively simple. "Mary Remillard" <maryr@informix.com> wrote in message news:39591…
WSTATS and Performance
Hi, does anybody know the performance degradation by setting WSTATS 1 in the onconfig file? Is this 1%, 5% or 10% ??? TIA Ruediger Papke…
JDBC-Driver: Error -7203 / DBNLS is not set ...
using Informix Dynamic 7.10 on Solaris with enviroment variable LANG=de and DBNLS=1 trying to access my database with JDK 1.2.2/ Informix JDBC Driver jdbc211jc1 from NT, follwing error message appears: java.sql.SQLException: DBNLS is not set or LC_COLLATE must be 'com.informix.…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
problem in informix JDBC driver 1.50.JC1
Hi, After installing JDBC type 4 Driver version1.50.JC1, while I try to connect, I am getting the following error. Could you please help me out. I am using SUN JDK 1.1.8. JDBC API 1.x. Informix host (HPLEY1) is HP UX B.10.20. And the Informix version is 7.20. And the database is…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
JDBC driver problems withDynamic Server 2000
Hi We have taken over a project to use informix as the store for a web site and I have downloaded the trial versions of Dynamic Server 2000 and an Informix JDBC driver (ifxjdbc.jar v2.0) from intraware. When I try to use the JDBC driver it prints up the message: This release of…
Informix JDBC driver
Hi all! I try to use Informix JDBC driver with jdk 1.1.8. The database has default locale setting, though in some fields are stored strings with russian (cp1251) codeset. So, i need make conversion. But with JDBC-ODBC bridge coming with Sun JDK i can use code like byte[] cv = rs…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
Installing JDBC drivers on HP UX
does your jdk match the download? Nona >Subject: Installing JDBC drivers on HP UX >From: "Martin, Wayne E." WMartin@kmart.com >Date: 12.04.00 17:19 W. Europe Daylight Time >Message-id: <8d25tk$ck$1@news.xmission.com> > > >Question to one and all, > > >I am getting a "unable to …
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
JDBC SqlException: System Internal Error..help?
Hi all, I'm developing a rather simple application to parse raw data files and insert them into a given database. Unfortunately I'm experiencing (from what I can tell) random SQLExceptions. Below is a stacktrace() of what I'm running into (it usually occurs after a few megabytes…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
Re: Memory problems? Please help.
>>What is the connection type? shm or soc ? >> >What are these? See NETTYPE in your onconfig file. HTH Michael…
VB code needed to synchronize
>Subject: VB code needed to synchronize >From: rob9966@hotmail.REMOVETHISPART.com (Rob) >Date: 16.03.00 08:33 W. Europe Standard Time >Message-id: <38d08e0c.9021907@goliath.newsfeeds.com> > >Is there a way to synchronize data that I've gathered and put in a >recordset with an In…
VB code help needed for Adding, Deleting, Modifying, and Compare
Yeah, and like you we all have the time to relearn yet another C-styled based language. Get real bud. > Uninstall VB6 and install JDK 1.22 and JDBC 2.11.JC1 and put your application > in a browser where it belongs. > > Nona…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
Re: JDBC and JDK1.3RC1
Ashish I read some time back that the Informxi JDBC driver after 1.40 (I think) needs to run on JDK 1.2. The reason is that JDK 1.2 incorporates the SQLJ standard, and (probably) because the JDBC classes now use JDK 1.2-only calls. So if you have changed your JDBC driver recent…
JDBC and JDK1.3RC1
I am having trouble running my application. The same application worked with the previous releases of the JDK and now it throws an exception - java.sql.SQLException: This release of JDBC requires to be run with JDK 1.2+. at com.informix.util.IfxErrMsg.getSQLException(Ifx…
No Krakatoa?
Hi Zandy, Jonathan is correct, you need Foundation.2000. Unfortunately someone has mistakenly put IDS.2000 up on the Foundation.2000 page for the Solaris download, so there is no J/Foundation (Krakatoa) as you discovered. So apologies for wasting your time, I will contact Intr…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
Is JDBC What I need?
I have a 4.10 SE running on an SCO Openserver system and developing version 3 D4GL programs to run against this engine. I would like to write a complicated routine using an object oriented language and I have version 1.1.7 of the JDK and JSDK 2. What would I need to do to get J…
Re: informix server issue
From: squreshi <squreshi@bbn.com> > >I can't seem to connect to an informix online v5.x database using >jdbc1.5 > >I have jdk 1.1.7 The path and classpath are set. > >It gives me error -908 > >I am on the same machine as the database server. (client and server on >same machine) T…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
informix server issue
I can't seem to connect to an informix online v5.x database using jdbc1.5 I have jdk 1.1.7 The path and classpath are set. It gives me error -908 I am on the same machine as the database server. (client and server on same machine) TBCONFIG and INFORMIXDIR are already set. I ca…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Re: Dumb question
Sorry all, I think I found the answer to my own dumb question in the documentation (last place I would have thought to look). "The database server uses the ONCONFIG file during initialization" >Is it safe to edit my onconfig file when the database is live ? > >Or should I stop…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: JDBC Driver 1.22
Try registering the driver as: DriverManager.registerDriver((Driver) Class.forName("com.informix.jdbc.IfxDriver").newInstance()); Best Regards, Octav Mathias Kalb wrote: > > I use the Informix JDBC Driver (Version 1.22) to connect to an Informix > database (Dynamic Server, 7.x…
JDBC Driver 1.22
I use the Informix JDBC Driver (Version 1.22) to connect to an Informix database (Dynamic Server, 7.x) from within a Java application (JDK Version 1.1.6). At first, I load the driver with the method: Class.forName("com.informix.jdbc.IfxDriver"); But when I try to get a conne…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Re: JDBC connection to Informix personal edition
Yogesh As documented on the intraware site, the JDBC 2.0 needs a JDK 1.2 (I think) or it will not work. Perhaps this is the problem? HTH Sujit yap123@my-deja.com on 10/08/99 11:39:21 AM Please respond to yap123@my-deja.com To: informix-list@iiug.org cc: (bcc: Sujit Pal)…
silent truncation of varchar data
I am wondering if anybody else has come across this problem, with 7.3X on Windows NT where extra characters are silently truncated when writing a VARCHAR to the database. For example if I try to store the word 'foobar' in a VARCHAR(5) Informix does not return an error, but only …
Connection pool pb using jdbc
Hello, I'm using a connection pool, but I get some strange errors : All is working fine except that sometimes I get : System or internal error java.io.IOException: Broken pipe But all the connection are checked (isClosed) by the pool before sending back. I'm using th…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Lock Table Overflow - onconfig
We get an error in the Informix log-file. Lock table overflow. What do we have to change in the onconfig-file ? Kind Regards, Franky Thiel franky.thiel@Infohos.be…
Setting up shared memory connection
Did you add the DBSERVERALIASES line in the onconfig file? -- James Edmiston Quest Information Systems, Inc. www.questisinc.com…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
Re: ontape in HP-UX
You need verify the sintax of onconfig file for this entries: TAPEDEV /dev/rmt/0m # Tape device path TAPEBLK 512 # Tape block size (Kbytes) TAPESIZE 7800000 # Maximum amount of data to put on tape (Kbytes) (This is my onconfig fil…
JDBC Problems
I am getting a consistant error when trying to install the JDBC driver on Win9x machines. This happens with both the JDBC 2.0 and 1.5 versions. I run: java -verbose setup and it outputs everything that it is loading until I get to: [Loaded sun.net.www.ParseUtil from C:\\PROG…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Add database requires JDK1.2+ ??
We tried the "supported" Informix JDBC v1.4, but it has problems with views, so all the tables come through, but they have no columns defined. At one time I had success with version 2.00, but I'm rebuilding, and must have done something slightly different this time. Now, whenev…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Re: Informix 7.3 UC5 on RH Linux 5.2
Additional INFO: Please see attached "sqlhosts" and ONCONFIG files...…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Problem with multiple connections.
Hello, everyone! I have a Java program, that uses Informix JDBC driver to create a pool of connections with Informix database(let's say 100).When the program executes it only opens a certain number of connections about 50 and then fails giving the error msg Attempt to connect t…
Re: Informix JDBC2.00_JC1 + Sun's HotSpot VM
Here is informix's response: I have had a look through out knowledge base and on the 6th of May (last Thursday) a bug was raised for this problem. I've subsequently managed to access the JDBC2.0 source and I believe that this bug was raised in error and will be closed by R&D wi…
Re: Informix JDBC2.00_JC1 + Sun's HotSpot VM
Hello Joerg, I have identical problem and logged a call with informix last friday, they are still looking at it ! I will broadcast informix's response when available, Cheers, Paul. In article <3736A0DE.EEAC599F@Dresdner-Bank.com>, Joerg Schneider <Joerg.Schneider@Dresdner-B…
Informix JDBC2.00_JC1 + Sun's HotSpot VM
Hello everybody, I tried out the latest Informix JDBC driver (Version 2.00 JC1) and found out that the demo's work with the Classic Java 1.2.1 VM. After installation of the HotSpot-Engine for JDK 1.2.1 the driver came up with a message that it needs to be run in a JDK 1.2 envir…
Re: onconfig parameters
> onstat -c shows you the contents of the ONCONFIG file, but then so does vi > $INFORMIXDIR/etc/$ONCONFIG. Perhaps I did not understand the question? Does onstat -c reflect changes made by onmode commands? I should try that and see...that, to me, would be the compelling reason …
Re: onconfig parameters
Thomas onstat -c shows you the contents of the ONCONFIG file, but then so does vi $INFORMIXDIR/etc/$ONCONFIG. Perhaps I did not understand the question? HTH Sujit "Thomas G. Smith" <tsmith@wdn.com> on 04/28/99 12:19:10 PM Please respond to "Thomas G. Smith" <tsmith@wdn.com> …
onconfig parameters
Is there a command to force the engine to show me what all the onconfig parameters (and other perhaps unknown parameters) have been set to?…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
JDBC driver install problems
I'm trying to install the Informix JDBC Driver version 1.22 for IDS w/ UDO 9.x On Solaris 2.6. Running setup (jdk 1.1.7) returns this message: Extracting installation code..................................done java.lang.UnsatisfiedLinkError: initAgent at sun.tools.debug…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
onconfig tuning
Hi all! I have posted to the web my collection of notes on onconfig parameters. It is not yet complete but pretty far along. http://home.earthlink.net/~mildness/bamph/informix.htm It has helped me over the years to have this list in my PDA. If you think it useful feel free…
CGI or data director for web?
Hi, What is better to use? I've to make an application which should connect to a Informix Universal Server 9.01 (HP_UX 10.20). The client is a PC (Win95, NT, Next 4.2) with HTML and jdk 1.1.6. What are advantages and drawbacks for cgi? and for data director? Thanks…
JDBC (lev.4) driver for Informix
I'm looking for a JDBC (lev. 4) java driver for JDK 1.2 Anyone knows something about it? Thanx in advance Andrea…
Applets and JDBC
Deal All, I'm using IUS 9.13 and JDBC driver 1.40. My client applet run on a local file system on NT machine and the database server is running on a UNIX machine. My problem is when I am running applets with appletviewer on JDK 1.1.6 it works fine. However, When I change it to …
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Regarding calling an INFORMIX procedure from a UNIX shell script
I use dbaccess for this purpose. Syntax is "dbaccess <database> <text file with sql commands>. Just be sure your informix environment variables are set properly (INFORMIXSERVER, ONCONFIG).…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Re: IECC Server Discovery Failed 2nd
Hi Dale, sorry for not reading your article correctly: Are both agents running admagent and osagent ? If so, when you run stopsa, do both stop? If not, kill them and run startsa again. Is your onconfig still up to date? The agents seem to take all information from onconfig ra…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
JDBC Problems with Informix SE on Linux
Hi, I've problems with connecting my Informix-SE 7.42 DBMS (running on SuSE Linux 5.2; JDK 1.1.3) to the JDBC driver (fourth category) accessible at the Informix Developer Network. I tried the examples distributed with the driver but without success. Who can help me ? I need the…
Why the applet can't connect to the database server remotely ?
Hi All, I programmed a java applet using informix object interface for java(RMICredentials) to connect to the informix dynamic server on my machine. It can connect to the database server if runed on my compuer , but if i run it on other compuers remotely, the applet can be star…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Updating databases
What must be done,eg onconfig, to get the fastest result on updating a database alter tables, inserts etc.…
Re: [help] Informix JDBC driver setup.
Hi, Well on my SCO OpenServer 5.0.4 platform the latest JDK is 1.1.3 and the Informix JDBC driver works fine. Huw > >Check the release notes carefully. It said JDK 1.1.5 or later. > > >> How can I setup jdbc driver for informix. >> >> ( informix universal server 9.12, solaris…
Re: [help] Informix JDBC driver setup.
Check the release notes carefully. It said JDK 1.1.5 or later. c.h park wrote: > > Hello. > > I download JDBC driver for informix from intraware for solaris 2.5.1 > Two file is contained, > 1. install.txt 2. setup.class > > And setup sequence is so simple. > prompt> java …
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
ONCONFIG on UNIX
What kind of use if the parameter "SYSALARMPROGRAM" for. And which input parameters are used. Thanks for mailing to baumschlager@pfeiffer.co.at…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: How to set CLASSPATH in windows NT4.0
WuGang Zhao wrote: > > Anyone can tell me how to set CLASSPATH when i install informix JDBC in > Windows NT4.0 Environment ? Thanks in advance. > > ------------------------------------------------------------ > 2. Be sure your CLASSPATH environment variable points to version > …
Re: How to set CLASSPATH in windows NT4.0
WuGang Zhao wrote: >Anyone can tell me how to set CLASSPATH when i install informix JDBC in >Windows NT4.0 Environment ? Thanks in advance. > > >------------------------------------------------------------ >2. Be sure your CLASSPATH environment variable points to version > 1.1.…
How to set CLASSPATH in windows NT4.0
Anyone can tell me how to set CLASSPATH when i install informix JDBC in Windows NT4.0 Environment ? Thanks in advance. ------------------------------------------------------------ 2. Be sure your CLASSPATH environment variable points to version 1.1.5 or later of the Java Deve…
sizes in onconfig
OWS 7.2 on SCO UNIX: Does anybody know why all sizes of dbspaces or logs, etc. are just half as big as they are in the onconfig file. If I check the size of a dbspace, for example, its file size is 2 GByte, but oncheck -pe says it's 1 GByte. Thanks in advance, Pascal…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
Re: Doubt regarding L.Log size
Sadagopan, Sathish wrote: > > Hi, > LOGSIZE in the onconfig is shown as 1000 Kb, whereas size in onstat -l shows > > a figure of 5000 , Page size is 2K. > How can that be ? It looks like someone used onparams to add logfiles with sizes different from that stored in the onconfig.…
Doubt regarding L.Log size
Hi, LOGSIZE in the onconfig is shown as 1000 Kb, whereas size in onstat -l shows a figure of 5000 , Page size is 2K. How can that be ? TIA Sathish…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Re: What is best JDBC driver for Informix
In article <35751C60.8A3A7059@staps.de>, Kemal Soysal <Kemal@staps.de> wrote: > > But be carefull,... it is not fully java compatible with informix !!!! > I reported a bug with the version 5 of informix database OnLine,... > I think it is still persisting. Or you take the ones …
Re: What is best JDBC driver for Informix
Allan Gould wrote: > You could try our JDBC/ODBC driver: SCO SQL-Retriever. Take a look at > http://www.sco.com/vision/products/sqlretriever/ for more information and > a downloadable eval. > > Allan Gould > (allang at sco dot com) > (Please remove anti-spam measures if replyin…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Problem with DataDirector for Java
Hi, I had a problem with Data Director for Java ("error unmarshaling return header" running an applet) and I solved it upgrading Jdk from 1.1.3 to 1.1.5. Now my problem is that I can't run the applet from a client. Which browser can I use? Is it a problem with the browser? I'm …
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
My weird problems
Thanks to all who replied. The Logical Log problem was with memory parameters in the onconfig file. DBSPACETEMP problem still exists however Regards Lee Robertson…
Onconfig Question
I sent this a few weeks ago and didn't get any responses. I am rephrasing the heading and trying again. We are not currently having any performance problems, but I am interested in hearing some opinions from the experts out here. One of our systems is as follows: Sun SPARCcen…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Information on Data Director for Java
Hi, is enough to build and run a Data Director application to install on an NT machine: 1. Informix-WGS 7.20 + Netscape Fast Track Web Server 2. JDK 1.1.3 3. Data Director Deployment for Windows NT 4. Data Director for Java Regards, -- Alberto Guerrieri STRHOLD Sistemi EDP E-…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Re: How to make Informix RMI Java API work in Internet Explorer 4.0
"Tan Aik Khoon" <panadol@singnet.com.sg> wrote: :Hi there, : :Is there any work around to allow Informix RMI Java Classes work in IE4.0 ? : :Any help is greatly appreciated. : :Thanks, :Aik Khoon. As far as I know Microsoft has decided not to support RMI. Microsoft are total fo…
Re: Freeing Logical Log with Status U
What's LOGFILES set to in your onconfig file? Try forcing a checkpoint? Jon.…
Re: Symantec Visual Cafe Pro?
william@carsinfo.com (William Harris) wrote: :In article <60gb4a$b0b@hpaneqb4.an.hp.com>, kistler@an.hp.com says... :>Anyone using this tool for Informix database access? :> :>..and what version database are you using....? OnLine 5.X, 7.X, 9.X...? :> :>..running on what OS...? …
PRESS: An Open Letter to Informix Customers, Partners, and
An Open Letter to Informix Customers, Partners, and Shareholders=20 September 22, 1997=20 Today, Informix announced that we will require additional time to complete the financial audit we started in August, and also that we have some new rough estimates of the amount of the fin…
Re: JDBC driver for Illustra?
E.M.F.Kalvelagen (emfh7@alley.fel.tno.nl) wrote: : I wrote one recently. Docs are in : http://illusion.fel.tno.nl/mijdbc/mijdbc.html *** this should read: http://illusion.fel.tno.nl/erwin/mijdbc/mijdbc.html : If you are interested you can have it (drop me a mail) : provided yo…
New Informix JDBC Drivers
OpenLink Software is pleased to announce availability of the latest release of its High-Performance JDBC Drivers for JDK 1.02 & JDK 1.1. These Drivers are available in Type 1 and Type 3 format supporting the following database engines : Informix, Oracle, Sybase, MS SQL Server, …
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Re: Web-DB architectures?
Knut Barten wrote: > > Where else can I find infos? On the web I found ACM, OSF, W3C but didn't > found that much useful information about that subject. > Check out java.sun.com for JDBC section on database connectivity in Java. You might also like to take a look at dbANYWHERE wh…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: Informix "Data Director for Java"
In article <33B3943C.72BB@symantec.com>, Paul says... > >> I am realy interested as we are now starting with Java development. >> >Hi Nils > >You may be interested to know that Informix and Symantec havea >strategic alliance for Symantec's Java products and Informix have >adopted…
Re: Informix "Data Director for Java"
> I am realy interested as we are now starting with Java development. > Hi Nils You may be interested to know that Informix and Symantec havea strategic alliance for Symantec's Java products and Informix have adopted Visual CAfe Pro as their preferred Java development tool. We w…
c-isam isopn error with Java JNI call
hi all, Does anybody use C-ISAM 7.1 with Java JNI? When I call isopen from JNI, it returns a -1. I checked the informix error message but it says nothing more about this error. so i decided to print out "errno" after the failed call. the errno = 14 which is "EFAULT" (bad addres…
Re: Printing a canvas in a jdbc-odbc app on Win 95/NT
Peter C. Gomez wrote: > > Hi, > > Has anyone tried to use JDK1.1's graphics printing capabilities in a > jdbc-odbc application? > > After printing, the Java VM crashes without any exception. The same problem > occurs using the odbc-jdbc bridge to MS access as well as Informix 7.2…
Printing a canvas in a jdbc-odbc app on Win 95/NT
Hi, Has anyone tried to use JDK1.1's graphics printing capabilities in a jdbc-odbc application? After printing, the Java VM crashes without any exception. The same problem occurs using the odbc-jdbc bridge to MS access as well as Informix 7.2. I can provide more details, but fo…
Re: Resizing Logical Logs
Also, there is a MAXLOGS parameter in the onconfig file that should be increased. Madison Pruet…
Re: ONCONFIG
Kerry Davids wrote: > > Jacob Salomon <jake@apparel.net> wrote: > > >Patrick, > > >onconfig.std is meant as a template to copy from. If I had my druthers, > >I would have it shipped with 666 permissions so that even user Informix > >could not (or at least is less likly to) inadv…
Re: ONCONFIG
>From: satriguy@aol.com (SaTriGuy) >Date: 21 Jan 1997 06:01:04 GMT >X-Informix-List-Id: <news.32813> > >If I had my way, I'd remove it from the system all together so that it >would not be possible to 'accidentally' use the wrong onconfig. ;) >Madison Pruet I think the 'it' refe…
Re: ONCONFIG
If I had my way, I'd remove it from the system all together so that it would not be possible to 'accidentally' use the wrong onconfig. ;) Madison Pruet…
Re: ONCONFIG
Jacob Salomon <jake@apparel.net> wrote: >Patrick, >onconfig.std is meant as a template to copy from. If I had my druthers, >I would have it shipped with 666 permissions so that even user nformix >could not (or at least is less likly to) inadvertently modify it. >(Actually, in …
RE: ONCONFIG
Hi Patrick! OK. please check with env command to see the ONCONFIG environment variable, this sould containg the file being use at this moment, and please, make a copy before you make any changes, Regards :) ---------------------------------------------------------------- Mario…
RE: ONCONFIG
You have to check your env variables. One of them is ONCONFIG which will be set to either of the files. Munaf g086mnf@bomplant3.appl.ge.com ---------- From: informix-list-owner[SMTP:informix-list-owner@rmy.emory.edu] Sent: Friday, January 17, 1997 4:04 PM To: informix-list S…
Re: ONCONFIG
In <32DF327E.1DBB@mediacity.com.sg>, Patrick Stacey wrote: }I see 2 onconfig files in my etc directory (sol 2.5.1 platform). } }one has .ifmx and the other .std } }which do I edit in order to change the system configuration? }Specifically I want to configure informix for a multip…
Re: ONCONFIG
Patrick, Type the command "onstat -c | more". This option prints a copy of the current configuration to the screen, but more importantly, the second line gives the path and filename of the current configuation in use. Tracy > > I see 2 onconfig files in my etc directory (sol …
Re: ONCONFIG
If you have to ask this you shouldn't attempt to modify the file. This is RTFM, very much so. You'll depend on knowing so much before tuning OnLine in this way that if you have missed this in the manuals, you may also have missed a lot of other info. Sorry for this. I don't mean …
Re: ONCONFIG
Patrick Stacey wrote: > > I see 2 onconfig files in my etc directory (sol 2.5.1 platform). > > one has .ifmx and the other .std Patrick, onconfig.std is meant as a template to copy from. If I had my druthers, I would have it shipped with 666 permissions so that even user nform…
ONCONFIG
I see 2 onconfig files in my etc directory (sol 2.5.1 platform). one has .ifmx and the other .std which do I edit in order to change the system configuration? Specifically I want to configure informix for a multiprocessor machine (4 CPUs actually). many thanks, /pks -- [ Pat…
Re: Symantec Cafe Pro (JAVA) Support for Informix
Contact WebLogic http://www.weblogic.com It is currently in beta, it is the same driver that Informix will sell you when it is released. We have used it from Solaris to Informix 7.1, 7.2, and 8.1. I think it only works with JDK 1.1, but ask them to be sure, it might work with …
Re: Help I'm in crisis
Hi Tony, Check you $ONCONFIG file if the PDQPIORITY > 0, modify it to be 0, that means disable PDQ in $ONCONFIG. Please set PDQPIORITY as user environment variable for large report/ bach job only. Otherwise, every single session takes a lot of memory. Regards Eric Lam Taipei/Tai…
Re: onconfig
Hi Sue, >Hi there. I am an Oracle/Sybase dba. I've just been put on a project >which uses Informix Workgroup Server V7.12 on Windows NT. I have no >training or manuals in either Informix or NT, so this question may >appear to come from a simpleton. Stop right there. Go and fin…
Re: onconfig
> From: Sue Alsbury <salsbury@mdshealth.com> > Date: Friday, October 18, 1996 4:11 PM > > Hi there. I am an Oracle/Sybase dba. I've just been put on a project > which uses Informix Workgroup Server V7.12 on Windows NT. I have no > training or manuals in either Informix or NT, so …
Re: onconfig
In article <3267E47A.54DA@mdshealth.com>, Sue Alsbury <salsbury@mdshealth.com> writes >Hi there. I am an Oracle/Sybase dba. I've just been put on a project >which uses Informix Workgroup Server V7.12 on Windows NT. I have no >training or manuals in either Informix or NT, so this …
onconfig
Hi there. I am an Oracle/Sybase dba. I've just been put on a project which uses Informix Workgroup Server V7.12 on Windows NT. I have no training or manuals in either Informix or NT, so this question may appear to come from a simpleton. I issue a select * from tablename. The tab…
Re: java and informix online version 5.05
> I would like a pointer in the right direction with regard to the > following; > I have a hp-ux server running hp-ux 10.10 which hosts a version 5.06 > Infromix engine. > I also have a pc running windows95 and a copy of jdk 1.0 > > any ideas in getting the two to talk woul…
java and informix online version 5.05
Help, I would like a pointer in the right direction with regard to the following; I have a hp-ux server running hp-ux 10.10 which hosts a version 5.06 Infromix engine. I also have a pc running windows95 and a copy of jdk 1.0 any ideas in getting the two to talk would be gr…
Re: test please delete!!
Ken Crismon (kcrismon@sybase.com) wrote: : I think I made it! : ---------- : From: informix-list-owner : To: informix-list : Subject: Re: java and informix version 5.06 : Date: Thursday, October 03, 1996 11:09AM : ittechsupport@enterprise.net (Support Wing) wrote: : :HELP : …
java and informix version 5.06
HELP I have a pc running windows95 which has the jdk 1.0 installed on it , I would like to perform simle(at first) queries on an Online Engine running on a HP platform under the 10.10 operating system any clues ?…
test please delete!!
I think I made it! ---------- From: informix-list-owner To: informix-list Subject: Re: java and informix version 5.06 Date: Thursday, October 03, 1996 11:09AM ittechsupport@enterprise.net (Support Wing) wrote: :HELP : I have a pc running windows95 which has the jdk 1.0 …
Re: java and informix version 5.06
ittechsupport@enterprise.net (Support Wing) wrote: :HELP : I have a pc running windows95 which has the jdk 1.0 installed on it , :I would like to perform simle(at first) queries on an Online Engine :running on a HP platform under the 10.10 operating system any clues ? I haven't…
Re: Java and Informix
alexb <alexb@email.intranet.com> wrote: :What do I need to access Informix database from a stand alone Java :application residing on a host on which Informix On-Line server is :running? : I have Informix 7.12 on AIX. I got JDK for AIX and generic JDBC from :SunSoft. Do I need…
Java and Informix
What do I need to access Informix database from a stand alone Java application residing on a host on which Informix On-Line server is running? I have Informix 7.12 on AIX. I got JDK for AIX and generic JDBC from SunSoft. Do I need JDBC driver for Informix? Thanks for all ans…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: Sizing of char,varchar and text fields
Alexander J. Oss (alex.oss@films.com) wrote: : I believe that is not just a rumor about taking up at : least one block for each BLOB entry (and our block size : is also 2k). : You could try keeping the files outside of the database, : and store only the filenames inside... I t…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
Process Priority with onilne 4.10
Does Online ver 4.10 have fixed priority support like ver 7.0 does with the NOAGE onconfig param. Thanks Chris…
GIS'94 - CFP
CALL FOR PAPERS 2nd ACM WORKSHOP ON ADVANCES IN GEOGRAPHIC INFORMATION SYSTEMS December 1-2, 1994 - NIST, Gaithersburg, Maryland, USA Sponsored by ACM …